Abstract:The ejector refrigeration cycle (ERC) is often used as the sub-cycle of power and cooling cogeneration systems due to its advantages of simple structure design, few moving parts, less system investment, good stability and reliable operation. Considering the potential of organic Rankine cycle (ORC) in the utilization of low-grade heat, and the advantages of simple structure and many choices for working fluid, a novel power and cooling cogeneration system was designed, based on dual-pressure evaporation ORC (DORC) and ERC. In this system, a common condenser was used by DORC and ERC, and a part of working fluid separated from low-pressure steam generator outlet in DORC was used as the primary flow of ejector to drive ERC. A mathematical model for calculating the thermodynamic and thermoeconomic performances of the system was established. Sensitivity analysis was performed to determine the key parameters of the system, the results showed that the low-pressure evaporation temperature (TLPSG,out), high-pressure evaporation temperature (THP,E), vapor fraction of the low-pressure steam generator outlet (xLPSG,out) and working fluid mass flow ratio of high-pressure stage to low-pressure stage (k) were the four key parameters of the system. Parametric analysis showed that higher TLPSG,out and lower xLPSG,out were beneficial to increase the cooling output and thermal efficiency, while higher THP,E and larger k were helpful to increase the net power output and exergy efficiency. The net power output and exergy efficiency can be optimized by TLPSG,out and xLPSG,out. Using genetic algorithm (GA), multi-objective function optimization was carried out with THP,E, TLPSG,out, xLPSG,out and k as the decision variables. Moreover, the system's adaptability for working fluids R245fa, R236ea, R600, R600a, R601 and R601a was investigated. According to the optimization results, R236ea was the most suitable working fluid. When THP,E was 402.43K, TLPSG,out was 392.42K, xLPSG,out was 0.357 and k was 0.321, the calculated net power output , cooling output, thermal efficiency, exergy efficiency and total cost of unit exergy product (SUCP) were 273.00kW, 121.80kW, 14.52%, 44.03% and 42.62$/MWh, respectively. Exergy analysis was conducted using R236ea as working fluid. The results showed that the two steam generators and condenser were the main components responsible for most of the exergy destruction of the system in both basic case and optimized case. Compared to the basic case, the exergy destruction of the steam generators decreased by about 32.3%, and the total exergy destruction of the system decreased by about 5.0% in optimized case.

Modeling, validation and exergy evaluation of a thermally-integrated industrial cryogenic air separation plant in Colombia

Modeling, Characteristic Analysis and Optimization of an Improved Heat‐Integrated Air Separation Column

Advanced Exergy Analyses of an Ejector Expansion Transcritical Co2 Refrigeration System

Exergetic Analysis of a Cryogenic Air Separation Unit

Modeling, Characteristic Analysis, and Optimization of Ideal Internal Thermally Coupled Air Separation Columns

Detailed Design and Economic Evaluation of a Cryogenic Air Separation Unit with Recent Literature Solutions

Design and analysis of cryogenic CO2 separation from a CO2‐rich mixture

Conventional and Advanced Exergetic Analysis for the Combined Cycle of Power Plant With Gas Turbine of a Refinery

Evaluation of Two-Column Air Separation Processes Based on Exergy Analysis

Simulation study of cryogenic air separation unit using Aspen Hysys at Rourkela steel plant

Process Modeling and Exergy Analysis for a Typical VOC Thermal Conversion Plant

Technical-economic analysis of [Bmim][BF4] for the post-combustion CO2 capture at ”Termocentro” thermoelectric plant, Colombia

Exergy-Based Optimization of a CO2 Polygeneration System: A Multi-Case Study

Efficient enhancement of cryogenic processes: Extracting valuable insights with minimal effort

Enhancing energy efficiency: Design and simulation of air fractionation unit integrated through LNG cold energy and two‐stage organic Rankine cycles

3E analysis and multi-objective optimization of a trans-critical ejector-assisted Co2 refrigeration cycle combined with thermo-electric generator

Modeling and simulation of a small-scale solar-powered absorption cooling system in three cities with a tropical climate

Thermodynamic and thermoeconomic performance analyses and optimization of a novel power and cooling cogeneration system fueled by low-grade waste heat

Thermodynamic Analysis of an Organic Rankine–vapor Compression Cycle (ORVC) Assisted Air Compression System for Cryogenic Air Separation Units

Energy, exergy, and environmental assessment of a small-scale solar organic Rankine cycle using different organic fluids

Advanced Exergy-Based Optimization of a Polygeneration System with CO2 as Working Fluid