Abstract:Abstract Aluminum can enhance heat release of energetic composite in theory. However, the commonly used micron aluminum powder has several short comings like incomplete reaction and low reaction rate. Meanwhile, outer oxide shell of nano Al particle is thicker than micro Al, which leads to low active aluminum content and insufficient heat release. On the basis of previous research, reported fluoropolymers modified Al particles were compared and suitable F2311was chosen. Sub-micron scale Al (median particle size around 200 nm) was regarded as optimum coated object in consideration of activity content of aluminum powder changing with particle size. The super fine Al powder was prepared by electrical explosion method, and encapsulated in situ by selected fluorine rubber F2311. The experiments on thermal stability demonstrated F2311 coating thickness should be no less than 3.6 nm. These results were further confirmed by EXPLO5 thermo dynamic calculation. Calculated results showed that reaction characters of F2311 encapsulated Al exceeded conventional nano Al regardless of combustion and explosion. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), laser particle size analyzer and X-ray photoelectron spectroscopy (XPS) were used to characterize coated products’ morphology, particle size distribution and interfacial bonding information. The results showed that the coated samples were generally spherical shape, with median particle size of 217.7 nm and coating thickness of 3.6 nm. The coating shell contained a small amount of alumina and aluminum fluoride besides fluoropolymer. The non-isothermal dynamic equations of Al/F2311 and Al/Al 2 O 3 were deduced by TG/DSC simultaneous thermal analysis. Compared with conventional nano-Al, the apparent activation energy of Al/F2311 decreased by 45 kJ/mol and the first exothermic peak temperature was about 10 °C earlier. Moreover, heat release was nearly twice as conventional nano-Al. TG-DSC-MS coupled measurements certified that active Al was enveloped by ‘fluorine atmosphere’ while F2311 decomposed in range of 200–400 °C. Alumina was replaced with aluminum fluoride inside coating layer during 400–550 °C, which broadened the diffusion path and then accelerated the permeation of oxidizing gas. In addition, the exothermic of Al-F was obviously larger than Al-O. Consequently, the oxidation reaction was activated rapidly, especially in initial exothermic period. Fluoropolymer encapsulated sub-micron sized Al was a latent highly activity energetic fuel and a potential candidate for aluminum powder.

The oxidation reaction and sensitivity of aluminum nanopowders coated by hydroxyl-terminated polybutadiene

Nano-aluminum double coated with copper and HTPB by one pot method and its catalysis on AP

Synthesis, Analysis, and Characterization of Aluminum Nanoparticles Coated with 2,2,4-Trimethylpentane

The Oxidation Mechanism of Pure Aluminum Powder Particles

Oxidation Mechanism of Aluminum Nanopowders

Study on the oxidation mechanism of micron- and nano-sized aluminum powders influenced by alumina shell

Thermal enhancement of the oxidation layer of micron-sized aluminum powder and its anti-oxidation performance

Atomistic insight into dehydrogenation and oxidation of aluminum hydride nanoparticles (AHNPs) in reaction with gaseous oxides at high temperature

Aluminum particles with nano-size defects in their alumina shells and their thermal oxidation properties

Polydopamine Coated on Aluminum Powders and Its Disperse Stability in HTPB

Anti-sintering behavior and combustion process of aluminum nano particles coated with PTFE: A molecular dynamics study

Preparation of mono-dispersed, high energy release, core/shell structure Al nanopowders and their application in HTPB propellant as combustion enhancers

Preparation and Enhanced Oxidation Performance of a Hf-doped Single-Phase Pt-modified Aluminide Coating

Synergistic Effect of Pt and Hf on the Early-Stage Oxidation Behaviour of NiAl Coating at 1000°C

High-temperature oxidation behavior of Ti2AlNb alloy with PEO/hBN composite coating at 1000 °C

Preparation, thermal stability and sintering behavior of Ni/Al2O3 coated powders

Controlling the Energy Release Behavior of Aluminum Nanoparticles As Metal Fuels by Atomic Layer Deposited Copper Oxide Nanocoatings

A latent highly activity energetic fuel: thermal stability and interfacial reaction kinetics of selected fluoropolymer encapsulated sub-micron sized Al particles

Microstructure Analysis of Initial Alumina of Pt-Modified Aluminide Coatings on Ni-Based Alloy

Tuning the Reactivity of Perfluoropolyether-Functionalized Aluminum Nanoparticles by the Reaction Interface Fuel-Oxidizer Ratio

Experimental Study on the Alumina Shell Protrusions of Aluminum Nanoparticles during the Aerobic Heating Environment