Abstract:Microcrystalline diamond (MCD), nanocrystalline diamond (NCD), boron doped microcrystalline diamond (BDMCD), and boron doped microcrystalline-nanocrystalline diamond (BDM-NCD) films were prepared by hot filament chemical vapor deposition (HFCVD) technique. Scanning electron microscopy (SEM), Raman spectroscopy and Rockwell indention testes were used to characterize the microstructure and properties of the coatings, and friction experiments were carried out to study the tribological properties of diamond films and GCr15 steel balls under different lubrication conditions. At the same time, the cutting performance of different diamond coated tools was studied by cutting 30% SiCp/Al composites. The results show that the residual compressive stress of the NCD film is the largest, which is −1.88 GPa. Due to the mitigation effect of the underlying BDMCD film, the BDM-NCD film has the smallest residual stress, which is −0.37 GPa. It can be seen from the friction test that the average coefficient of friction of NCD film is lower than that of MCD film due to the smooth surface. The average friction coefficient of BDM-NCD film is the lowest, which is 0.326. At the same time, the wear resistance of BDM-NCD film is the best, and the value is 0.53 × 10 −6 mm 3 /Nmm. From the wear morphology, it can be seen that the amount of metastatic material adhered to the wear surface of the diamond films is less under water lubrication than under dry friction condition. Compared with dry friction, the wear scar depth of BDM-NCD film under water lubrication is smaller, showing the better tribological properties. Cutting experiments show that BDM-NCD film has the best wear resistance and the best cutting performance.

Study of Diamond-Like Carbon coating application on carbide substrate for cutting tools used in the drilling process of an Al–Si alloy at high cutting speeds

Evaluation of the drilling process in 6061-T6 Al-Mg-Si alloys using AISI M-35 diamond-like carbon coated high-speed steel drill

Synthesis and characterization of diamond-like carbon coatings for drill bits using plasma-enhanced chemical vapor deposition

Mechanical and cutting performance of cemented carbide tools with Cr/x/DLC composite coatings

Study of the Industrial Application of Diamond-Like Carbon Coatings Deposited on Advanced Tool Steels

Si-containing diamond-like carbon coatings to improve the wear resistance of solid ceramic end mills

The Effect of DLC Surface Coatings on Microabrasive Wear of Ti-22Nb-6Zr Obtained by Powder Metallurgy

Evaluation of the performance of DLC Coatings (ta-C) of WC-Co tools while machining Al7075 alloy

Mechanical, Corrosion, and Tribological Properties of Coated Milling Inserts

Effect of arc-deposited diamond-like carbon (DLC) coating thickness on friction and size effects in high-speed micromilling of Ti6Al4V

Microstructure, Tribological and Cutting Performance of Ti-DLC/α-C:H Multilayer Film on Cemented Carbide

Study on the Orthogonal Cutting Process of Al7050T7451 with Uncoated and Coated Tools

Evaluating the Mechanical and Tribological Properties of DLC Nanocoated Aluminium 5051 Using RF Sputtering

Analysis of Wear Mechanisms Under Cutting Parameters: Influence of Double Layer TiAlN/TiN PVD and TiCN/Al2O3 Chemical Vapor Deposition-Coated Tools on Milling of AISI D2 Steel

Enhancement of micro milling performance by abrasion-resistant coated tools with optimized thin-film thickness: analytical and experimental characterization

Surface integrity of machined AISI D2 steel and its effect on the adhesion of a PVD-AlCrN coating

Surface Roughness Influence on Tribological Behavior of HiPIMS DLC Coatings

Exploring long-run reciprocating Wear of diamond-like carbon coatings: microstructural, morphological and tribological evolution

Preparation, Characterization and Tribological Properties of Diamond-Like Carbon Film on AZ31 Magnesium Alloy

Enhancing Tool Performance in High-Speed End Milling of Ti-6Al-4V Alloy: The Role of AlCrN PVD Coatings and Resistance to Chipping Wear

Study on tribology and cutting performance of boron doped diamond composite coated tool