Abstract:We report a significant enhancement in the thermoelectric power of PEDOT by fabricating a novel ternary composite film by incorporating Bi 2 Te 3 and rGO. A series of five samples of PEDOT:PSS/Bi 2 Te 3 /rGO ternary composite films were synthesized using a spin coating method and having different weight% (0.0, 0.1, 0.2, 0.3 wt%) of rGO in PEDOT:PSS/0.4 wt% Bi 2 Te 3 mixture along with pure PEDOT:PSS sample. The Seebeck coefficient, electrical conductivity, and power factor increased in composite films compared to pure PEDOT:PSS films. Incorporating rGO enhanced charge carrier mobility because of its highly conductive network, whereas Bi 2 Te 3 provided higher Seebeck coefficients owing to its inherent thermoelectric properties. PEDOT:PSS offered mechanical flexibility and a conductive matrix, facilitating effective phonon scattering and inherently lower thermal conductivity. The sample (PEDOT:PSS/0.4 wt% Bi 2 Te 3 /0.1 rGO wt%) demonstrated the highest electrical conductivity of 1522.4 S cm −1 , a Seebeck coefficient of (+) 24.7 μV K −1 , and a power factor of 93.16 μW m −1 K −2 at room temperature. These values represent a twelve-fold increase compared to pristine PEDOT films. A flexible, printable thermoelectric generator (TEG) was also demonstrated on polyimide substrate using inks prepared from p-type PEDOT:PSS/Bi 2 Te 3 /rGO and n-type PVDF/Ni NWs. The paper TEG achieved a maximum power output of 242.1 nW, with an output voltage of 9.84 mV and an output current of 49.21 μA at a temperature difference (Δ T ) of 35 K. XRD, Raman spectroscopy SEM, and XPS techniques were used to understand the underlying mechanism. This novel PEDOT:PSS/Bi 2 Te 3 /rGO ternary composite film significantly outperforms previously reported organic thermoelectric materials. The results indicate that the combined effect of PEDOT:PSS, Bi 2 Te 3 , and rGO greatly enhances thermoelectric performance, offering a promising and efficient route for the application of PEDOT in advanced thermoelectric conversion processes.

A high-performance and flexible thermoelectric generator based on the solution-processed composites of reduced graphene oxide nanosheets and bismuth telluride nanoplates

Bi 2 Te 3 -based flexible thermoelectric generator for wearable electronics

Defect-engineered Reduced Graphene Oxide Sheets with High Electric Conductivity and Controlled Thermal Conductivity for Soft and Flexible Wearable Thermoelectric Generators

High-performance flexible wavy-structure thermoelectric generator based on (Bi, Sb)2Te3 films for energy harvesting

Synthesis of Thermoelectric Nanocomposites by Incorporating Reduced Graphene Oxide

Achieving High Thermoelectric Performance in Bi2(Te, Se)3 Thin Film with (00 l)-Oriented by Incorporating Tellurization and Selenization Processes

Exploring Material Properties and Device Output Performance of a Miniaturized Flexible Thermoelectric Generator Using Scalable Synthesis of Bi2Se3 Nanoflakes

High‐Performance Flexible Thermoelectric Devices Based on All‐Inorganic Hybrid Films for Harvesting Low‐Grade Heat

Achieving High Thermoelectric Performance in Bi 2 (Te, Se) 3 Thin Film with (00 l )-Oriented by Incorporating Tellurization and Selenization Processes

Improved thermoelectric performance of PEDOT:PSS/Bi2Te3/reduced graphene oxide ternary composite films for energy harvesting applications

Sandwiched Graphene/Bi2Te3/Graphene Thermoelectric Film with Exceptional Figure of Merit for Flexibility

High-performance flexible thermoelectric generators with tunable in-plane and out-of-plane architectures

Flexible power generators by Ag2Se thin films with record-high thermoelectric performance

Solution-processed Two-Dimensional Layered Heterostructure Thin-Film with Optimized Thermoelectric Performance

Encapsulated Ag2Se-based Flexible Thermoelectric Generator with Remarkable Performance

High thermoelectric performance of flexible nanocomposite films based on Bi2Te3 nanoplates and carbon nanotubes selected using ultracentrifugation

Flexible Bi2Te3/PEDOT nanowire sandwich-like films towards high-performance wearable cross-plane thermoelectric generator and temperature sensor array

Microstructure Optimization in the Shear‐Exfoliated Bi6Cu2Se4O6 through Introducing Reduced Graphene Oxide Leads to Wide‐Ranged Thermoelectric Performance

Flexible Thermoelectric Generators With Ultrahigh Output Power Enabled By Magnetic Field-Aligned Metallic Nanowires

Optimization of the geometric parameters and structural design of a flexible thermoelectric generator for efficient energy harvesting to power wearable electronics

Flexible Micro Thermoelectric Generator based on Electroplated Bi2Te3