Abstract:The development of wearable thermoelectric generators (w-TEGs) toward light weight, economy and high power generation performance can provide more opportunities for their application in self-powered wearable electronics. The existing w-TEGs lack insight into the physical parameter coupling between the substrate and TE legs, which leads to inefficient utilization of temperature difference and deterioration of power generation performance. In this work, the comprehensive thermal management for heat collector, TE legs and heat radiator is carried out by finite element simulation. It is found that increasing the thermal conductivity of the substrates for heat collection and dissipation is conducive to reducing the optimal fill factor and substrate thickness, and improving the power density, thus facilitating the w-TEG to be both comfortable to wear, economical, and functional. Specifically, a laminated film with good flexibility prepared from polyimide (PI) film and graphene assembly film (GAF) acts as the substrate of w-TEG. The PI film compensates and enhances the mechanical strength of the laminated substrate; the GAF with large thermal conductivity reduces the in-plane and out-of-plane thermal resistance of the laminated substrate, which contributes to the heat collection of the bottom substrate; and the GAF with high emissivity enhances the radiative heat transfer and facilitates the heat dissipation of the top substrate, which is cut into blocks without affecting the electrical path to ensure overall flexibility of the w-TEG. When the w-TEG with laminated substrate and fill factor of 10% (four w-TEG units connected in series, 20 × 145 mm2 in plane) is worn on the wrist for running (contact pressure: 0 KPa, wind speed: 3 ms-1), the optimal output voltage and power density reach 281.6 mV and 45.6 μWcm-2, respectively, which is one of the best results among the recently reported heatsink-less w-TEGs. This work provides guidance for optimizing the output performance of w-TEG and accelerate the development of self-powered electronics.

High-performance flexible wavy-structure thermoelectric generator based on (Bi, Sb)2Te3 films for energy harvesting

Bi 2 Te 3 -based flexible thermoelectric generator for wearable electronics

Flexible Bi2Te3/PEDOT nanowire sandwich-like films towards high-performance wearable cross-plane thermoelectric generator and temperature sensor array

Design of a Wearable Thermoelectric Generator for Harvesting Human Body Energy

Flexible Bi2Te3-based thermoelectric generator with an ultra-high power density

Structural Design for Wearable Self-Powered Thermoelectric Modules with Efficient Temperature Difference Utilization and High Normalized Maximum Power Density

High-Performance W-Doped Bi0.5Sb1.5Te3 Flexible Thermoelectric Films and Generators

High-performance flexible thermoelectric generators with tunable in-plane and out-of-plane architectures

High‐Performance Flexible Thermoelectric Devices Based on All‐Inorganic Hybrid Films for Harvesting Low‐Grade Heat

Extraordinary self-powered Y-shape flexible film thermoelectric device for wearables

Initiating a Stretchable, Compressible, and Wearable Thermoelectric Generator by a Spiral Architecture with Ternary Nanocomposites for Efficient Heat Harvesting

Design and Fabrication of Wearable Thermoelectric Generator Device for Heat Harvesting

Flexible micro thermoelectric generators with high power density and light weight

Flexible, self‐powered thermoelectric module for body‐heat recovery

Achieving High Thermoelectric Performance in Bi2(Te, Se)3 Thin Film with (00 l)-Oriented by Incorporating Tellurization and Selenization Processes

High-performance, thin-film thermoelectric generator with self-healing ability for body-heat harvesting

Bi 2 Te 3 -based wearable thermoelectric generator with high power density: from structure design to application

Vertically Designed High-Performance and Flexible Thermoelectric Generator Based on Optimized PEDOT:PSS/SWCNTs Composite Films

High-Performance Wearable Bi2Te3-Based Thermoelectric Generator

Optimized thermal design for excellent wearable thermoelectric generator

Stretchable Thermoelectric Generators Based on Bulk Bi2Te3 and Liquid Metals