Abstract:The overall performance of carbon-based materials for sodium-ion batteries (SIBs) is still restricted by the sluggish transfer kinetics of Na+ and limited rate capability. Specifically, introducing ultramicropores (pores width <0.7 nm) into carbon materials may be effective in improving the anode performance of SIBs. However, due to the difficulty of their synthesis and homogeneity regulation, ultramicroporous carbon as advanced SIB anodes as well as their sodium storage mechanisms have seldom been investigated. Herein, carbon spheres with centralized ultramicropores and abundant C═O is facilely obtained by combining the in situ ion activation and the novel quantitative air-assisted carbonization process for the first time. The quantitative air acts not only as a mild agent to activate the materials, but also as an oxygen dopant for forming oxygen-containing functional groups. As the optimized anode, quantitative air-assisted carbonized spheres with a precursor weight of 0.3 g (QACS-0.3) delivers a high rate capability (265 and 121 mAh g–1 at 0.05 and 5.0 A g–1, respectively) and good cycling stability (126 mAh g–1 after 5000 cycles at 5.0 A g–1). Kinetic analysis, theoretical calculation, and ex situ testing technologies reveal that the ultramicropores can facilitate the diffusion of Na+ below 0.2 V; the synergistic effect of defects, C═O, and ultramicropores can extend the discharge curves and effectively improve the adsorption capacity of carbon materials. Additionally, a new discharge model is proposed to explain the sodium storage behaviors in these electrodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.1c01885?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.1c01885</a>.XRD patterns, CV curves, and cycling performance of DCS and QACS-0.3; calculation method for GITT; ex XPS curves of the charging process; SEM and TEM images, XRD, Raman, XPS, and nitrogen adsorption–desorption curves of QACSs; CV, GC, cycling performance, electrical resistivity, and EIS plots of QACSs; SEM images, pore size distribution, and XPS spectra of DPCS and QPCS; and comparison of cycling and rate performance of QACS-0.3 with other glucose-derived materials for sodium-ion batteries (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c01885/suppl_file/sc1c01885_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Advantageous Tubular Structure of Biomass-Derived Carbon for High-Performance Sodium Storage

Electrode Materials: A Hierarchical N/S-Codoped Carbon Anode Fabricated Facilely from Cellulose/Polyaniline Microspheres for High-Performance Sodium-Ion Batteries (Adv. Energy Mater. 6/2016)

A Hierarchical N/S‐Codoped Carbon Anode Fabricated Facilely from Cellulose/Polyaniline Microspheres for High‐Performance Sodium‐Ion Batteries

Insight into the structure-capacity relationship in biomass derived carbon for high-performance sodium-ion batteries

Hierarchical Bismuth–Carbon Microfoam Hybrid Structure Achieves Superior Sodium-Ion Storage

Evaluating the Storage Behavior of Superior Low-Cost Anode Material from Biomass for High-Rate Sodium-Ion Batteries

The Induced Formation and Regulation of Closed-Pore Structure for Biomass Hard Carbon As Anode in Sodium-Ion Batteries

Boosting Sodium Storage Performance of Hard Carbon Anodes by Pore Architecture Engineering

Biomass-derived hard carbon microtubes with tunable apertures for high-performance sodium-ion batteries

Engineering Ultramicroporous Carbon with Abundant C═O as Extended “Slope-Dominated” Sodium Ion Battery Anodes

One-step production of capacitive-dominated carbon anode derived from biomass for sodium-ion batteries

Controlled synthesis of multi-doped highly-disordered porous biomass carbon microsphere for ultra-stable and fast sodium storage

Architecting Braided Porous Carbon Fibers Based on High‐Density Catalytic Crystal Planes to Achieve Highly Reversible Sodium‐Ion Storage

Hierarchical pores from microscale to macroscale boost ultrahigh lithium intercalation pseudocapacitance of biomass carbon

Tailoring 2D Heteroatom‐Doped Carbon Nanosheets with Dominated Pseudocapacitive Behaviors Enabling Fast and High‐Performance Sodium Storage

Hard Carbon Microsphere with Expanded Graphitic Interlayers Derived from a Highly Branched Polymer Network as Ultrahigh Performance Anode for Practical Sodium-Ion Batteries

B, O and N Codoped Biomass-Derived Hierarchical Porous Carbon for High-Performance Electrochemical Energy Storage

Biomass-Derived Carbon for High-Performance Lithium-Sulfur Batteries

Engineering of N, P co-doped hierarchical porous carbon from sugarcane bagasse for high-performance supercapacitors and sodium ion batteries

Molten Salt-Mediated Hierarchical Porous Carbon Derived from Biomass Waste for High-Performance Capacitive Storage

Agar‐Derived Slope‐Dominated Carbon Anode with Puparium Like Nano‐Morphology for Cost‐Effective SIBs