Abstract:Abstract Cyclone venturi dryer is suitable for drying materials with large particle size and wide distribution. The working process of cyclone venturi dryer is a very complicated three-dimensional and turbulent motion, so it is difficult to be studied theoretically and experimentally. In order to study the internal flow characteristics of the biomass particle cyclone venturi dryer, the computational fluid dynamics (CFD) software was used to simulate the gas-solid two-phase flow field inside the cyclone venturi dryer. The continuous phase adopts the Realizable k-ε turbulence model and the particle phase is discrete. The effects of different injection volume on the pressure, velocity, and temperature fields inside a cyclone venturi dryer were analyzed. The results showed that the maximum pressure drop and velocity change inside the dryer were at the venturi pipe. The wet material of the cyclone venturi dryer was inhaled into the venturi contraction tube by the negative pressure formed after the highspeed airflow was ejected, thus the mixture was completed in the venturi throat. The wood debris material was mixed with the high-speed hot gas flow in the venturi throat and then sprayed into the diffusion pipe. In the diffusion pipe of venturi, the heat and mass transfer process of wet wood debris and heat flow in venturi diffusion tube was completed. It is in good agreement with the simulation results. This study can provide a reference for the optimization design of the related cyclone venturi dryer structure.

Drum Drying of Black Liquor Using Superheated Steam Impinging Jets

Performance analysis of natural convection biomass operated grain dryer coupled with latent heat storage medium

Fluidized Bed Drying and Devolatilization of Lignite Washery Tailing Particles: Experiments and Modeling

A novel sub-pilot-scale direct-contact ultrasonic dehydration technology for sustainable production of distillers dried grains (DDG)

Performance analysis of a novel biomass-fired grain dryer integrated with thermal storage medium

Research on Sludge Drying Characteristics in a Double-Axis Paddle Dryer by Coupling Markov Chain and Penetration Theory

Heat transfer enhancement in rotary drum dryer by incorporating jet impingement to accelerate drying rate

Superheated steam drying and its applicability for various types of the dryer: The state of art

Theoretical and experimental research on heat and mass transfer in a turbine thin layer dryer

An Investigation of Heat Transfer of Flexible Fibers in a Rotating Drum Dryer Using the Discrete Element Method

Kinetics of Sludge Superheated Steam Drying and Optimization of Process Parameters

Study on heat and mass transfer characteristics in drying process of drum dryer based on the DEM-CFD coupled method

Heat and Mass Transfer in Agitated, Co-, or Countercurrent Conductive–Convective Heated Drum Dryer

Computer simulation of a rotary dryer. Part II: Heat and Mass Transfer

Superheated Steam Dryer application for drying of sticky and pastry materials – particluar referens to distillers wet grain and solubles (DWGS)

Superheated Steam Drying of Solid Fuels: Wood Biomass and Lignite

Numerical Simulation and Analysis of Effect of Injection Volume on Biomass Particle Cyclone Venturi Dryer

A review of the impinging stream dryer

Newly designed superheated steam dryer bearing heat recovery unit: Analysis of energy efficiency and kinetics of Kelp drying

Design, construction and performance evaluation of paddy rice solar drum dryer equipped with perforated drum