Abstract:USP <1207.1> Section 3.5 states that "A deterministic leak test method having the ability to detect leaks at the product's maximum allowable leakage limit is preferred when establishing the inherent integrity of a container-closure system." Ideally, container closure integrity of parenteral packaging would be evaluated by measuring a physical property that is sensitive to the presence of any package defect that breaches package integrity by increasing its leakage above its maximum allowable leakage limit. The primary goals of the work presented herein were to demonstrate the viability of the nondestructive, deterministic method known as laser-based gas headspace analysis for evaluating container closure integrity and to provide a physical model for predicting leak rates for a variety of container volumes, headspace conditions, and defect sizes. The results demonstrate that laser-based headspace analysis provides sensitive, accurate, and reproducible measurements of the gas ingress into glass vial-stopper package assemblies that are under either diffusive or effusive leak conditions. Two different types of positive controls were examined. First, laser-drilled micro-holes in thin metal disks that were crimped on top of 15R glass vials served as positive controls with a well-characterized defect geometry. For these, a strong correlation was observed between the measured ingress parameter and the size of the defect for both diffusive and effusive conditions. Second, laser-drilled holes in the wall of glass vials served as controls that more closely simulate real-world defects. Due to their complex defect geometries, their diffusive and effusive ingress parameters did not necessarily correlate; this is an important observation that has significant implications for standardizing the characterization of container defects. Regardless, laser-based headspace analysis could readily differentiate positive and negative controls for all leak conditions, and the results provide a guide for method development of container closure integrity tests.LAY ABSTRACT: The new USP 39 <1207>, "Package Integrity Evaluation-Sterile Products", states in section 3.4.1: "tracer gas tests performed using … laser-based gas headspace analysis [have] been shown to be sensitive enough to quantitatively analyze leakage through the smallest leak paths found to pose the smallest chance of liquid leakage or microbial ingress in rigid packaging." In addition, USP <1207> also states that "for such methods, the limit of detection can be mathematically predicted on the basis of gas flow kinetics." Using the above statements as a foundation, this paper presents a theoretical basis for predicting the gas ingress through well-defined defects in product vials sealed under a variety of headspace conditions. These calculated predictions were experimentally validated by comparing them to measurements of changes in the headspace oxygen content or total pressure for several different positive controls using laser-based headspace analysis. The results demonstrated that laser-based headspace analysis can, by readily differentiating between negative controls and positive controls with a range of defect sizes on the micron scale, be used to assess container closure integrity. The work also demontrated that caution must be used when attempting to correlate a leak rate to an idealized defect-size parameter.

Container Closure Integrity Test Using Frequency Modulation Spectroscopy Headspace Analysis with Carbon Dioxide as a Tracer Gas

Container Closure Integrity Test Method Development on Vials Stored at -80°C Using Headspace Carbon Dioxide Analysis

Method Development for Container Closure Integrity Evaluation via Headspace Gas Ingress by Using Frequency Modulation Spectroscopy

Container Closure Integrity Testing-Method Development for Freeze-Dried Products Using Laser-Based Headspace Oxygen Analysis

Dynamic Leakage Test of a Voluminous Container Using SF6 Gaseous Tracer

Comparing Container Closure Integrity Test Methods - Performance of Headspace Carbon Dioxide Analysis versus Helium Leakage Using Positive Controls

Comparison of Tunable Diode Laser Absorption Spectroscopy and Isothermal Micro-calorimetry for Non-invasive Detection of Microbial Growth in Media Fills

Preliminary Results for a New Final Package Test to Assess the Quality of Sterile Package Systems

Non-Destructive Testing Study of Hydrogen Storage COPVs Based on Digital Shearography Technique

The Development of a Novel Headspace O2 Concentration Measurement Sensor for Vials

Leakage dynamics of glass bottles on container closure integrity testing: Influence of different laser-drilled microhole geometries

Evaluation of Container Closure System Integrity for Storage of Frozen Drug Products: Impact of Capping Force and Transportation

High-voltage leak detection of a parenteral proteinaceous solution product packaged in form-fill-seal plastic laminate bags. Part 1. Method development and validation

Nondestructive In-situ Permittivity Measurement of Liquid Within a Bottle Using an Open-Ended Microwave Waveguide

Non-Invasive, Continuous, Quantitative Detection of Solvent Content in Vacuum Tray Drying

Development of more accurate methods for determining carbonation depth in cement-based materials

Evaluating Six Commercially Available Closed-System Drug-Transfer Devices Against NIOSH’s 2015 Draft Vapor Protocol

Measurement of Aerosol Transmission Through a Stress Corrosion Crack–Like Geometry

Time Temperature Superposition Evaluation and Modeling for Container Closure System's Seal Performance at Low Temperatures

Novel optical and electrical combined calcium corrosion test: An industrial application of the barrier permeability of spotless water vapor

Real-Time Monitoring of the Effect of CO2 on the Cement Sheath