Abstract:A highlight this year was the construction of elemental maps of microalgae cells at the organelle level using XRF-CT with a beam size of just 15 nm. These probably represent the highest ever spatial resolution achieved for XRF-CT images. An innovative approach for reconstruction algorithms used a deep convolutional neural network to correct for the self-absorption effects in the XRF-CT sinogram domain. Such corrections will enable the use of conventional tomographic reconstruction algorithms for XRF-CT analysis. A remarkable advantage of the proposed method was that it could correct for self-absorption effects without any prior knowledge of the scanning setups. A particularly innovative dual-energy X-ray-beam ptycho-fluorescence imaging method combined XRF spectrometry and X-ray ptychography scanning with simultaneous data-collection. To overcome the incompatibility of the different excitation and scanning conditions required for fast ptychography and high spatial resolution XRF spectrometry, two coaxial beams of different sizes were used on the sample simultaneously. In comparison to sequential scans, this combined approach has the potential to reduce the data collection time by a factor of 25. The very good performance of laboratory 2D-XRF spectrometry for the analysis of minute amounts of radioactive material has made it a potential alternative to TXRF spectrometry. Reconstruction algorithms are now capable of significantly enhancing imaging resolution in μXRF spectrometry. The forensic classification of incredibly small amounts of samples such as single fibres was accomplished using elemental profiles determined by TXRF spectrometry. Although characterisation of the low-Z matrix in milk and polymers by conventional TXRF spectrometry is challenging, it was successfully achieved by studying the Compton and Rayleigh scatter with both univariate and multivariate approaches. Portable XRF spectrometry is a well-established technique for a wide range of applications. Emphasis continues to be placed on improving calibration and reducing matrix and inter-element effects. The sample type remains a challenge for portable XRF analysis. Computer vision and statistical methods such as spectral angle mapper are being increasingly applied to maximise the information that can be extracted from the data. For example, an innovative approach exploited the elemental features from XRF spectra to improve the interpretation of molecular information provided by reflectance spectroscopy, and vice versa .

Improved Accuracy of Multicomponent Samples Analysis by X-Ray Fluorescence Using Relative Intensities and Scattered Radiation: A Review

Atomic spectrometry update: review of advances in X-ray fluorescence spectrometry and its special applications

X‐Ray Fluorescence Determination of the Chemical Composition and Coating Thickness of Artifact Surfaces Using the Intensity Ratio of α‐ and β‐Lines

Validation of secondary fluorescence excitation in quantitative X-ray fluorescence analysis of thin alloy films

Improvement of Exotic Material Verification Using XRF

Recent developments on XRF spectra evaluation

Possible Pitfalls in the Analysis of Minerals and Loose Materials by Portable XRF, and How to Overcome Them

Comparison of Quantitative X-ray Diffraction Mineral Analysis Methods

Suitability of XRF for Routine Analysis of Multi-Elemental Composition: A Multi-Standard Verification

Experimental methods in chemical engineering: X‐ray fluorescence—XRF

Total Reflection X-ray Fluorescence Spectrometry: A Comprehensive Review of Critical Components, Analytical Benefits and Practical Applications

Angle-Dependent XRF Analyses: Pros and Cons of a Novel Technique in the Field of Cultural Heritage

Evaluation of X-ray fluorescence for analysing critical elements in three electronic waste matrices: A comprehensive comparison of analytical techniques

When one equals two: Chemometrics turns Mössbauer spectrometer into X-ray fluorescence one

Research status of energy dispersive X-ray fluorescence spectrometer

X-ray fluorescence spectroscopy (XRF) for metallome analysis of herbarium specimens

Chemical element mapping by x-ray ghost fluorescence

Comparing portable x‐ray fluorescence spectroscopy instrumentation for metallome analysis of herbarium specimens

Data from Multiple Portable XRF Units and Their Significance for Ancient Glass Studies

Rapid Screening of Heavy Metals and Trace Elements in Environmental Samples Using Portable X-Ray Fluorescence Spectrometer, A Comparative Study

Elemental analysis using portable X-ray fluorescence: Guidelines for the study of dry human bone