Abstract:Point contact tunneling (PCT) spectroscopy measurements are reported over wide areas of cm-sized cut outs from niobium superconducting RF cavities. A comparison is made between a high-quality, conventionally processed (CP) cavity with a high field Q drop for acceleration field E $>$ 20 MV/m and a nitrogen doped (N-doped) cavity that exhibits an increasing Q up to fields approaching 15 MV/m. The CP cavity displays hot spot regions at high RF fields where Q-drop occurs as well as unaffected regions (cold spots). PCT data on cold spots reveals a near ideal BCS density of states (DOS) with gap parameters, $\Delta$ as high as 1.62 meV, that are among the highest values ever reported for Nb. Hot spot regions exhibit a wide distribution of gap values down to $\Delta \sim$ 1.0 meV and DOS broadening characterized by a relatively large value of pair-breaking rate, $\Gamma$, indicating surface regions of significantly reduced superconductivity. In addition, hot spots commonly exhibit Kondo tunneling peaks indicative of surface magnetic moments attributed to a defective oxide. N-doped cavities reveal a more homoegeneous gap distribution centered at $\Delta \sim$ 1.5 meV and relatively small values of $\Gamma/\Delta$. The absence of regions of significantly reduced superconductivity indicates that the N interstitials are playing an important role in preventing the formation of hydride phases and other macroscopic defects which might otherwise severely affect the local, surface superconductivity that lead to hot spot formation. The N-doped cavities also display a significantly improved surface oxide, i.e., increased thickness and tunnel barrier height, compared to CP cavities. These results help explain the improved performance of N-doped cavities and give insights into the origin of the initial increasing Q with RF amplitude.

Low temperature laser scanning microscopy of a superconducting radio-frequency cavity

Temperature Mapping on a Niobium-Coated Copper Superconducting Radio-Frequency Cavity

Spatially Resolved Characterization of the Microwave Properties of Superconducting Thin Films by Low Temperature Microwave Scanning Near-Field Microscopy

High resolution diagnostic tools for superconducting radio frequency cavities

Ultra-Low Surface Resistance via Vacuum Heat Treatment of Superconducting Radiofrequency Cavities

PROBING HOT SPOT AND COLD SPOT REGIONS OF SRF CAVITIES WITH TUNNELING AND RAMAN SPECTROSCOPIES

Temperature, RF Field, and Frequency Dependence Performance Evaluation of Superconducting Niobium Half-Wave Cavity

On the quest of low temperature nitrogen infusion relevant for superconducting Nb based radio-frequency cavities

Nonlinear Near-Field Microwave Microscope For RF Defect Localization in Superconductors

Microscopic examination of rf-cavity-quality niobium films through local nonlinear microwave response

Advancement in the understanding of the field and frequency dependent microwave surface resistance of niobium

Cold RF Test and Associated Mechanical Features Correlation of a TESLA-style 9-Cell Superconducting Niobium Cavity Built in China

Unprecedented Quality Factors at Accelerating Gradients up to 45 MV/m in Niobium Superconducting Resonators via Low Temperature Nitrogen Infusion

Muon spin rotation studies of niobium for superconducting rf applications

Insight into bulk niobium superconducting RF cavities performances by tunneling spectroscopy

Efficient expulsion of magnetic flux in superconducting RF cavities for high $Q_0$ applications

Multi-metallic conduction cooled superconducting radio-frequency cavity with high thermal stability

Effect of high temperature heat treatments on the quality factor of a large-grain superconducting radio-frequency niobium cavity

High-Q operation of SRF cavities: The potential impact of thermocurrents on the RF surface resistance

Continuous Wave Mode Test of Conduction-Cooled Nb3Sn Radio Frequency Superconducting Cavities at Peking University

The Anomalous Resonant Frequency Variation of Microwave Superconducting Niobium Cavities Near $T_c$