Abstract:We report a significant enhancement in the thermoelectric power of PEDOT by fabricating a novel ternary composite film by incorporating Bi 2 Te 3 and rGO. A series of five samples of PEDOT:PSS/Bi 2 Te 3 /rGO ternary composite films were synthesized using a spin coating method and having different weight% (0.0, 0.1, 0.2, 0.3 wt%) of rGO in PEDOT:PSS/0.4 wt% Bi 2 Te 3 mixture along with pure PEDOT:PSS sample. The Seebeck coefficient, electrical conductivity, and power factor increased in composite films compared to pure PEDOT:PSS films. Incorporating rGO enhanced charge carrier mobility because of its highly conductive network, whereas Bi 2 Te 3 provided higher Seebeck coefficients owing to its inherent thermoelectric properties. PEDOT:PSS offered mechanical flexibility and a conductive matrix, facilitating effective phonon scattering and inherently lower thermal conductivity. The sample (PEDOT:PSS/0.4 wt% Bi 2 Te 3 /0.1 rGO wt%) demonstrated the highest electrical conductivity of 1522.4 S cm −1 , a Seebeck coefficient of (+) 24.7 μV K −1 , and a power factor of 93.16 μW m −1 K −2 at room temperature. These values represent a twelve-fold increase compared to pristine PEDOT films. A flexible, printable thermoelectric generator (TEG) was also demonstrated on polyimide substrate using inks prepared from p-type PEDOT:PSS/Bi 2 Te 3 /rGO and n-type PVDF/Ni NWs. The paper TEG achieved a maximum power output of 242.1 nW, with an output voltage of 9.84 mV and an output current of 49.21 μA at a temperature difference (Δ T ) of 35 K. XRD, Raman spectroscopy SEM, and XPS techniques were used to understand the underlying mechanism. This novel PEDOT:PSS/Bi 2 Te 3 /rGO ternary composite film significantly outperforms previously reported organic thermoelectric materials. The results indicate that the combined effect of PEDOT:PSS, Bi 2 Te 3 , and rGO greatly enhances thermoelectric performance, offering a promising and efficient route for the application of PEDOT in advanced thermoelectric conversion processes.

Improved thermoelectric performance of PEDOT:PSS/Bi2Te3/reduced graphene oxide ternary composite films for energy harvesting applications

Improved Thermoelectric Performance of Free-Standing PEDOT:PSS/Bi2Te3 Films with Low Thermal Conductivity

Polyaniline/Graphitic Carbon Nitride/Reduced Graphene Oxide Ternary Nanocomposite Film for Flexible Thermoelectric Application

Enhanced Thermoelectric Properties of Coated Vanadium Oxynitride Nanoparticles/PEDOT:PSS Hybrid Films

Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)-based thermoelectric composite films

PEDOT:PSS/graphene quantum dots films with enhanced thermoelectric properties via strong interfacial interaction and phase separation

A Polymer Film with Very High Seebeck Coefficient and Overall Thermoelectric Properties by Secondary Doping, Dedoping Engineering and Ionic Energy Filtering

Conductive PEDOT:PSS-Based Organic/Inorganic Flexible Thermoelectric Films and Power Generators

High performance Ag2Se/Ag/PEDOT composite films for wearable thermoelectric power generators

PEDOT-based thermoelectric composites: Preparation, mechanism and applications

PEDOT:PSS Films With Very High Thermoelectric Properties Through Water‐Swollen Assisted Reduction With a Tetrakis(dimethylamino)ethylene Solution

Great Enhancement in the Seebeck Coefficient and Thermoelectric Properties of Solid PEDOT:PSS Films Through Molecular Energy Filtering by Zwitterions

Synthesis of Thermoelectric Nanocomposites by Incorporating Reduced Graphene Oxide

Fabrication of PEDOT: PSS-PVP Nanofiber-Embedded Sb2Te3 Thermoelectric Films by Multi-Step Coating and Their Improved Thermoelectric Properties

Flexible Bi2Te3/PEDOT nanowire sandwich-like films towards high-performance wearable cross-plane thermoelectric generator and temperature sensor array

Direct synthesis of highly conductive poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS)/graphene composites and their applications in energy harvesting systems

PEDOT:PSS/PVA/Te ternary composite fibers toward flexible thermoelectric generator

Enhanced thermoelectric performance of conducting polymer composites by constructing sequential energy-filtering interfaces and energy barriers

A hierarchical design for thermoelectric hybrid materials: Bi2Te3 particles covered by partial Au skins enhance thermoelectric performance in sticky thermoelectric materials

Bi0.5Sb1.5Te3/PEDOT:PSS-based flexible thermoelectric film and device

Great Enhancement in the Seebeck Coefficient of PEDOT:PSS by Polaron Level Splitting via π–π Overlapping with Nonpolar Small Aromatic Molecules