Evaluation of predictive correlation between flux expulsion and grain growth for superconducting radio frequency cavities

Zu Hawn Sung,Paulina Kulyavtsev,Martina Martinello,Dan Gonnella,Marc Ross,Sam Posen

DOI: https://doi.org/10.1088/1361-6668/ace4fb

2023-03-25

Abstract:A series of experiments were carried out in an effort to develop a simple method for predicting magnetic flux expulsion behavior of high purity niobium used to fabricate superconducting radio frequency (SRF) cavities. Using conventional metallographic characterizations in conjunction with high spatial resolution electron backscattered diffraction-orientation imaging microscopy (EBSD-OIM), we found that the flux expulsion behavior of 1.3 GHz single cell SRF Nb cavities is significantly associated with the grain growth of the Nb material during heat treatment. Most of Nb grains rapidly grew during 900C heat treatment, and likely full-recrystallized with 1000C HT. With comparison of the magnetic flux expulsion ratio (Bsc/Bnc) at dT = 5 K, the flux expulsion efficiency of the cavities increases along with increasing of grain size. Most interestingly, 900C HT shows a roughly linear trend that suggests this criterion could be used to predict appropriate heat treatment temperature for sufficient flux expulsion behavior in SRF-grade Nb. This result would be used to see if flux expulsion can be predicted by examining the materials coming from the Nb vendor, prior to cavity fabrication.

Accelerator Physics,Superconductivity

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to predict the performance of flux expulsion by studying the grain growth behavior of niobium (Nb), the material of superconducting radio - frequency cavities (SRF cavities), during the heat - treatment process. Specifically, the authors hope to find the correlation between the flux expulsion efficiency and grain growth, so that they can predict the flux expulsion effect of the material after it is made into a superconducting radio - frequency cavity only by the grain growth situation of the samples provided by the material supplier without actually making the cavity. This will help optimize the heat - treatment process parameters to ensure that the produced superconducting radio - frequency cavities have good flux expulsion performance, thereby improving their efficiency in particle accelerator applications.

The core hypothesis of the paper is that the defects that cause the flux to be trapped during the cooling process are the same as those that control the grain growth. If this hypothesis holds, then the flux expulsion performance can be predicted by measuring the grain growth of the material at different temperatures. The advantage of this method is that it provides a simple and cost - effective method to evaluate the performance of the material before the manufacture of superconducting radio - frequency cavities, thus avoiding the traditional, time - consuming and costly single - cell cavity testing method.