Abstract:Biomass-derived carbon (BDC) is viewed as one of the most promising anode candidates for sodium-ion batteries (SIBs) owing to its natural abundance, low cost, and sustainability. However, fabrication of BDC with a preferred microstructure and morphology for high-performance sodium storage still remains a dilemma. Herein, we report using natural parasol fluff as a biomass precursor to highlight the significant role of the tubular structure for achieving high electrochemical performances with BDC. Different from high-temperature pyrolysis (over 1000 °C) commonly used for BDC, the interconnected porous carbon framework with a well-maintained tubular structure was prepared in a mild calcination temperature of 500 °C with the aid of KOH activation and Co2+-assisted graphitization. The as-prepared material with a large interlayer spacing (0.405 nm) and abundant self-doping heteroatoms demonstrates its excellent performance as the anode of SIBs by delivering a reversible capacity of 359.0 mA h g–1 at 30 mA g–1. Impressively, its full-cell capacity reaches 257.2 mA h g–1 at 30 mA g–1, which is among the highest values for carbon-based full-cell assembly. In addition to offering a potential industrializable BDC choice, this work highlights the significance of the tubular structure and provides tactics for screening of biomass precursors as well as the design of high-performance carbonaceous materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00521?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00521</a>.SEM images; Raman spectra; electrochemical performances of corresponding samples' capacitive contribution analysis; heteroatom content; XPS result; performance comparisons with other BDC; impedance parameters of NPF samples; and diffusion coefficient values (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00521/suppl_file/ae1c00521_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Nitrogen-doped hard carbon derived from agro-food waste of mushroom bags biomass as an anode material for sodium-ion batteries

Lignin-Derived Nitrogen-Doped Porous Carbon as a High-Rate Anode Material for Sodium Ion Batteries

Biomass Waste Inspired Nitrogen-Doped Porous Carbon Materials As High-Performance Anode for Lithium-Ion Batteries

A Green Route N, S-Doped Hard Carbon Derived from Fruit-Peel Biomass Waste as an Anode Material for Rechargeable Sodium-Ion Storage Applications

Preparation of Biomass-Derived Carbon Loaded with MnO2 As Lithium-Ion Battery Anode for Improving Its Reversible Capacity and Cycling Performance

Biomass‐Derived, Nitrogen‐Rich Carbon Tubes as Anodes for Sodium‐Ion Hybrid Capacitors

Hard carbon anode derived from pre-treated bio-waste sugarcane bagasse for high capacity sodium-ion battery fabricated with bio-deFgradable porous polymer electrolyte

Direct Chitin Conversion to N-doped Amorphous Carbon Nanofibers for High-Performing Full Sodium-Ion Batteries

N, S self‐doped porous carbon with enlarged interlayer distance as anode for high performance sodium ion batteries

Black fungus derived N-doped carbon decorated with cobalt nanoparticles for efficient sodium storage

Intrinsically Nitrogen-Enriched Biomass-Derived Hard Carbon with Enhanced Performance as a Sodium-Ion Battery Anode

Carbonization of Corn Leaf Waste for Na-Ion Storage Application Using Water-Soluble Carboxymethyl Cellulose Binder

Biomass Inspired Nitrogen Doped Porous Carbon Anode with High Performance for Lithium Ion Batteries

Naturally Nitrogen Doped Porous Carbon Derived from Waste Shrimp Shells for High-Performance Lithium Ion Batteries and Supercapacitors

Microwave-assisted synthesis of nitrogen-doped activated carbon as an oxygen reduction catalyst in microbial fuel cells

Nitrogen-doped porous hard carbons derived from shaddock peel for high-capacity lithium-ion battery anodes

Nitrogen-Doped Biomass-Derived Carbon Formed by Mechanochemical Synthesis for Lithium-Sulfur Batteries

The Novel N-rich Hard Carbon Nanofiber As High-Performance Electrode Materials for Sodium-Ion Batteries

In Situ Construction of Nitrogen-Doped and Zinc-Confined Microporous Carbon Enabling Efficient Na+-Storage Abilities

Advantageous Tubular Structure of Biomass-Derived Carbon for High-Performance Sodium Storage

Construction and preparation of nitrogen-doped porous carbon material based on waste biomass for lithium-ion batteries