Abstract:In order to study the durability of concrete materials subjected to sulfate attack, in a sulfate attack environment, a series of concrete tests considering different fly ash contents and erosion times were conducted. The mechanical properties and the micro-structure of concrete under sulfate attack were studied based on the following: uniaxial compressive strength test, split tensile test, ultrasonic impulse method, scanning electron microscopy (SEM) and X-ray diffraction (XRD). The mechanical properties were compressive strength, splitting tensile strength, and relative dynamic elastic modulus, respectively. Additionally, according to the damage mechanical theory, experimental results and micro-structure analysis, the damage evolution process of concrete under a sulfate attack environment were studied in detail. Finally, according to the sulfate attack time and fly ash content, a damage model of the sulfate attack of the binary surface was established. The specific results are as follows: under the action of sulfate attack, the change law of the rate of mass change, relative dynamic modulus of elasticity, corrosion resistance coefficient of compressive strength, and the corrosion resistance coefficient of the splitting tensile strength of concrete all increase first and then decrease. Under the same erosion time, concrete mixed with 10% fly ash content has the best sulfate resistance. Through data regression, the damage evolution equation of the sulfate attack was developed and there is an exponential function relationship among the different damage variables. The binary curved surface regression effect of the concrete damage and the erosion time and the amount of fly ash is significant, which can predict deterioration of concrete damage under sulfate attack. During the erosion time, the combined expansion of ettringite and gypsum caused micro cracks. With an increase of corrosion time, micro cracks developed and their numbers increased.

Comprehensive resistance of fair-faced concrete suffering from sulfate attack under marine environments

Sulphate attack resistance of high-performance concrete under compressive loading

Mechanical Properties and Damage Evolution of Concrete Materials Considering Sulfate Attack

Study on the Resistance of Concrete to High-Concentration Sulfate Attack: A Case Study in Jinyan Bridge

Experimental study of the deterioration mechanism of concrete under sulfate attack in wet-dry cycles

Chloride penetration in concrete under marine atmospheric environment – analysis of the influencing factors

Mechanical Performance and Chloride Penetration of Calcium Sulfoaluminate Concrete in Marine Tidal Zone

Accelerating Tests For The Performance Deterioration Of Concrete Exposed To Chloride Media

Optimal Design and Performance of Concrete with Function Component in Marine Environment

Sulfate attack on concrete with mineral admixtures

Degradation Mechanisms of Chloride Contaminated Cast-in-Situ Concrete Partially Exposed to Magnesium-Sulfate Combined Environment

Effects of Cyclic Seawater Exposure on the Mechanical Performance and Chloride Penetration of Calcium Sulfoaluminate Concrete

Degradation Mechanism of Concrete Subjected to External Sulfate Attack: Comparison of Different Curing Conditions

Research on the Sulfate-resistant Chemical Attack Mechanism of Concrete with Mineral Admixture

Damage Mechanism of Concrete Deteriorated by Sulfate Attack in Wet-Dry Cycle Environment

Chloride transport resistance of alkali-activated concrete exposed to combined chloride, sulfate and carbonation environment

Reliability assessment of concrete under external sulfate attack

Mechanism and Performance Control Methods of Sulfate Attack on Concrete: A Review

Concrete Deterioration Mechanisms under Combined Sulfate Attack and Flexural Loading

Experimental study on underground structure concrete under static bending loads and sulfate attack

Overview of Concrete Durability under Sulfate Attack and Multi-Factor Coupling Effects