Significant Enhancement in the Seebeck Coefficient and Power Factor of p-type PEDOT: PSS through the Incorporation of n-type MXene.

W. Feng,R. Venkatesh,Xizu Wang,Jianyong Ouyang,Xin Guan

DOI: https://doi.org/10.1021/acsami.9b21185

2020-02-25

Abstract:Thermoelectric (TE) materials are important for the sustainable development because they can directly convert heat into electricity. Intrinsically conductive polymers have been attracting considerable attention because of their advantages over inorganic TE materials. But their TE properties particularly the Seebeck coefficient must be greatly enhanced for practical application. In this work, MXene (Ti3C2Tx), an n-type 2D material, is blended into p-type poly(3,4-ethylenedioxythiophene): polystyrenesulfonate (PEDOT:PSS). The Seebeck coefficient of the composites increases with the increasing MXene loading at the MXene loading below 33 wt% and then decreases with the further increase of the MXene loading. MXene can enhance the Seebeck coefficient from 23 up to 57.3 µV K-1 and the power factor from 44.1 up to 155 µW m-1 K-2. It is the first time to observe the enhancement in the Seebeck coefficient of a p-type TE polymer by an n-type filler. The enhancement in the Seebeck coefficient is ascribed to energy filtering of charge carriers by the internal electric field arising from the electron transfer from MXene to PEDOT:PSS. The internal electric field can filter the charge carriers with low energy and thus enhance the Seebeck coefficient.

Medicine,Engineering,Physics,Materials Science