Abstract:Using plasma-enhanced chemical vapor deposition (PECVD), a series of diamond-like carbon (DLC) films were prepared on YG8 carbide substrate by changing the enhancement mode and the negative bias voltage of the substrate. The structure and properties of the deposited films were tested by a series of analytical and testing instruments. During the deposition of DLC films, the ability of electrons to collide and ionize the gas is enhanced by increasing the number of electrons and extending the movement path of electrons, which is called electron-assisted enhanced gas ionization. Four different experimental modes (A mode, B mode, C mode, D mode) were set up. Different experimental modes have different degrees of electron-assisted enhancement ability of gas ionization, so different experimental modes are called different enhancement modes. The ions ionized by the electrons participate in the deposition of the film under the traction of the negative bias voltage of the substrate. The results show that: when depositing diamond-like carbon films, the energy of the ion beam is indirectly affected by electron collisions in different enhancement modes and directly affected by the negative bias voltage of the substrate. The higher the enhancement mode, the higher the ion beam energy. The higher the substrate negative bias voltage, the higher the ion beam energy generated by gas source discharge. Under the dual action of enhancement mode and substrate negative bias voltage, the total energy of ions involved in deposition should not be too high or too low, and the synergy of the two makes the properties and quality of the deposited film reach a better value. For industrial large-scale production of tool protection film for cutting aluminum alloy, it is more suitable for high enhancement mode and low negative bias voltage production. Through a series of process optimization to improve and enhance the comprehensive performance of DLC film, it is further applied to the actual processing application field, which has great industrial and social value to realize the large-scale application of DLC film in the field of hard to cut metal processing.

Synthesis and characterization of diamond-like carbon coatings for drill bits using plasma-enhanced chemical vapor deposition

Study of Diamond-Like Carbon coating application on carbide substrate for cutting tools used in the drilling process of an Al–Si alloy at high cutting speeds

Effect of arc-deposited diamond-like carbon (DLC) coating thickness on friction and size effects in high-speed micromilling of Ti6Al4V

Diamond-Like Carbon Thin Films Deposited On Ti6al4v Alloy Surface By Plasma Gun At Atmospheric Pressure

Properties of Diamond-like Tungsten-Doped Carbon Coatings Lubricated with Cutting Fluid

Mechanical and cutting performance of cemented carbide tools with Cr/x/DLC composite coatings

Diamond-like Carbon Film on 20 CrNiMo Steel Prepared by Hollow-Cathode Glow Discharge

Exploring long-run reciprocating Wear of diamond-like carbon coatings: microstructural, morphological and tribological evolution

Surface Roughness Influence on Tribological Behavior of HiPIMS DLC Coatings

Enhancement of micro milling performance by abrasion-resistant coated tools with optimized thin-film thickness: analytical and experimental characterization

Wear-resistance of Diamond-like Carbon Thin Films Deposited on the Metal Seal Ring Surface by Plasma Gun at an Atmospheric Pressure

Study of the Industrial Application of Diamond-Like Carbon Coatings Deposited on Advanced Tool Steels

Tribological Behaviors of Diamond-Like Carbon Coatings on Plasma Nitrided Steel Using Three BN-containing Lubricants

The effect of diamond like carbon coating on the wear resistance at dry sliding conditions

Optimizing gas pressure for enhanced tribological properties of DLC-coated graphite

A study of the wear mechanism of diamond-like carbon films

Improving Tribological Performance of Piston Ring Steel Substrates by DLC/Nano-crystalline Diamond Coating

Engineered CVD Diamond Coatings for Machining and Tribological Applications

Tribological study of lubricious DLC biocompatible coatings

Tribological Properties of Diamond-Like Carbon Films Deposited by Pulsed Laser Arc Deposition

Effects of deposited particle energy on the structure and properties of diamond-like carbon films