Chemical and physical transformations of carbon-based nanomaterials observed by liquid phase transmission electron microscopy

Lucas R. Parent,Maria Vratsanos,Biao Jin,James J. De Yoreo,Nathan C. Gianneschi

DOI: https://doi.org/10.1557/mrs.2020.224

IF: 5

2020-09-01

MRS Bulletin

Abstract:Abstract

materials science, multidisciplinary,physics, applied

What problem does this paper attempt to address?

High-Resolution Transmission Electron Microscopy Imaging Of Carbon Nanostructures

Kazu Suenaga,Yuta Sato,Zheng Liu,Masanori Koshino,Chuanhong Jin

2012-01-01

Abstract:Here we show how a high-resolution transmission electron microscopy can be applied to characterize the carbon nanostructures. Direct imaging of the hexagonal network of carbon nanotube enables us to determine the chiral index and to visualize the topological defects, such as pentagons and heptagons. Individual molecular imaging has also become possible, and atomic structure of fullerene molecules (C-60 and C-80) has been successfully identified at a single-molecular basis. Some recent progress for in situ observation of the carbon nanotube/fullerene growth and the defect dynamics is also presented.
Atomic resolution liquid-cell transmission electron microscopy investigations of the dynamics of nanoparticles in ultrathin liquids.

Guomin Zhu,Yingying Jiang,Wei Huang,Hui Zhang,Fang Lin,Chuanhong Jin

DOI: https://doi.org/10.1039/c3cc46667a

IF: 4.9

2013-01-01

Chemical Communications

Abstract:We proposed a highly reproducible method that enables atomic resolution transmission electron microscopy investigations of the dynamics of nanoparticles in liquids. An ultrathin liquid layer was established as a result of formation of bubbles that was initiated and tuned by beam radiation. The migration, aggregation and rotation of palladium nanoparticles were observed.
In-Situ HR-TEM Characterizations on Individual Carbon Nanotubes During Its Manipulation, Deformation and Growth

Chuanhong Jin,Kazu Suenaga,Sumio Iijima

DOI: https://doi.org/10.1017/s1431927609092691

IF: 4.0991

2009-01-01

Microscopy and Microanalysis

Abstract:Extended abstract of a paper presented at Microscopy and Microanalysis 2009 in Richmond, Virginia, USA, July 26 – July 30, 2009
Observations of Carbon Nanotube Field Emission Failure in the Transmission Electron Microscope

MS Wang,JY Wang,CH Jin,Q Chen,LM Peng

DOI: https://doi.org/10.4028/www.scientific.net/msf.475-479.4071

2005-01-01

Materials Science Forum

Abstract:The failure of individual multiwall carbon nanotubes (CNTs) during electron field emission was investigated in situ inside the transmission electron microscope (TEM). Long time emission of a single CNT at the level of tens µA or higher may lead to unrecoverable damage to the CNT. High-resolution TEM observations of the emission failure process shown that the failure was usually companied by structure damage or break of the CNT, and the failure or degradation of the emission characteristics of the CNT was typically initiated at the CNT/substrate contact, defect site or at the open end via the field evaporation or oxidation of the tip of the CNT.
In Situ Electron Driven Carbon Nanopillar-Fullerene Transformation Through Cr Atom Mediation

Liang Zhao,Huy Q. Ta,Arezoo Dianat,Akash Soni,Artem Fediai,Wajian Yin,Thomas Gemming,Barbara Trzebicka,Gianaurelio Cuniberti,Zhongfan Liu,Alicja Bachmatiuk,Mark H. Rummeli

DOI: https://doi.org/10.1021/acs.nanolett.7b01406

IF: 10.8

2017-01-01

Nano Letters

Abstract:The promise of sp(2) nanomaterials remains immense, and ways to strategically combine and manipulate these nanostructures will further enhance their potential as well as advance nanotechnology as a whole. The scale of these structures requires precision at the atomic scale. In this sense electron microscopes are attractive as they offer both atomic imaging and a means to structurally modify structures. Here we show how Cr atoms can be used as physical linkers to connect carbon nanotubes and fullerenes to graphene. Crucially, while under electron irradiation, the Cr atoms can drive transformations such as catalytic healing of a hole in graphene with simultaneous transformation of a single wall carbon nanotube into a fullerene. The atomic resolution of the electron microscopy along with density functional theory based total energy calculations provide insight into the dynamic transformations of Cr atom linkers. The work augments the potential of transmission electron microscopes as nanolaboratories.
Liquid phase transmission electron microscopy for imaging of nanoscale processes in solution

