Abstract:Manganese oxide with high theoretical specific capacity and intermediate reaction plateau is a promising anode candidate for lithium-ion hybrid capacitors (LIHCs). However, the sluggish kinetics and severe volume expansion have seriously hindered its practical progress. Herein, a mixed-valence manganese oxide confined by a dual-carbon skeleton network (MnOx@C-R) was successfully prepared. Owing to the synergistic effect of the introduction of the dual-carbon skeleton-network structure in a reducing atmosphere, the reasonable pore size distribution, crystallinity, and phase composition have been optimized. The material exhibits excellent lithium storage performance (778.2 mA h g–1 after 10 cycles at 0.1 A g–1), along with excellent rate performance (141.7 mA h g–1 at 5 A g–1) and stable cycling ability (402.4 m Ah g–1 for 1000 cycles at 1 A g–1). Moreover, further characterization displayed the change of the valence state of manganese during the charging/discharging, revealing the source of the excellent electrochemical performance of MnOx@C-R. Therefore, LIHCs were assembled using a MnOx@C-R anode and the activated carbon network with excellent energy density (151 Wh kg–1) and amazing power density (21.9 kW kg–1). This work supplies an alternative strategy for optimizing the lithium storage performance of manganese oxide.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c02116.Raman spectra of MnOx@C and MnOx@C-R; TG and DTG of MnOx@C-R; C 1s, O 1s, and N 1s XPS spectra of MnOx@C-R and MnOx@C; SEM images of MnOx; SEM images of MnOx@C; the DFT pore size distribution of MnOx@C-R and MnOx@C; microstructure analysis of MnOx@C; capacity contribution of different voltage ranges of MnOx@C-R; CV curves of MnOx and MnOx@C at 0.1 mV s–1; GCD curves of the first three cycles of MnOx and MnOx@C at 0.1 A g–1; cycling performance of MnOx-R; values of b plotted, and percentage of capacitance contribution at different scanning rates; electrochemical reaction mechanism at different voltage intervals; GITT test; EX-XPS spectra of powder samples and discharging/charging: full spectra and high-resolution O 1s; Nyquist plots of MnOx@C-R and MnOx@C; SEM images of GLC and AGLC; N2 adsorption–desorption isotherms of GLC and AGLC; electrochemical performance of AGLC cathode; GCD curves of LIHCs at different mass ratios of LIHCs; BET parameters of MnOx@C and MnOx@C-R; capacity and ratio of different voltage ranges of MnOx@C-R and MnOx@C; different voltage capacitive behavior at different scan rates; BET parameters of the AGLC and GLC (PDF)This article has not yet been cited by other publications.

Preparation of Biomass-Derived Carbon Loaded with MnO2 As Lithium-Ion Battery Anode for Improving Its Reversible Capacity and Cycling Performance

A Nonflammable Electrolyte Enabled High Performance K0.5MnO2 Cathode for Low-Cost Potassium-Ion Batteries

Deciphering the storage mechanism of biochar anchored with different morphology Mn3O4 as advanced anode material for lithium-ion batteries

N-Containing Porous Carbon-Based MnO Composites as Anode with High Capacity and Stability for Lithium-Ion Batteries

Nitrogen-doped Carbon with Modulated Surface Chemistry and Porous Structure by a Stepwise Biomass Activation Process towards Enhanced Electrochemical Lithium-Ion Storage

Facile Route to Biomass-Derived 1D Carbon Fiber Supported High-Performance MnO-based Nanocomposite Anode Material

High-Capacity and Self-Stabilized Manganese Carbonate Microspheres As Anode Material for Lithium-Ion Batteries.

1D Core‐shell MnO@S, N Co‐doped Carbon for High Performance Lithium Ion Battery Anodes

Catkin-derived carbon microtubes for hybrid anode materials of high-performance lithium ion batteries

Multidimensional Dual-Carbon Skeleton Network Confined MnO x Anode Boosting High-Performance Lithium-Ion Hybrid Capacitors

In-situ embedding of ultrasmall MnO nanoparticles into pollen biomass-derived hollow porous N heteroatoms enriched carbon microspheres as high-performance anode for lithium-ion batteries

An ecofriendly and universal strategy to balance the active sites and electric conductivity of biomass-derived carbon for superior lithium storage

Biomass-Derived Activated Carbon for Rechargeable Lithium-Sulfur Batteries

Rational design of 3D net-like carbon-based Mn3O4 anode material with an enhanced lithium storage performance

Accelerating the Activation of Li2MnO3 in Li-rich High-Mn Cathodes to Improve Its Electrochemical Performance.

Interface Engineering Enabled High-Performance Layered P3-Type K 0.5 MnO 2 Cathode for Low-Cost Potassium-Ion Batteries

N-doped carbon coated porous hierarchical MnO microspheres as superior additive-free anode materials for lithium-ion batteries

One-pot synthesis of nanosized MnO incorporated into N-doped carbon nanosheets for high performance lithium storage

Preparation and Characterization of Li1.167-K Mn0.583Ni0·25O2 (x=0, 0.025, 0.05 and 0.075) As Cathode Materials for Highly Reversible Lithium-Ion Batteries

Revealing the Indispensable Role of In Situ Electrochemically Reconstructed Mn(II)/Mn(III) in Improving the Performance of Lithium‐Carbon Dioxide Batteries

Molten-Salt-Assisted Synthesis of Hierarchical Porous MnO@Biocarbon Composites as Promising Electrode Materials for Supercapacitors and Lithium-Ion Batteries