Abstract:This comprehensive study, being part of the European XFEL R\&D effort, elucidates the influence of medium temperature (mid-T) heat treatments between 250°C and 350°C on the performance of 1.3~GHz superconducting radiofrequency (SRF) niobium cavities. Utilizing a refurbished niobium retort furnace equipped with an inter-vacuum chamber and cryopumps at DESY, we have embarked on an investigation to enhance the state-of-the-art SRF cavity technology. Our research reveals that mid-T heat treatments significantly boost the quality factor ($Q_0$) of the cavities, achieving values between $2\cdot10^{10}$ to $5\cdot10^{10}$ at field strengths around 16~MV/m, while the maximum field strengths are limited to 25-35~MV/m and enhanced sensitivity to trapped magnetic flux is observed. Moreover, we delve into the effects of surface impurity concentration changes, particularly the diffusion of oxygen content, and its impact on performance enhancements. By categorizing treatments based on calculated diffusion lengths using the whole temperature profile, we recognize patterns that suggest an optimal diffusion length conducive to optimizing cavity performance. SIMS results from samples confirm the calculated oxygen diffusion lengths in most instances. Deviations are primarily attributed to grain boundaries in fine-grain materials, necessitating repeated measurements on single-crystal materials to further investigate this phenomenon. Investigations into cooling rates and the resulting spatial temperature gradients across the cavities ranging from 0.04 to 0.2~K/mm reveal no significant correlation with performance following a mid-T heat treatment. However, the increased sensitivity to trapped magnetic flux leads to new challenges in the quest for next-generation accelerator technologies since the requirement for magnetic hygiene gets stricter.

Improvement of the first flux entry field by laser post-treatment of the thin Nb film on Cu

Role of microstructure on flux expulsion of superconducting radio frequency cavities

Study on laser annealing of niobium films deposited on copper for RF superconducting cavities

On the quest of low temperature nitrogen infusion relevant for superconducting Nb based radio-frequency cavities

Analysis of post wet chemistry heat treatment effects on Nb SRF surface resistance

Significant improvement of the lower critical field in Y doped Nb: potential replacement of basic material for the radio-frequency superconducting cavity

Improvement and protection of niobium surface superconductivity by atomic layer deposition and heat treatment

Enhanced radio-frequency performance of niobium films on copper substrates deposited by high power impulse magnetron sputtering

Evaluation of flux expulsion and flux trapping sensitivity of srf cavities fabricated from cold work Nb sheet with successive heat treatment

Effect of Successive Heat Treatment on the Performance of Superconducting Radio Frequency Niobium Cavities

Nitrogen and argon doping of niobium for superconducting radio frequency cavities: a pathway to highly efficient accelerating structures

Evaluation of predictive correlation between flux expulsion and grain growth for superconducting radio frequency cavities

Systematic study of niobium thermal treatments for superconducting radio frequency cavities employing X-ray photoelectron spectroscopy

Correlation of srf performance to oxygen diffusion length of medium temperature heat treated cavities

Understanding the Mechanism of the Performance Improvement in Nitrogen-doped Niobium Superconducting Radio Frequency Cavity

Microstructural Refinement of Niobium for Superconducting RF Cavities

UHV ARC FOR SUPERCONDUCTING NIOBIUM FILM DEPOSITION

Low temperature laser scanning microscopy of a superconducting radio-frequency cavity

Improving the Stability of Pulse Superconducting Radio Frequency Cavities by the Construction of an Al-Nb Double Layer Structure

Laser Surface Remelting in Single-Crystal Nickel-based Superalloy using a Continuous Wave Fiber Laser

Thermal excitation-induced micro/nano fabrication and material modification of superconducting Nb films