Abstract:This study aims to enhance the surface toughness and overall performance of arc-shaped nail teeth, which are vital components of presowing film-recovery machinery. Laser cladding technology was employed to deposit Ni60A/Cr3C2 composite coatings with the rare-earth oxide Y2O3 onto 60Si2Mn steel surfaces. The effects of different amounts of Y2O3 on the wear resistance of Ni60A/Cr3C2 composite coatings were evaluated. Scanning electron microscopy (SEM), X-ray diffraction, X-ray photoelectron spectroscopy, and 3D morphological analysis were used to investigate the microstructure, microhardness, elemental distribution, and tribological properties of the coatings. The ideal amount of Y2O3 to add to the mixtures to enhance the wear resistance was determined. The results showed that the coating containing 1.5% Y2O3 and Ni60A/Cr3C2 composite powder exhibited superior overall performance. Coatings with different amounts of added Y2O3 exhibited similar phase compositions, mainly consisting of γ-Ni-based, Ni2Si, M7C3 (M = Cr, Mn), and M23C6-strengthened phases. SEM analysis revealed that the coating with 1.5% Y2O3 exhibited excellent metallurgical bonding with the substrate. In addition, the coating exhibited finer grains, increased density, a more uniform distribution of coating elements, and a microhardness of 990 HV. Fewer grooves and smoother abrasions were observed after the wear test. The wear amount and depth were 14 × 10−4 g and 8.97 μm, which were 22.2% and 55.4% lower than the coating without added Y2O3, respectively. The tribological behavior indicated that adding the appropriate amount of Y2O3 facilitated the grain boundary consolidation while enhancing the adhesive properties of the oxide film, thereby increasing the wear resistance of the coating.

Coating of Y2O3 additive on Al2O3 powder and its effect on the wetting behaviour in the system Al2O3p/Al

Surface Energy Study Of Alooh Coated Calcium Carbonate By Inverse Gas Chromatography

Mechanical behavior of Y 2 O 3 -coated Al 2 O 3p /6061 Al composites

Effect of Surface Modification of Sub-Micron Al2O3 Particles by Rare-Earth on Interfacial Wettability of Al Matrix Composites

Surface modification and characterization of A12O3 micropowder

Rare-Earth Oxide Coating for Sub-Micro Particulates Reinforced Aluminum Matrix Composites

Effect of surface modification of Al2O3 powder with Y2O3 on microstructure and tensile properties of aluninium matrix composites

Effect of coating Al2O3 reinforcing particles on the interface and mechanical properties of 6061 alloy aluminium matrix composites

Effect of Several Inorganic Additives on Microstructure and Properties of Microarc Oxidation Coating on Aluminium Alloy

Codeposition of Al-Al_2O_3 Composite from AlCl_3-EMIC Room Temperature Ionic Liquid

Effects of the Deposition Mode and Heat Treatment on the Microstructure and Wettability of Y2O3 Coatings Prepared by Reactive Magnetron Sputtering

Study of microstructure, electronic structure and thermal properties of Al2O3-doped tetragonal YSZ coatings

Effect of Y2O3 on the Properties of Plasma Arc Coating on the Surface of Steel

Microstructure and properties of Al2O3-ZrO2-Y2O3 coatings during high temperature and thermal shock resistance

Tribological Behavior of Cathode Plasma Electrolytic Deposited Al2Y4O9 Coating on Aluminum Alloy

Effect of Y2O3 addition on the organization and tribological properties of Ni60A/Cr3C2 composite coatings obtained by laser-cladding

Dispersion Properties of Silicon Nitride Powder Coated with Yttrium and Aluminium Precursors

Preparation of Y₂O₃ Coated CaO Ceramic Cores with Anti-Hydration Performance and High-Interface Stability Against Interface Reaction of Ti-6Al-4V Alloys

Film-Coating Process of Hydrated Alumina on TiO<sub>2</sub>Particles

Structure and Properties of Thermal Barrier Coating Prepared by Alumina Coated Zirconia Composite Powder

Formation Mechanism for Al2O3-based Ceramic Coatings on Aluminum Alloy Substrates