Abstract:Abstract The thermal gravimetric analysis (TG) is a common method for the examination of the carbonation progress of cement-based materials. Unfortunately, the thermal properties of some components complicate the evaluation of TG results. Various hydrate phases, such as ettringite (AFt), C–S–H and AFm, decompose almost simultaneously in the temperature range up to 200 °C. Additionally, physically bound water is released in the same temperature range. In the temperature range between 450 °C and 600 °C, the decomposition of calcium hydroxide and amorphous or weakly bound carbonates takes place simultaneously. Carbonates, like calcite, from limestone powder or other additives may be already contained in the noncarbonated sample material. For this research, an attempt was made to minimise the influence of these effects. Therefore, differential curves from DTG results of noncarbonated areas and areas with various states of carbonation of the same sample material were calculated and evaluated. Concretes based on three different types of cement were produced and stored under accelerated carbonation conditions (1% CO 2 in air). The required sample material was obtained by cutting slices from various depths of previously CO 2 -treated specimen and subsequent grinding. During the sample preparation, a special attention was paid that no additional carbonation processes took place. As reference method for the determination of the carbonation depth, the sprayed application of phenolphthalein solution was carried out. Microscopic analysis was examined to confirm the assumptions made previously. Furthermore, the observed effect of encapsulation of calcium hydroxide by carbonates caused by the accelerated carbonation conditions was examined more closely.

Development of more accurate methods for determining carbonation depth in cement-based materials

Enhanced Carbonation Curing of Cement Pastes with Dolomite Additive

Quantification of carbonated Mg-based cement pastes by Raman spectroscopy

Carbonation Curing of Industrial Solid Waste‐based Aerated Concretes

Application of Infrared Spectroscopy in the Measurement of Carbonation Depth of Concrete

Microstructure Refinement of Calcium-Sulfate-aluminate and Portland Cement (CSA-PC) Hybrids with Accelerated CO2 Curing (ACC)

Quantitative evaluation of cement paste carbonation using Raman spectroscopy

Sustainable Building Material from CO2 Mineralization Slag: Aggregate for Concretes and Effect of CO2 Curing

Comparison of detection methods for carbonation depth of concrete

Carbonation Process Simulation for Cement-Based Materials Based on Microstructure by a Cement Hydration Model

Multi technique characterization of the carbonation affected zone including non-destructive single sided 1 H NMR

XRD and 29Si MAS NMR study on carbonated cement paste under accelerated carbonation using different concentration of CO2

Description of the concrete carbonation process with adjusted depth-resolved thermogravimetric analysis

Mechanism Analysis on Carbonation of Hardened Cement Paste with XCT

Real-Time Monitoring of Cement Paste Carbonation with In Situ Optical Fiber Sensors

Effect of Internal Moisture and Outer Relative Humidity on Concrete Carbonation

Instant CO2 curing for dry-mix pressed cement pastes: Consideration of CO2 concentrations coupled with further water curing

Quantitative Analysis of Carbonation Degree of Mortar Based on Multiple Interactive Influences

Experimental Investigation and Modelling of Carbonation Process in Cement Materials

Optical pH imaging reveals what phenolphthalein conceals – A carbonation study on blended cements

Time-Space-Resolved Chemical Deconvolution of Cementitious Colloidal Systems Using Raman Spectroscopy