Utkur Mirsaidov,Joseph P. Patterson,Haimei ZhengGuest,Haimei Zheng

DOI: https://doi.org/10.1557/mrs.2020.222

IF: 5

2020-09-01

MRS Bulletin

Abstract:Abstract

materials science, multidisciplinary,physics, applied
MATERIALS SCIENCE: High-Pressure Microscopy.

Zhongwu Wang,Yusheng Zhao

DOI: https://doi.org/10.1126/science.1127181

2006-01-01

Abstract:When bombarded with electrons, carbon nanotubes shrink, creating high internal pressures. The effect on molecules within the tubes can be studied at atomic resolution.
High-Pressure Microscopy

Zhongwu Wang,Yusheng Zhao

DOI: https://doi.org/10.1126/science.1127181

IF: 56.9

2006-01-01

Science

Abstract:When bombarded with electrons, carbon nanotubes shrink, creating high internal pressures. The effect on molecules within the tubes can be studied at atomic resolution.
Amorphization and Directional Crystallization of Metals Confined in Carbon Nanotubes Investigated by in Situ Transmission Electron Microscopy

Dai-Ming Tang,Cui-Lan Ren,Ruitao Lv,Wan-Jing Yu,Peng-Xiang Hou,Ming-Sheng Wang,Xianlong Wei,Zhi Xu,Naoyuki Kawamoto,Yoshio Bando,Masanori Mitome,Chang Liu,Hui-Ming Cheng,Dmitri Golberg

DOI: https://doi.org/10.1021/acs.nanolett.5b00664

IF: 10.8

2015-01-01

Nano Letters

Abstract:The hollow core of a carbon nanotube (CNT) provides a unique opportunity to explore the physics, chemistry, biology, and metallurgy of different materials confined in such nanospace. Here, we investigate the nonequilibrium metallurgical processes taking place inside CNTs by in situ transmission electron microscopy using CNTs as nanoscale resistively heated crucibles having encapsulated metal nanowires/crystals in their channels. Because of nanometer size of the system and intimate contact between the CNTs and confined metals, an efficient heat transfer and high cooling rates (∼10(13) K/s) were achieved as a result of a flash bias pulse followed by system natural quenching, leading to the formation of disordered amorphous-like structures in iron, cobalt, and gold. An intermediate state between crystalline and amorphous phases was discovered, revealing a memory effect of local short-to-medium range order during these phase transitions. Furthermore, subsequent directional crystallization of an amorphous iron nanowire formed by this method was realized under controlled Joule heating. High-density crystalline defects were generated during crystallization due to a confinement effect from the CNT and severe plastic deformation involved.
Electron Microscopy of Nanodevices: in Situ and Ex Situ Characterization of Structure and Transport Properties of Carbon Nanotubes

JM Zuo,T Kim,Q Chen,LM Peng,EA Olson

DOI: https://doi.org/10.1017/s1431927608082445

IF: 4.0991

2008-01-01

Microscopy and Microanalysis

Abstract:Extended abstract of a paper presented at Microscopy and Microanalysis 2008 in Albuquerque, New Mexico, USA, August 3 – August 7, 2008
Efficient nanoscale imaging of solid-state phase transitions by transmission electron microscopy demonstrated on vanadium dioxide nanoparticles

Michal Horák,Peter Kepič,Jiří Kabát,Martin Hájek,Filip Ligmajer,Andrea Konečná,Tomáš Šikola,Vlastimil Křápek

2024-08-22

Abstract:We present annular dark field scanning transmission electron microscopy (ADF-STEM) as an efficient, fast, and non-destructive nanoscale tool for monitoring solid-state phase transition. Using metal-insulator transition in vanadium dioxide nanoparticles as an example, we characterize lattice and electronic signatures of the phase transition using analytical transmission electron microscopy including diffraction and electron energy-loss spectroscopy. We demonstrate that ADF-STEM shows a clear contrast across the transition, interpreted with the help of convergent electron beam diffraction as stemming from the crystal-lattice modification accompanying the transition. In addition, ADF-STEM utilizes 3--6 orders of magnitude lower electron dose when compared to electron microscopy techniques able to reveal the phase transition with the same spatial resolution and universality. The benefits of ADF-STEM are emphasized by recording a full hysteresis loop for the metal-insulator transition of a single vanadium dioxide nanoparticle. Our study opens the prospect for fast, non-destructive, large-area and nanoscale characterization of solid-state phase transitions.

