Abstract:Carbon-based anode materials hold a promising future for sodium-ion batteries (SIBs) due to their natural abundance and low cost of development. In spite of carbon's important role in the commercialization of lithium-ion batteries (LIBs), further exploration is necessary in order to find high-performance, high-rate carbon anode materials for SIBs. A honeycomb-like, nitrogen-rich (17.72 at%), hierarchically porous, and highly disordered carbonaceous material (N-HC) with an expanded interlayer distance (0.44 nm in average) is synthesized by spray drying and subsequent pyrolysis under flowing NH3. The hierarchically porous structure and rich nitrogen doping result in a large specific surface area (722 m2 g−1), more defects and active sites, and greater functional interface accessibility for the active porous carbonaceous material and electrolyte. When N-HC is used as the anode material for SIBs, the batteries display favorable discharge capacities (255.9 mA h g−1 in the 3000th cycle at 500 mA g−1) and good capacitive-energy-storage behavior (67% at a scan rate of 0.5 mV s−1) with excellent high-rate performance and ultra-stable cyclability over 10,000 cycles at 5000 mA g−1. Our results show that the combination of the hierarchically porous structure and nitrogen doping leads to improved energy storage by increasing the capacitive energy storage, which enhances the high-rate performance of N-HC. To further enhance the performance of the material, an electrical pretreatment is employed to increase the initial Coulombic efficiency of N-HC to 79.5%, a record high for an SIB cell. A full cell with an N-HC anode and a Na3V2(PO4)3/C cathode shows a high capacity with a favorable cyclability (238.7 mA h g−1 after 100 cycles at 100 mA g−1 and a capacity retention of 95.3% compared to the second cycle).

N, S self‐doped porous carbon with enlarged interlayer distance as anode for high performance sodium ion batteries

Lignin-Derived Nitrogen-Doped Porous Carbon as a High-Rate Anode Material for Sodium Ion Batteries

A Hierarchical N/S‐Codoped Carbon Anode Fabricated Facilely from Cellulose/Polyaniline Microspheres for High‐Performance Sodium‐Ion Batteries

Electrode Materials: A Hierarchical N/S-Codoped Carbon Anode Fabricated Facilely from Cellulose/Polyaniline Microspheres for High-Performance Sodium-Ion Batteries (Adv. Energy Mater. 6/2016)

A Facile and Cost Effective Synthesis of Nitrogen and Fluorine Co-doped Porous Carbon for High Performance Sodium Ion Battery Anode Material

Nitrogen-Rich Mesoporous Carbon As Anode Material for High-Performance Sodium-Ion Batteries

S-doped Porous Carbon Anode with Superior Capacity for High-Performance Sodium Storage

Enhanced electronic conductivity and sodium-ion adsorption in N/S co-doped ordered mesoporous carbon for high-performance sodium-ion battery anode

Nitrogen-doped Porous Carbon Derived from Horn As an Advanced Anode Material for Sodium Ion Batteries

Porous nitrogen doped carbon sphere as high performance anode of sodium-ion battery

Nitrogen and Sulfur Co-doped Mesoporous Carbon for Sodium Ion Batteries

Porous Hard Carbon Derived from Walnut Shell as an Anode Material for Sodium-Ion Batteries

Dual Heteroatom-Doped Biomass-Derived Porous Carbon Anode for Superior Sodium Storage

Sulfur-Doped Carbon with Enlarged Interlayer Distance As A High-Performance Anode Material for Sodium-Ion Batteries

Enhancing capacitive storage of carbonaceous anode by surface doping and structural modulation for high-performance sodium-ion battery

Nitrogen and Sulfur Co-Doped Hierarchically Mesoporous Carbon Derived from Biomass As High-Performance Anode Materials for Superior Sodium Storage

Nitrogen-rich hierarchically porous carbon as a high-rate anode material with ultra-stable cyclability and high capacity for capacitive sodium-ion batteries

Insight into the structure-capacity relationship in biomass derived carbon for high-performance sodium-ion batteries

Nitrogen-rich Porous Carbon Anode with High Performance for Sodium Ion Batteries

Self-doped Carbon Architectures with Heteroatoms Containing Nitrogen, Oxygen and Sulfur As High-Performance Anodes for Lithium-and Sodium-Ion Batteries

Lignin-derived Nitrogen-Doped Porous Ultrathin Layered Carbon As a High-Rate Anode Material for Sodium-Ion Batteries