Abstract:Background Mercury (Hg) is a persistent pollutant occurring in the environment able to transition between different species. It can therefore be found in air, soil and water reservoirs becoming a present concern for the general population but also sensitive populations like pregnant women. Therefore, investigating organ-specific transfer mechanisms of Hg is mandatory for Hg toxicity testing. For this, an in vitro system using microporous inserts to monitor the transfer across an in vitro placental barrier has been used. However, due to the cytotoxicity of Hg only low concentrations (1.26 ×10 -4 – 1.36 ×10 -2 μg/μL Hg) can be applied making Hg determination in cell culture medium using inductively coupled plasma-optical emission spectrometry challenging. Especially when these trace amounts should be determined alongside other trace elements which are naturally occurring in cells and cell culture medium like the essential metals manganese (Mn), iron (Fe), copper (Cu), and zinc (Zn). Additionally, Hg analysis on an ICP system holds also a number of challenges like a persistent memory effect and instability of Hg standard solutions. Methods The development of a rapid and sensitive ICP-OES method to determine Hg in different matrices like cell culture medium and cells has been performed on an Avio 220 Max ICP-OES (Perkin-Elmer) equipped with a cyclonic spray chamber and MicroMist® nebulizer. Cell lysates and cell culture medium were diluted in a mixture of 0.2% L-cysteine, 2% HNO 3 and 0.1% HCl and directly introduced into the ICP-OES system. Further method development included the suitability of the analysis of multiple elements like Mn, Fe, Cu, and Zn as well as the determination of the limit of detection and limit of quantification. Results The combination of 0.2% L-cysteine, 2% HNO 3 and 0.1% HCl is able to bind and stabilize Hg ions in standard solutions and in biological matrices over a wide dynamic concentration range (1 – 500 μg/L) also alongside other metals like Mn, Fe, Cu and Zn without losses of sensitivity. A short run time of 3 min enables high throughput analysis. Additionally, the high salt and carbon concentrations in the culture medium do not affect Hg sensitivity using the ICP-OES. Conclusion This method is a useful tool for the quantification of Hg in a variety of complex matrices including cells and cell culture media (high salt and carbon-rich (~1% each)) with high sensitivity and minimal sample preparation allowing high throughput. Furthermore, not only Hg can be determined in biological matrices, but even multiple elemental analysis can be carried out to address the effect of Hg on other metals homeostasis.

A simple ashing method for determination of Mg and Ca in laboratory animal feed and tissues.

Simultaneous Determination of 20 Heavy Metals and Trace Elements in Sargassum Pallidum and Sargassum Fusiforme and Its Adulterants by Microwave Digestion-ICP-MS

Comparison of Pretreatment Condition of Cadmium in Fish Sample and Diet by Microwave Digestion Method for ICP-AES

The electron microprobe analysis of sprayed microdroplets of solubilized biological tissues: a useful preliminary to localization studies

Simultaneous determination of Fe, P, Ca, Mg, Zn, and Cu in whole blood by two-jet plasma atomic emission spectrometry

Inductively Coupled Plasma Collision Cell Quadrupole Mass Spectrometric Determination of Extractible Arsenic, Cadmium, Chromium, Lead, Mercury, and Other Elements in Food Using Microwave-Assisted Digestion: Results from an FDA Interlaboratory Study

Determination of Metallic Element in Soybean Coat by Fermentation-Microwave Digestion-Microwave after Semi-Ashing Plasma Torch Atomic Emission Spectrometry

A Simplified Digestion Protocol for the Analysis of Hg in Fish by Cold Vapor Atomic Absorption Spectroscopy

Determination of calcium and magnesium by atomic absorption spectroscopy and flame photometry

Rapid Determination of Calcium, Iron, and Zinc in Gluconate Oral Solutions by Solution Cathode Glow Discharge – Atomic Emission Spectroscopy (SCGD-AES)

Using L-cysteine to enhance calibration range and prevent a memory effect in mercury analysis of complex samples via ICP-OES

Determination of Arsenic in Beverages and Foods by Hydride Generation Atomic Absorption Spectroscopy

Comparative study of three digestion methods for elemental analysis in traditional medicine products using atomic absorption spectrometry

Comparative Analysis of Calcium Content in Milkfish by Varying of Wet and Dry Conditions Using AAS Instrumentation

Fast and Direct Determination of Catechol-3, 6-Bis(methyleiminodiacetic Acid) Prototype in Beagle Dog Plasma Using Liquid Chromatography Tandem Mass Spectrometry: A Simplified and High Throughput In-Vivo Method for the Metal Chelator.

Determination of Calcium in Meat Products by Automatic Titration with 1,2-Diaminocyclohexane-N,N,N',N'-tetraacetic Acid

Determination of Elemental Composition in Soft Biological Tissue Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry: Method Validation

Solvent microextraction-flame atomic absorption spectrometry (SME-FAAS) for determination of ultratrace amounts of cadmium in meat and fish samples

A reliable method to prepare milligram size environmental samples to quantify metal(loid)s by high-resolution graphite furnace atomic absorption spectrometry

Improved methodology for the microwave digestion of carbonate-rich environmental samples

Development and Validation of Candidate Reference Methods for Determination of Serum Magnesium Based on Flame Atomic Absorption Spectrometry