Determination of calcium and magnesium by atomic absorption spectroscopy and flame photometry

R A Bisergaeva,Y N Sirieva

DOI: https://doi.org/10.1088/1742-6596/1691/1/012055

2020-11-01

Journal of Physics: Conference Series

Abstract:Abstract The comparison of emission intensities of unknown samples to either that of standard solutions, the alkali and alkaline earth metals. Flame photometer has both quantitative and qualitative applications. Flame photometer with monochromators emits radiations of characteristic wavelengths which help to detect the presence of a particular metal in the sample. This help to determine the availability of alkali and alkaline earth metals. Simple direct analysis procedure calcium, magnesium, in test solution flow injection analysis using flame atomic absorption spectroscopy or flame photometry designed using a well-mixed dilution chamber to increase calibration range. Analysis results real samples correspond to those found in the flame batch atomic procedure. Using the dilution chamber allows possibility of calibration using a dilution profile a single concentrate standard for each element and an empirical dilution equation that can be used to all elements are defined in each sample.

What problem does this paper attempt to address?

This paper aims to solve the problem of accurate determination of calcium (Ca) and magnesium (Mg). Specifically, the author determines the concentrations of these elements by atomic absorption spectroscopy (AAS) and flame photometry (FP). These two methods are of great significance for detecting the calcium and magnesium contents in water bodies, soils and biological samples in fields such as environmental science, agriculture and medicine.

### Specific problems solved by the paper include:
1. **Comparing the applicability of different methods**: The paper compares the efficiency and accuracy of the two techniques, AAS and FP, in determining calcium and magnesium, in order to determine which method is more suitable for specific application scenarios.
2. **Improving measurement accuracy**: By using standard solutions for calibration and adopting a mixing - dilution chamber to expand the calibration range, the accuracy and reliability of measurement are improved.
3. **Automating the analysis process**: The application of automated flow injection analysis (FIA) in AAS and FP is explored to reduce the consumption of samples and reagents, minimize sample - handling steps and improve analysis efficiency.
4. **Analyzing actual samples**: The effectiveness of the proposed method is verified by analyzing real samples and compared with the traditional batch flame atomic absorption spectroscopy.

### Method overview:
- **Preparation of standard solutions**: Prepare standard solutions of calcium and magnesium with different concentrations for calibrating the instrument.
- **Instrument setup**: Adjust the instrument parameters to ensure that the maximum absorbance reading is close to 100 to obtain the best sensitivity.
- **Sample analysis**: Use AAS to determine the concentration of magnesium, use FP to determine the concentration of calcium, and further confirm the results by ICP - AES (Inductively Coupled Plasma Atomic Emission Spectroscopy).
- **Data recording and analysis**: Record the absorbance readings of standard solutions with different concentrations and draw a standard curve for the determination of the concentration of unknown samples.

Through the above methods, the paper not only provides technical means for the determination of calcium and magnesium, but also provides a reliable analysis method for researchers in related fields.