Abstract:In this work, the packaging design and development of a high voltage (> 15 kV), high current (120 A) silicon carbide (SiC) multi-chip power module (MCPM) will be presented. The module implements a MCPM packaging strategy which itself uses subassemblies to reduce manufacturing costs through reworkability. The use of solderless internal connections aids in reducing cost both by simplifying the assembly process as well as enabling a high level of flexibility in the manufacturing process in order to drive down costs by increasing yield. A wire bondless flip-chip die interconnection scheme has been developed in parallel with a more traditional wire bonded method. Both presented approaches utilize a common set of parts with minimal differences due to the divergent portions of each interconnection scheme. Device neutrality in this design ensures that a variety of die types from any manufacturer may be housed in a number of arrangements depending on the requirements of the end-use application without requiring significant redesign effort for each new application or improvement in device technology. The SiC MCPM is constructed using high temperature capable materials, enabling operation at high junction temperatures. This leads to the ability to design a small, low profile module with low parasitic inductances and a small junction to case thermal resistance. A low module thermal resistance makes it possible to significantly reduce the size and complexity of the cooling systems, ultimately, reducing the size of the system. Thus, this novel high voltage SiC MCPM represents a significant step forward in high voltage switching applications. This paper discusses the overall mechanical design of the SiC high voltage MCPM; the three-dimensional finite-element modeling and analysis of the thermal and electrical characteristics of the high voltage power module are also presented.

Power Cell Design and Assessment Methodology Based on a High-Current 10-kV SiC MOSFET Half-Bridge Module

Power Cell Design and Assessment Methodology Based on a High-Current 10-kV SiC MOSFET Half-Bridge Module

ZVS range extension of 10A 15kV SiC MOSFET based 20kW Dual Active Half Bridge (DHB) DC-DC converter

Design and validation of a novel semiconductor area optimised 3300 V SiC half bridge for MMC

Design of a 10 kV SiC MOSFET-based high-density, high-efficiency, modular medium-voltage power converter

Dynamic Performance of 6.5kV/400A SiC MOSFET Module and its Gate Driver

10-kV SiC MOSFET Power Module With Reduced Common-Mode Noise and Electric Field

Overvoltage Protection of Series-Connected 10kV SiC MOSFETs Following Switch Failures in MV 3L-NPC Converter for Safe Fault Isolation and Shutdown

Fabrication and Dynamic Switching Characteristics of 6.5kv400a SiC MOSFET Module

High Temperature Direct Double Side Cooled Inverter Module for Hybrid Electric Vehicle Application

Design and Current Balancing Optimization of A 1700V/1000A Multi-chip SiC Power Module

A Double-Sided Cooling 6.5kv SiC MOSFET Power Module with Insulation Enhancement Design

Design and Evaluation of a 1200-V/200-A SiC Three-Level NPC Power Module

High-Density Current-Transformer-Based Gate-Drive Power Supply With Reinforced Isolation for 10-kV SiC MOSFET Modules

Design of 1500v/200kw 99.6% Efficiency Dual Active Bridge Converters Based on 1700V SiC Power MOSFET Module

Hardware Design and Demonstration of a 100kw, 99% Efficiency Dual Active Half Bridge Converter Based on 1700V SiC Power MOSFET

The Design and Development of a 15 kV SiC Half-Bridge Multi-Chip Power Module for Medium Voltage Applications

A Highly Efficient Power Block with Series Connection of Power SiC MOSFETs‐design, Characterization and Assessment in MV Converters

10 Kv SiC MOSFET Based Boost Converter

A Quasi-Two-Level Medium-Voltage SiC MOSFET Power Module with Low Loss and Voltage Self-Balance