Materials Science
Direct Observation and Spectroscopy of Nanoscaled Carboxylated Carbonaceous Fragments Coated on Carbon Nanotubes.

Jun Zhong,Tian Xie,Jiujun Deng,Xuhui Sun,Xiulian Pan,Xinhe Bao,Ziyu Wu

DOI: https://doi.org/10.1039/c1cc11369k

IF: 4.9

2011-01-01

Chemical Communications

Abstract:The coating of nanoscaled carboxylated carbonaceous fragments on carbon nanotubes (CNTs) has been directly observed in chemical imaging with a concurrent identification of their electronic structure by scanning transmission X-ray microscopy. The coating also shields the detection of the CNT/nanoparticle interaction.
Transformations of Nanomaterials in the Environment

Stacey M. Louie,Rui Ma,Gregory V. Lowry

DOI: https://doi.org/10.1016/b978-0-08-099408-6.00002-5

2014-01-01

Abstract:Nanomaterials (NMs) will undergo a variety of transformations in the natural environment that can significantly change their transport behavior, ultimate fate, and toxicity. Chemical transformations include oxidation–reduction reactions, ligation, and dissolution (which are often associated with a redox reaction). Physical transformations include aggregation or disaggregation and adsorption of naturally occurring macromolecules. Biological interactions and biouptake of NMs can result in further physicochemical transformations. The current state of knowledge on the effects of these transformations on NM properties and hence their behavior, persistence, and risk in the environment is presented. The implications of these transformations for detection and characterization of NMs in biological and environmental matrices are also discussed. Finally, challenges for risk assessment of NMs due to their environmental transformations are identified.
Optical Visualization of Individual Ultralong Carbon Nanotubes by Chemical Vapour Deposition of Titanium Dioxide Nanoparticles

Rufan Zhang,Yingying Zhang,Qiang Zhang,Huanhuan Xie,Haidong Wang,Jingqi Nie,Qian Wen,Fei Wei

DOI: https://doi.org/10.1038/ncomms2736

IF: 16.6

2013-01-01

Nature Communications

Abstract:Direct visualization and manipulation of individual carbon nanotubes in ambient conditions is of great significance for their characterizations and applications. However, the observation of individual carbon nanotubes usually requires electron microscopes under high vacuum. Optical microscopes are much more convenient to be used, yet their resolution is low. Here we realize the visualization and manipulation of individual ultralong carbon nanotubes under optical microscopes by deposition of TiO2 nanoparticles on them. The strong scattering of TiO2 nanoparticles to visible light renders them visible by optical microscopes. Micro-Raman-spectroscopy measurement of individual carbon nanotubes is greatly facilitated by their optical visualization. With the assistance of TiO2 nanoparticles, individual carbon nanotubes can be easily manipulated under an optical microscope at macroscopic scale and in ambient conditions. Based on our approach, various manipulation of ultralong carbon nanotubes, including cutting, transfer, fabrication of structures/devices and pulling out inner shells of multiwalled carbon nanotubes, are demonstrated.
Carbon-nanotube-assisted transmission electron microscopy characterization of aerosol nanoparticles

S MAO,G LU,J CHEN

DOI: https://doi.org/10.1016/j.jaerosci.2008.10.001

IF: 4.586

2009-01-01

Journal of Aerosol Science

Abstract:Aerosol nanoparticles draw great attention due to their unique physico-chemical properties that can be harnessed for innovative applications as well as for their potential impact on public health and the environment. Microscopic characterization of these particles is critically important to understand the unique particle properties and their interaction with biological systems. Here we report on a simple and efficient method for size, morphology, and crystallinity analyses of aerosol nanoparticles through transmission electron microscopy (TEM). The method uses carbon nanotubes (CNTs) as the particle support on conventional TEM grids. The CNT support significantly improves the quality of high resolution TEM (HRTEM) imaging due to the unique properties of CNTs, the high probability of particles sitting at the edge of CNTs, and the minimization of the interference interaction between the electron beam and the supporting substrate. The improved HRTEM images are useful for detailed characterization of nanoparticles, and particularly suitable for analyzing core-shell nanoparticles.
In-Situ investigation on structure transformation of single-walled carbon nanotubes

