Abstract:Compared to conventional monoethanolamine (MEA), alternative solvents are expected to substantially contribute to reduce the energy demand of post-combustion CO 2 capture from flue gases. This study presents a comprehensive techno-economic analysis of a 27 wt% 2-amino-2-methyl-1-propanol (AMP) + 13 wt% piperazine (PZ) aqueous solution for CO 2 capture, compared to a 30 wt% MEA solution. The study addresses the retrofit of a carbon capture unit to a biomass-fired combined heat and power (CHP) plant, effectively making it a bioenergy with a carbon capture and storage (BECCS) system. The treated flue gas has a flow rate of 23 tons/hour (t/h) with 11.54 vol% CO 2 and a 90% capture rate is aimed for. Aspen Plus V14 was employed for process simulations. Initially, binary interaction parameters for AMP/PZ, AMP/H 2 O, and PZ/H 2 O are regressed using vapor-liquid equilibrium (VLE) data, which were retrieved from literature along with reaction kinetics. Validation of parameters from available experimental literature yields an average absolute relative deviation (AARD) of only 5.9%. Afterwards, a process simulation model is developed and validated against experimental data from a reference pilot plant, using a similar AMP/PZ blend, resulting in 5% AARD. Next, a sensitivity analysis optimizes operating conditions, including solvent rate, absorber/stripper packing heights, and stripper pressure, based on regeneration energy impact. Optimized results, compared to MEA, reveal that AMP/PZ reduces the energy consumption from 3.61 to 2.86 GJ/tCO 2 . The retrofitting of the capture unit onto the selected CHP plant is examined through the development of a dedicated model. Two control strategies are compared to address energy unavailability for supplying the capture unit. The analysis spans 4 months, selected to account for seasonal variations. At nominal capacity, CO 2 emissions, rendered negative by biomass combustion and CO 2 capture, reach a maximum of −3.4 tCO 2 /h compared to 0.36 tCO 2 /h before retrofitting. Depending on the control strategy and CHP plant operating point, the Specific Primary Energy Consumption for CO 2 Avoided (SPECCA) ranges from 4.91 MJ/kgCO 2 to 1.76 MJ/kgCO 2 . Finally, an economic comparison based on systematic methodology reveals a 7.87% reduction in capture cost favoring the AMP/PZ blend. Together, these findings highlight AMP/PZ as a highly favorable alternative solvent.

Technical-economic analysis of [Bmim][BF4] for the post-combustion CO2 capture at ”Termocentro” thermoelectric plant, Colombia

Aspen plus supported design of pre-combustion CO2 capture processes based on ionic liquids

Techno-economic analysis of AMP/PZ solvent for CO2 capture in a biomass CHP plant: towards net negative emissions

Cost and Heat Integration Analysis for CO2 Removal Using Imidazolium-Based Ionic Liquid -ASPEN PLUS Modelling Study

Optimization of Post Combustion CO2 Capture from a Combined-Cycle Gas Turbine Power Plant via Taguchi Design of Experiment

Post-combustion carbon capture process modeling, simulation, and assessment of synergistic effect of solvents

Modelling and Process Analysis of Post-Combustion Carbon Capture with the Blend of 2-Amino-2-methyl-1-propanol and Piperazine

Assessment of Hybrid Solvent—Membrane Configurations for Post-Combustion CO2 Capture for Super-Critical Power Plants

Modeling and Simulation of CO2 Capture Unit using Mixed Solvent of Aqueous Methyldiethanolamine and Piperazine for 6.4 MWe Power Plant

Techno-economic Evaluation of Post-Combustion Carbon Capture Based on Chemical Absorption for the Thermal Cracking Furnace in Ethylene Manufacturing

Heat Integration, Process Design and Techno-Economic Assessment of Post-Combustion Carbon Capture Using Piperazine for Large-Scale Ethylene Plant

Techno-economic analysis and optimisation of Piperazine-based Post-combustion carbon capture and CO 2 compression process for large-scale biomass-fired power plants through simulation

CO2 Utilization Via Integration of an Industrial Post-Combustion Capture Process with a Urea Plant: Process Modelling and Sensitivity Analysis

4E Evaluation and Multi-Objective Optimization of Low Concentration Flue Gas CO2 Capture and Multi-Product Conversion Process

Modeling, validation and exergy evaluation of a thermally-integrated industrial cryogenic air separation plant in Colombia

Membrane CO2 Separation System Improvement for Coal-Fired Power Plant Integration

Thermoeconomic Analysis and Optimization of Post‐combustion CO2 Recovery Unit Utilizing Absorption Refrigeration System for a Natural‐gas‐fired Power Plant

Techno-Economic Evaluation on Solar-Assisted Post-Combustion CO2 Capture in Hollow Fiber Membrane Contactors

Novel Postcombustion Capture Process for CO2 from the Flue Gas of Coal-Fired Power Plants Using a Green Deep Eutectic Solvent

Multistage Circulation Absorption Improvement: Simulation and Energy-Saving Evaluation of an Innovative Amine-Based CO2 Capture Process

Modeling and Techno-Economic Optimization of a Tetraamine-Appended Metal–Organic Framework for NGCC-Based CO 2 Capture Using Fixed Bed Contactors