Synergistically Boosting Thermoelectric Performance of PEDOT:PSS/SWCNT Composites via the Ion-Exchange Effect and Promoting SWCNT Dispersion by the Ionic Liquid

Wenjiang Deng,Liang Deng,Zhipeng Li,Yichuan Zhang,Guangming Chen
DOI: https://doi.org/10.1021/acsami.1c01059
2021-03-05
Abstract:Poly(3,4 ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is perhaps the most successful polymer material for thermoelectric (TE) applications. So far, treatments by high-boiling solvents, acid or base, or mixing with the carbon nanotube (CNT) are the main ways to improve its TE performance. Herein, we report the synergistically boosting TE properties of PEDOT:PSS/single-walled CNT (SWCNT) composites by the ionic liquid (IL). The composites are prepared by physically mixing the SWCNT dispersion containing the IL with PEDOT:PSS solution and subsequent vacuum filtration. The IL additive has two major functions, that is, inducing the phase separation of PEDOT:PSS and a linear quinoid conformation of PEDOT and promoting the SWCNT dispersion. The maximum power factor at room temperature reaches 182.7 ± 9.2 μW m<sup>–1</sup> K<sup>–2</sup> (the corresponding electrical conductivity and Seebeck coefficient are 1602.6 ± 103.0 S cm<sup>–1</sup> and 33.4 ± 0.4 μV K<sup>–1</sup>, respectively) for the free-standing flexible film of the PEDOT:PSS/SWCNT composites with the IL, which is much higher than those of the pristine PEDOT:PSS, the IL-free PEDOT:PSS/SWCNT, and the SWCNT films. The high TE performance of composites can be ascribed to synergistic roles of the ion-exchange effect and promotion of SWCNT dispersion by the IL. This work demonstrates the dual roles for the IL in regulating each component of the PEDOT:PSS/SWCNT composite that synergistically boosts the TE performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01059?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01059</a>.Diameter distribution parameters based on Gaussian distribution, optical photographs, water contact angles, SEM–EDS analysis, zoomed comparison of Raman spectra, and XPS general scan analysis (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01059/suppl_file/am1c01059_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology
What problem does this paper attempt to address?
The problem this paper attempts to address is the improvement of the thermoelectric performance of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)/single-walled carbon nanotube (SWCNT) composites. Specifically, the researchers aim to enhance the thermoelectric performance of the composite by introducing ionic liquids (IL), utilizing their ion exchange effect to promote SWCNT dispersion. The paper mentions that untreated PEDOT:PSS films have low conductivity due to the excessive insulating PSS component wrapping around the conductive PEDOT core and the coiled conformation of the PEDOT chains. Therefore, the researchers explored a method of physically mixing SWCNT dispersions containing IL with PEDOT:PSS solutions and preparing the composites through vacuum filtration, with the goal of improving their thermoelectric performance. Using this method, the researchers achieved a maximum power factor of 182.7 ± 9.2 μWm^-1K^-2 for the composite at room temperature, a value significantly higher than that of pure PEDOT:PSS, PEDOT:PSS/SWCNT composites without IL, and pure SWCNT films. This indicates that IL not only induces phase separation of PEDOT:PSS and the formation of linear quinoid conformations through ion exchange but also effectively promotes the dispersion of SWCNTs, thereby significantly enhancing the electrical conductivity and thermoelectric performance of the composite.