Abstract:A hybrid convective‐infrared‐rotary drum (CIRD) dryer was designed and fabricated to examine the drying behavior of the green pea under different experimental conditions. In this study, the effect of temperature was evaluated at three levels (40, 55, and 70°C); while the infrared (IR) power and drum rotation speed were also varied in three levels: 250, 500, and 750 W and 5, 10, and 15 rpm, respectively. The effect of these three variables was assessed on the drying, durability extension and quality of the green peas. Drying of green pea with CIRD method by the following conditions: air temperature, IR power and drum rotation speed enhanced the drying rate, the variations in the effective moisture diffusion coefficient, rehydration ratio, total phenol content, and antioxidant capacity. In addition, increasing temperature, IR power, and rotary speed reduce the color changes and specific energy consumption. The highest effective moisture diffusion coefficient, rehydration ratio, total phenol content, and antioxidant capacity were 1.58 × 10−11 m2/s, 2.19 ± 0.13, 12.99 ± 0.35 mg GAE/g dry sample, and 75.73 ± 0.82%, respectively. Moreover, the lowest specific energy consumption, color variation, and pH were 107.49 ± 0.88 MJ/kg, 44.40 ± 0.51, and 4.98 ± 0.11, respectively. The highest qualitative and nutritional preservation belonged to the highest air temperature, maximum IR power, and highest drum speed. Practical applicationsToday, drying is not only a way to store foodstuffs, but it is also known as a way to increase the value added to food products. Extracting water from a product under controlled conditions reduces the moisture of foods to a certain level and prevents microbial growth that causes foods to spoil. One of the main goals of modern food technology is to maximize nutrient protection during the process and storage. In addition, antioxidant compounds reduce the risk of developing a variety of cancers and cardiovascular disease by eliminating free radicals and active oxygen.

Heat transfer enhancement in rotary drum dryer by incorporating jet impingement to accelerate drying rate

Enhanced Heat Transfer with Swirl Duct under Rolling and Pitching Environment

Optimal Design of an Angular Box for a Mixed Flow Grain Dryer

An Investigation of Heat Transfer of Flexible Fibers in a Rotating Drum Dryer Using the Discrete Element Method

Enhancing heat and moisture transfer of porous fabrics using arrayed opposed jets: Experimental and numerical investigations

Heat Transfer Enhancement in Tubular Heat Exchanger with Jet Impingement: A Review

Heat transfer of cohesive particles in a rotary drum: Effect of material properties and processing conditions

A review of the impinging stream dryer

Numerical Investigation of the Effect of Surface Wettability and Rotation on Condensation Heat Transfer in a Sludge Dryer Vertical Paddle

Drum Drying of Black Liquor Using Superheated Steam Impinging Jets

Study on heat and mass transfer characteristics in drying process of drum dryer based on the DEM-CFD coupled method

Experimental investigation of conduction heat transfer in a rotary drum using infrared thermography

Development of an empirical correlation to predict the effectiveness of heat and mass transfer from textiles in a rotating drum

Impacts of hybrid (convective‐infrared‐rotary drum) drying on the quality attributes of green pea

Some aspects of heat transfer in rolling mode rotating drums operated at low to medium temperatures

DEM investigation of heat transfer in a drum mixer with lifters

Convective heat transfer analysis in aggregates rotary drum reactor

Theoretical and experimental research on heat and mass transfer in a turbine thin layer dryer

A Study for Estimating the Overall Heat Transfer Coefficient in a Pilot-Scale Indirect Rotary Dryer

An efficient correlation for heat and mass transfer effectiveness in tumble-type clothes dryer drums

Heat and Mass Transfer in Agitated, Co-, or Countercurrent Conductive–Convective Heated Drum Dryer