Huanhuan Mei,Xuesong Mei,Xiaoqiao He,Zhiwu Bie,Jianlei Cui

DOI: https://doi.org/10.1016/j.apsusc.2023.159028

IF: 6.7

2023-12-02

Applied Surface Science

Abstract:The in-situ structure transformations by high-temperature energy beam in single-walled carbon nanotubes (SWCNTs) in real-time are investigated by experiment and molecular dynamics (MD) simulation. Experimental results showed that electron beam irradiation dramatically changed the size and structure of SWCNTs, leading defects, fracture, fusion, amorphization, evaporation and so on. The mechanism that causes these phenomena in experiments are explored and explained by using MD simulation. Thermodynamic and energy properties such as Lindeman index, potential energy plots and radial distribution function obtained by MD simulations revealed that 4200 K (±100 K) is the critical temperature for the damage or premetling of (6,6) SWCNTs, which are in solid–liquid coexistence stage between 4200 K and 4800 K. Once the temperature exceeded 4800 K, the SWCNTs will be dismembered and vaporized. This work is significant to establish a link between SWCNTs transformations and its temperature and provides a support for welding between SWCNTs and manufacturing SWCNT-based devices.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Exploiting Automatic Image Processing and In-situ Transmission Electron Microscopy to Understand the Stability of Supported Nanoparticles

James P. Horwath,Leena Vyas,Dmitri N. Zakharov,Rémi Mégret,Peter W. Voorhees,Eric A. Stach

DOI: https://doi.org/10.1017/s1431927622011588

IF: 4.0991

2022-07-23

Microscopy and Microanalysis

Abstract://static.cambridge.org/content/id/urn%3Acambridge.org%3Aid%3Aarticle%3AS1431927622011588/resource/name/firstPage-S1431927622011588a.jpg

materials science, multidisciplinary,microscopy
Nanorobotic manipulation of carbon nanotubes inside a transimission electron microscope

Lixin Dong,Bradley J. Nelson,Xinyong Tao,Li Zhang,Xiaobin Zhang,Dominic R. Frutiger,Arunkumar Subramanian

DOI: https://doi.org/10.3182/20060912-3-DE-2911.00023

2006-01-01

IFAC Proceedings Volumes

Abstract:Basic processes for nanorobotic manipulation of carbon nanotubes (CNTs) inside a transmission electron microscope are investigated experimentally. These processes are fundamental for the characterization of nanoscale materials, for the structuring of nanosized building blocks, and for the prototyping of nanoelectromechanical systems. Multi-walled CNTs, bamboo-structured CNTs, Cutipped CNTs, and quantum dots attached to CNTs have been used as test structures for manipulation.
Correlating the fluctuated growth of carbon nanotubes with catalyst evolution by atmospheric-pressure environmental transmission electron microscopy

Rui-Hong Xie,Lili Zhang,Ruixue Ma,Xin-Yu Jiao,Dai-Ming Tang,Chang Liu,Hui-Ming Cheng

DOI: https://doi.org/10.1007/s12274-023-6174-0

IF: 9.9

2023-10-29

Nano Research

Abstract:Rate-controlled growth of carbon nanotubes (CNTs) and catalyst design are considered efficient ways for the preparation of CNTs with specific structures and properties. However, due to the difficulties in capturing the growth process of the CNTs with tiny size under a complex growth environment, the growth kinetics of CNTs and their correlation with the catalyst seed have been seldom revealed. Here, we investigated the growth process of CNTs from Ni nanoparticles (NPs) in real-time under atmospheric pressure using transmission electron microscopy equipped with a closed gas cell. It was found that the growth rates of CNTs fluctuated, and a phase transition from Ni 3 C to Ni, and a reshaping of the catalyst NPs occurred during the growth process. We demonstrated that CNTs dynamically interacted with the connected catalyst NPs and the fluctuated growth rates of CNTs were correlated with the structure change of catalyst NPs. The origin of the growth rate fluctuation is attributed to the change of carbon concentration gradient in catalyst NPs.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Understanding Nanomaterial Synthesis with in Situ Transmission Electron Microscopy

