Properties of Diamond-like Tungsten-Doped Carbon Coatings Lubricated with Cutting Fluid

Krystyna Radoń-Kobus,Monika Madej,Joanna Kowalczyk,Katarzyna Piotrowska
DOI: https://doi.org/10.3390/coatings14030342
IF: 3.236
2024-03-13
Coatings
Abstract:In this paper, the authors investigated the impact of DLC coatings doped with tungsten (a-C:H:W) coatings obtained using plasma-assisted physical vapor deposition (PVD) on the properties of the 100Cr6 steel. The results of the 100Cr6 steel specimens with and without the coating were compared. Scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) analysis were used to observe the morphology of the coating surfaces and cross-sections and identify the elements in the coating composition. The contact angle of the investigated surfaces was measured with a tensiometer. Additionally, the effect of the coatings on the tribological properties of lubricated friction pairs was evaluated. Friction tests were performed on a ball-on-disc tribometer under lubrication with cutting fluid. The surface texture of the samples before and after the tribological tests was measured using a confocal profilometer. The results obtained from the tests and analysis allow for the conclusion that the use of DLC coatings a-C:H:W increases the hardness of 100Cr6 steel by three times. The values of the contact angles were indicative of surface hydrophilic characteristics. The tungsten-doped diamond-like coating under friction conditions reduced the coefficient of friction and wear. DLC coatings a-C:H:W lubricated with the cutting fluid improve the mechanical and tribological properties of 100Cr6 steel sliding surfaces under friction.
materials science, multidisciplinary,physics, applied, coatings & films
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is to explore the performance of tungsten - doped diamond - like carbon coatings (a - C:H:W) under the lubrication condition of cutting fluid. Specifically, the author studied how these coatings affect the mechanical and tribological properties of 100Cr6 steel, including hardness, coefficient of friction, wear rate and surface wettability, etc. By comparing with uncoated 100Cr6 steel samples, the effect of tungsten - doped diamond - like carbon coatings in improving the wear resistance of materials and reducing friction was evaluated. The paper analyzed in detail the microstructure, thickness, hardness and tribological properties of the coatings through experimental methods, and carried out comprehensive tests using equipment such as scanning electron microscope (SEM), energy - dispersive X - ray spectrometer (EDX), contact angle measuring instrument, and friction and wear testing machine. The experimental results show that tungsten - doped diamond - like carbon coatings can significantly improve the hardness of 100Cr6 steel, reduce the coefficient of friction and wear rate, and at the same time improve the surface wettability of the material, thereby improving its mechanical and tribological properties under the lubrication condition.