Abstract:This study focuses on the nanostructure engineering of PEDOT thin films, fabricated via the oxidative chemical vapor deposition (oCVD) method with antimony pentachloride (SbCl5) as the oxidant. By controlling deposition temperature and π–π stacking distance, significant improvements in carrier mobility (23.58 ± 1.71 cm2 V−1s−1) and thermoelectric power factor (112.57 ± 4.33 μW m−1 K−2) are achieved, demonstrating the correlation between nanostructure and enhanced thermoelectric performance. Air‐stable, lightweight, and electrically conductive conjugated polymers have attracted significant attention for thermoelectric applications, especially in low‐temperature environments. However, their low carrier mobility has limited broader adoption. This study addresses this challenge by investigating the nanostructure of poly(3,4‐ethylenedioxythiophene) (PEDOT) thin films fabricated via oxidative chemical vapor deposition (oCVD) at various deposition temperatures. Through systematic control of the semi‐crystalline orientation and π–π stacking distance, a substantial enhancement in carrier mobility (23.58 ± 1.71 cm2 V−1 s−1) and electrical conductivity (6345 ± 210 S cm−1) is achieved. The thermoelectric power factor demonstrates a direct correlation with deposition temperature, achieving a maximum value of 112.57 ± 4.33 μW m−1 K−2. PEDOT thin films fabricated at higher deposition temperatures show minimal reductions in electrical conductivity as absolute temperature decreased, reflecting a lower resistivity ratio and extended metallic state, as indicated by the metal–insulator transition in the Zabrodskii plot. Incorporating the Seebeck coefficient into the parabolic energy band diagram revealed strong agreement between theoretical and experimental carrier mobility, while also indicating that the energy barrier for intercrystalline charge transport decreases as deposition temperature increases. The highly face‐on orientation and reduced π–π stacking distance in PEDOT thin films facilitate quasi‐1D conduction, thereby enhancing carrier mobility.

Enhanced Thermoelectric Properties of Coated Vanadium Oxynitride Nanoparticles/PEDOT:PSS Hybrid Films

Tailoring P-N Conversion in All-solid-state Polymer Composites with A Record Ionic Thermopower

A Polymer Film with Very High Seebeck Coefficient and Overall Thermoelectric Properties by Secondary Doping, Dedoping Engineering and Ionic Energy Filtering

Vanadium Oxide Nanoparticles Doped Polymer to Modulate Thermal Emissivity

Great Enhancement in the Seebeck Coefficient of PEDOT:PSS by Polaron Level Splitting via π–π Overlapping with Nonpolar Small Aromatic Molecules

Great Enhancement in the Seebeck Coefficient and Thermoelectric Properties of Solid PEDOT:PSS Films Through Molecular Energy Filtering by Zwitterions

Boosting the Seebeck Coefficient for Organic Coordination Polymers: Role of Doping-Induced Polaron Band Formation.

Significant Enhancement in the Seebeck Coefficient and Power Factor of p-type PEDOT: PSS through the Incorporation of n-type MXene.

Improved thermoelectric performance of PEDOT:PSS/Bi2Te3/reduced graphene oxide ternary composite films for energy harvesting applications

Enhanced thermoelectric performance of conducting polymer composites by constructing sequential energy-filtering interfaces and energy barriers

Enhanced Carrier Mobility and Thermoelectric Performance by Nanostructure Engineering of PEDOT Thin Films Fabricated via the OCVD Method Using SbCl5 Oxidant

Achieving high thermoelectric properties in PEDOT:PSS/SWCNTs composite films by a combination of dimethyl sulfoxide doping and NaBH4 dedoping

Fabrication of PEDOT: PSS-PVP Nanofiber-Embedded Sb2Te3 Thermoelectric Films by Multi-Step Coating and Their Improved Thermoelectric Properties

Electrochemical doping tuning of flexible polypyrrole film with enhanced thermoelectric performance

Study of thermoelectric properties in the PEDOT:PSS/Te double-layer thin film devices

Facile Fabrication of Highly Flexible, Porous PEDOT:PSS/SWCNTs Films for Thermoelectric Applications

Synthesis of PEDOT/CNTs Thermoelectric Thin Films with a High Power Factor

Thermoelectric Properties of Flexible PEDOT:PSS/Polypyrrole/Paper Nanocomposite Films

Utilizing perylene diimmide as dopant to improve thermoelectric performance of PEDOT:PSS films

Enhanced thermoelectric performance of PEDOT: PSS films via ionic liquid post-treatment

PEDOT:PSS/graphene quantum dots films with enhanced thermoelectric properties via strong interfacial interaction and phase separation