Abstract:We examined the effects of aluminum (Al) capping layer thickness on the electrical performance and stability of high-mobility indium–gallium–tin oxide (IGTO) thin-film transistors (TFTs). The Al capping layers with thicknesses (tAls) of 3, 5, and 8 nm were deposited, respectively, on top of the IGTO thin film by electron beam evaporation, and the IGTO TFTs without and with Al capping layers were subjected to thermal annealing at 200 °C for 1 h in ambient air. Among the IGTO TFTs without and with Al capping layers, the TFT with a 3 nm thick Al capping layer exhibited excellent electrical performance (field-effect mobility: 26.4 cm2/V s, subthreshold swing: 0.20 V/dec, and threshold voltage: −1.7 V) and higher electrical stability under positive and negative bias illumination stresses than other TFTs. To elucidate the physical mechanism responsible for the observed phenomenon, we compared the O1s spectra of the IGTO thin films without and with Al capping layers using X-ray photoelectron spectroscopy analyses. From the characterization results, it was observed that the weakly bonded oxygen-related components decreased from 25.0 to 10.0%, whereas the oxygen-deficient portion was maintained at 24.4% after the formation of the 3 nm thick Al capping layer. In contrast, a significant increase in the oxygen-deficient portion was observed after the formation of the Al capping layers having tAl values greater than 3 nm. These results imply that the thicker Al capping layer has a stronger gathering power for the oxygen species, and that 3 nm is the optimum thickness of the Al capping layer, which can selectively remove the weakly bonded oxygen species acting as subgap tail states within the IGTO. The results of this study thus demonstrate that the formation of an Al capping layer with the optimal thickness is a practical and useful method to enhance the electrical performance and stability of high-mobility IGTO TFTs.

Floating Ni Capping for High-Mobility p-Channel SnO Thin-Film Transistors

Polymer Coating Enabled Carrier Modulation for Single-Walled Carbon Nanotube Network Inverters and Antiambipolar Transistors

Mobility improvement of LTPS thin film transistor using stacked capping layer

High-Performance Top-Gate Thin-Film Transistor with an Ultra-Thin Channel Layer

Exceedingly High Performance Top-Gate P-Type SnO Thin Film Transistor with a Nanometer Scale Channel Layer

Channel thickness effect on the performance of amorphous SiZnSnO semiconductor thin-film transistor with metal capping structure

Mobility and Current Boosting of In-Ga-Zn-O thin-film transistors with Metal Capping Layer Oxidation

Selective Electroless Ni-Based Capping Layer on Cu Gate Electrode of TFT-LCD

Improved Field-Effect Mobility of In–Ga–Zn–O TFTs by Oxidized Metal Layer

Performance Enhancement Of Carbon Nanotube Thin Film Transistor By Yttrium Oxide Capping

High mobility and hysteresis free InGaSnO thin film transistors by co-sputtering via low temperature post annealing process

Amorphous Nickel Incorporated Tin Oxide Thin Film Transistors

InZnTiON Channel Layer for Highly Stable Thin-Film Transistors and Light-Emitting Transistors

Effects of Ni Doping Composition on the Physical and Electrical Properties of Cu 1- X Ni X O Thin-Film Transistors

Enhanced Stability of Thin Film Transistors with Double-Stacked Amorphous IWO/IWO:N Channel Layer

High‐Performance Thin‐Film Transistors with Nickel‐Doped Indium Zinc Oxide Channel Layers

Electrical Performance and Stability Improvements of High-Mobility Indium–Gallium–Tin Oxide Thin-Film Transistors Using an Oxidized Aluminum Capping Layer of Optimal Thickness

Enhancing the Stability and Mobility of TFTs via Indium-Tungsten Oxide and Zinc Oxide Engineered Heterojunction Channels Annealed in Oxygen Ambient

Huge mobility enhancement of InSnZnO thin-film transistors via Al-induced microstructure regularization

Improved Environmental Stability of InSnO Thin-Film Transistor by Interface Engineering

P‐11: Carrier Concentration Reduction by Fluorine Doping in P‐Type SnO Thin‐Film Transistors