Abstract:A new surface-potential-based analytical model for a source-pocket-doped cylindrical-gate tunnel field-effect transistor (FET) with a work-function-modulated metal gate is proposed herein. The inclusion of a highly doped source pocket layer improves the drain current by two decades because of the higher band-to-band tunneling probability of charge carriers in the vicinity of the tunneling junction. Also, the presence of the work-function-modulated cylindrical gate reduces the subthreshold swing (SS) further below 60 mV/decade and thus enhances the (I_{60}) performance. The potential distribution of the model is determined using the two-dimensional (2D) Poisson equation with appropriate boundary conditions and plays a significant role in the calculation of the shortest tunneling distance and the drain current. The position and width of the pocket layer in the source region are optimized with the aim of achieving the maximum current switching ratio (ION/IOFF) and (I_{60}) and least possible subthreshold swing. Due to its high current switching ratio, significantly improved (I_{60}), and remarkably low SS characteristics, the proposed model represents one of the probable devices to replace complementary metal–oxide–semiconductor (CMOS) technology. The results of the analytical model are validated against those obtained using the Synopsys technology computer-aided design (TCAD) device simulator.

Analysis and Simulation of Schottky Tunneling Using Schottky Barrier FET with 2-D Analytical Modeling

Two-dimensional analytical modeling of the surface potential and drain current of a double-gate vertical t-shaped tunnel field-effect transistor

An analytical model of the surface-potential-based source-pocket-doped cylindrical-gate tunnel FET with a work-function-modulated metal gate

Improved Analytical Model of Surface Potential with Modified Boundary Conditions for Double Gate Tunnel FETs.

A Fully Analytical Current Model for Tunnel Field-Effect Transistors Considering the Effects of Source Depletion and Channel Charges

A dual gate material tunnel field effect transistor model incorporating two‐dimensional Poisson and Schrodinger wave equations

An Analytical 2D Current Model of Double-Gate Schottky-Barrier MOSFETs

Potential Analysis of Double Gate Vertical TFET Using 2-D Modeling for Low Power Application

Analytical Model for High Current Density Trench Gate Mosfet

A Physical Current Model for Multi-Finger Gate Tunneling FET with Schottky Junction

Physics-Based Modeling and Validation of 2D Schottky Barrier Field-Effect Transistors

Fully Analytical Carrier-Based Charge and Capacitance Model for Hetero-Gate-Dielectric Tunneling Field-Effect Transistors

An Analytical Potential Model of Double-Gate MOSFETs with Schottky Source/Drain

Drain Current Model for Double Gate Tunnel-FETs with InAs/Si Heterojunction and Source-Pocket Architecture

A 2D Analytical Model for SCEs in MOSFETs with High-K Gate Dielectric

Drain Current Model for Double Gate Tunnel-FETs with InAs/Si Heterojunction and Source-Pocket Architecture.

Analytic model for subthreshold channel potential and threshold voltage of the Schottky-barrier surrounding-gate MOSFETS

A Fully Analytical Current Model for Gate–Source Overlap Tunneling FETs as the Ternary Devices

Monte Carlo simulation of Schottky contact with direct tunnelling model

A Charge-Based Capacitance Model for Double-Gate Tunnel FETs With Closed-Form Solution

An Analytical Charge Model for Double-Gate Tunnel FETs