Abstract:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Ahead of Print. Hydrogen-free diamond-like carbon (DLC) thin films can be employed for numerous applications, including engine components, once they exhibit good properties for that. They have been used as coatings due to their attractive properties, including high hardness, high wear resistance, and low CoF even under high load/pressure. One of the major limitations of hard hydrogen-free ta-C coatings applications is related to the low reactivity with oil additives used nowadays. The Ionic liquids (ILs) emerged as a novel class of lubricants that can be used in future lubricated systems due to possessing unique physical properties, like high thermal stability and conductivity. To improve the lubrication performance of DLC with ILs, the films were doped with rare earth metals such as Gd and Eu. These non-carbide-forming elements can be introduced in the DLC matrix, incorporated as single atoms, and improve the surface adsorption and reactivity of phosphorus-based IL, and consequently, the lubricating properties of DLC/ILs sliding contacts. However, many demanding applications require good performance across the different regimes (from boundary to hydrodynamic regime). Across all regimes, the boundary is the most challenging, where metal-to-metal contact occurs. Therefore, it is essential to study the influence of the doping elements on the doped-DLCs performance under the boundary regime. For comparison, a pure-DLC was used. In this study, Eu and Gd-DLC tribological systems are characterized by pin-on-disk test in dry conditions and by scratch test. Also, mechanical properties are studied through nano-indentation. Results show that samples doped with a low atomic concentration of Eu or Gd (1%–3%), despite having a CoF higher than un-doped DLC films, show typical values for pure-DLC coatings, like low specific wear rate (<10−16 m3/Nm) and high hardness (23 GPa), permitting, in the future, the combination of novel nanostructured alloyed-DLCs and ILs needed to achieve the optimal lubrication performance.

Parametric optimization of CVD process for DLC Thin film coatings: a comparative analysis

Tribological Properties of Diamond-Like Carbon Films Deposited by Vacuum Arc

Systematic Orthogonal Experiments Investigation for Diamond-like Carbon Deposition by ECR-CVD Method

Nitrogen-Stabilized DLC Coatings: Optimization of Properties and Deposition Parameters Using Randomized Tree and Neural Network Algorithms

Synthesis and characterization of diamond-like carbon coatings for drill bits using plasma-enhanced chemical vapor deposition

Excellent Adhered Thick Diamond-Like Carbon Coatings by Optimizing Hetero-Interfaces with Sequential Highly Energetic Cr and C Ion Treatment

Wear parameter optimization for CrN/TiAlSiN coating using novel BWM integrated TODIM decision-making approach

Experimental investigations and optimization of process variables of electro discharge coating process for Al-7075 alloy: a hybrid MCDM approach

Recent Progress on the Tribology of Pure/Doped Diamond-like Carbon Coatings and Ionic Liquids

Optimizing machining efficiency: a comprehensive study on PVD cathodic arc evaporation coated turning tool inserts with TiAlN/AlCrN multilayer coatings

Optimizing gas pressure for enhanced tribological properties of DLC-coated graphite

Plackett-Burman experimental design for pulsed-DC-plasma deposition of DLC coatings

A Review on Effects of Lubricant Formulations on Tribological Performance and Boundary Lubrication Mechanisms of Non-Doped DLC/DLC Contacts

Surface Roughness Influence on Tribological Behavior of HiPIMS DLC Coatings

Evaluating the Mechanical and Tribological Properties of DLC Nanocoated Aluminium 5051 Using RF Sputtering

Effect of Lubricant Formulations on the Tribological Performance of Self-Mated Doped DLC Contacts: a review

The effect of diamond like carbon coating on the wear resistance at dry sliding conditions

Comprehensive structural, nanomechanical and tribological evaluation of silver doped DLC thin film coating with chromium interlayer (Ag-DLC/Cr) for biomedical application

Parameters Optimization of Laser Processing CVD Diamond Film Based on FEM Simulation

Preparation and Characterization of Diamond-like Carbon Coatings for Biomedical Applications—A Review

Comparison of mechanical and tribological properties of diamond-like carbon coatings doped with Europium and Gadolinium produced by HiPIMS