Abstract:<p>With increasing social concern towards industrial wastewater treatment, desulfurization wastewater evaporation technology is attracting attention in theoretical investigation and showing competitive capability in practical applications by virtue of its low cost and high efficiency. In engineering practice, the selection of nozzle model, evaporation chamber size and flue gas source need to be carefully determined, ideally with comprehensive understanding of the process mechanism. Important factors to be considered include wastewater evaporation characteristics such as evaporation time, distance, and so on, which are difficult to be obtained directly through physical experiments. Numerical simulation can be utilized conveniently for the extraction of such data and further post analysis. In this study, a salt containing droplet evaporation model is combined with a two-way interphase coupling method to investigate the spray evaporation process. Numerical results show that by increasing the injection velocity and the liquid film thickness, and reducing the flue gas velocity, droplets were observed to be more dispersed in the flue, which in turn enhance the evaporability. The velocity difference between the gas-liquid phases is correlated with the gas-phase turbulent kinetic energy. Non-uniform inlet velocity can increase the flow turbulence intensity. This leads to enhanced droplet evaporation performance on one hand, but increased probability of the droplets hitting the wall on the other hand. From this study, we have also observed that the droplet evaporativity increases with the temperature. Finally, an optimal set of parameters are selected from the simulation exercises to achieve an optimal evaporation outcome. These parameters are introduced in large engineering design to guide the selection of the nozzle model and determine the evaporation chamber size.</p>

Process simulation on atomization and evaporation of desulfurization wastewater and its application

Simulation of desulphurization wastewater evaporation through flue gas

Simulation Study on Centrifugal Spray Evaporation Characteristics and Process Optimization of Desulfurization Wastewater

Experimental research on spray characteristics of nozzle and numerical simulation of desulfurization wastewater evaporation

Evaporation Characteristics of a Single Desulfurization Wastewater Droplet in High-temperature Gas

Numerical Investigation on the Evaporation Performance of Desulfurization Wastewater in a Spray Drying Tower without Deflectors

Simulation on Evaporation and Motion of Atomized Droplets in Spray Dry Flue Gas Desulfurization Tower

Study on Spray Evaporation Treatment of Desulfurization Wastewater

Numerical Simulation Of Spray Evaporation Characteristics In Desulfuerization Reactor

Simulation on spray evaporation processes in Multi-spout bed by modified impinging wall method

Numerical Simulation of Wet Deacidification Process of Sludge Incineration Flue Gas

Research on atomization evaporation characteristics and parameter optimization of a novel spray evaporation desalting system

Study on Spray Condensation Performance of Desulfurization Wet Flue Gas

Study on the evaporation performance of concentrated desulfurization wastewater and its products analysis

Characteristics analysis and parameters optimization of desulfurization wastewater evaporation in a rotary spray drying tower

Experimental and numerical investigation on evaporation characteristics of high salinity wastewater by rotary spray

The Study of Evaporation Characteristics of the Desulfurization Wastewater (electrolyte Solution) Droplet

Drying of Wet Particles During Spray Evaporation of Desulfurization Wastewater

Study on Parameter Optimization of Desulfurized Wet Flue Gas in Spray Condensation Process

Numberical Simulation Study of Flue Gas Desulphurization by Spray Drying

An Experimental and Numerical Study on the Brine Droplet Evaporation Considering Salt Precipitation