Abstract:<p>With increasing social concern towards industrial wastewater treatment, desulfurization wastewater evaporation technology is attracting attention in theoretical investigation and showing competitive capability in practical applications by virtue of its low cost and high efficiency. In engineering practice, the selection of nozzle model, evaporation chamber size and flue gas source need to be carefully determined, ideally with comprehensive understanding of the process mechanism. Important factors to be considered include wastewater evaporation characteristics such as evaporation time, distance, and so on, which are difficult to be obtained directly through physical experiments. Numerical simulation can be utilized conveniently for the extraction of such data and further post analysis. In this study, a salt containing droplet evaporation model is combined with a two-way interphase coupling method to investigate the spray evaporation process. Numerical results show that by increasing the injection velocity and the liquid film thickness, and reducing the flue gas velocity, droplets were observed to be more dispersed in the flue, which in turn enhance the evaporability. The velocity difference between the gas-liquid phases is correlated with the gas-phase turbulent kinetic energy. Non-uniform inlet velocity can increase the flow turbulence intensity. This leads to enhanced droplet evaporation performance on one hand, but increased probability of the droplets hitting the wall on the other hand. From this study, we have also observed that the droplet evaporativity increases with the temperature. Finally, an optimal set of parameters are selected from the simulation exercises to achieve an optimal evaporation outcome. These parameters are introduced in large engineering design to guide the selection of the nozzle model and determine the evaporation chamber size.</p>

Experiments and simulation of varying parameters in cryogenic flue gas desulfurization process based on Aspen plus

A Semi-Wet Technological Process for Flue Gas Desulfurization by Corona Discharges at an Industrial Scale

Simulation of Wet FGD Based on ASPEN PLUS

Study on Parameter Optimization of Desulfurized Wet Flue Gas in Spray Condensation Process

Experimental Study of the Removal of Fine Particulate Matter and Moisture from Flue Gas

Modeling on circulating fluidized bed flue gas desulfurization

Analysis and Optimization of Chemical Processing Parameters for Wet Flue Gas Desulphurization System

Experimental Study of Semi-dry Flue Gas Desulfurization in Circulating Suspension Fluidized Bed

Promoting fine particle removal in double-tower cascade wet flue gas desulfurization system by flue gas temperature reduction

Process simulation on atomization and evaporation of desulfurization wastewater and its application

Study on Spray Condensation Performance of Desulfurization Wet Flue Gas

Experimental study on influence of multi-stage humidification on semi-dry flue gas desulfurization

D306 EXPERIMENTS AND MATHEMATICAL MODEL ON FLUE GAS DESULFURIZATION OF CIRCULATING FLUIDIZED BED

Experimental Study on Purification of Flue Gas Bio-desulfurization by Decompression Distillation

Experimental study on factors affecting the ammonia-based WFGD process

Experimental Study On Medium Temperature Dry Flue Gas Desulphurization By Using Active Sorbent In Circulating Fludized Bed

Numerical analysis of SO 2 removal characteristics in industrial flue gas desulfurization reactor by spray drying adsorption

Effect of operating parameters and reactor structure on moderate temperature dry desulfurization.

Experimental Study on Removal Characteristics of SO3 by Wet Flue Gas Desulfurization Absorber

Study on the Simulation of Source-Separated Combustible Solid Waste Fluidized Bed Gasification Based on Aspen Plus

Design and analysis of cryogenic CO2 separation from a CO2‐rich mixture