Bethany M. Hudak,Yao-Jen Chang,Lei Yu,Guohua Li,Danielle N. Edwards,Matthew E. Park,Beth S. Guiton

DOI: https://doi.org/10.1017/s1431927615008314

IF: 4.0991

2015-01-01

Microscopy and Microanalysis

Abstract:Journal Article Understanding nanomaterial synthesis with in situ transmission electron microscopy Get access Bethany M Hudak, Bethany M Hudak Department of Chemistry, University of Kentucky, Lexington, KY 40506 Search for other works by this author on: Oxford Academic Google Scholar Yao-Jen Chang, Yao-Jen Chang Department of Chemistry, University of Kentucky, Lexington, KY 40506 Search for other works by this author on: Oxford Academic Google Scholar Lei Yu, Lei Yu Department of Chemistry, University of Kentucky, Lexington, KY 40506 Search for other works by this author on: Oxford Academic Google Scholar Guohua Li, Guohua Li Department of Electrical Engineering, Anhui University, Hefei, 230601, China Search for other works by this author on: Oxford Academic Google Scholar Danielle N Edwards, Danielle N Edwards Department of Chemistry, University of Kentucky, Lexington, KY 40506 Search for other works by this author on: Oxford Academic Google Scholar Matthew E Park, Matthew E Park Department of Chemistry, University of Kentucky, Lexington, KY 40506 Search for other works by this author on: Oxford Academic Google Scholar Beth S Guiton Beth S Guiton Department of Chemistry, University of Kentucky, Lexington, KY 40506Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831 Search for other works by this author on: Oxford Academic Google Scholar Microscopy and Microanalysis, Volume 21, Issue S3, 1 August 2015, Pages 1507–1508, https://doi.org/10.1017/S1431927615008314 Published: 23 September 2015

Chemical and physical transformations of carbon-based nanomaterials observed by liquid phase transmission electron microscopy

High-Resolution Transmission Electron Microscopy Imaging Of Carbon Nanostructures

Atomic resolution liquid-cell transmission electron microscopy investigations of the dynamics of nanoparticles in ultrathin liquids.

In-Situ HR-TEM Characterizations on Individual Carbon Nanotubes During Its Manipulation, Deformation and Growth

Observations of Carbon Nanotube Field Emission Failure in the Transmission Electron Microscope

In Situ Electron Driven Carbon Nanopillar-Fullerene Transformation Through Cr Atom Mediation

Liquid phase transmission electron microscopy for imaging of nanoscale processes in solution

MATERIALS SCIENCE: High-Pressure Microscopy.

High-Pressure Microscopy

Amorphization and Directional Crystallization of Metals Confined in Carbon Nanotubes Investigated by in Situ Transmission Electron Microscopy

Electron Microscopy of Nanodevices: in Situ and Ex Situ Characterization of Structure and Transport Properties of Carbon Nanotubes

Efficient nanoscale imaging of solid-state phase transitions by transmission electron microscopy demonstrated on vanadium dioxide nanoparticles

Direct Observation and Spectroscopy of Nanoscaled Carboxylated Carbonaceous Fragments Coated on Carbon Nanotubes.

Transformations of Nanomaterials in the Environment

Optical Visualization of Individual Ultralong Carbon Nanotubes by Chemical Vapour Deposition of Titanium Dioxide Nanoparticles

Carbon-nanotube-assisted transmission electron microscopy characterization of aerosol nanoparticles

In-Situ investigation on structure transformation of single-walled carbon nanotubes

Exploiting Automatic Image Processing and In-situ Transmission Electron Microscopy to Understand the Stability of Supported Nanoparticles

Nanorobotic manipulation of carbon nanotubes inside a transimission electron microscope

Correlating the fluctuated growth of carbon nanotubes with catalyst evolution by atmospheric-pressure environmental transmission electron microscopy

Understanding Nanomaterial Synthesis with in Situ Transmission Electron Microscopy