Abstract:N-doped porous carbon (N-PC) is considered as a promising candidate for electrochemical energy storage. However, the complicated multistep process is the biggest bottleneck. Here, a facile one-step strategy was employed to fabricate the N-doped porous carbon via the co-pyrolysis of urea and poly(acrylic acid- co -maleic acid) sodium salt (PAMS) without the protection of inert gas at 550 °C. When the mass ratio of urea to PAMS is 4:1, the microstructure and electrochemical properties of the as-prepared sample (N-4PC) are obviously improved compared with that of the direct carbonization of PAMS (PC). N-4PC presents salient peculiarities with much more mesopores, higher specific surface area of 181.5 m 2 g −1 far more than PC (23.6 m 2 g −1 ), and its nitrogen content is up to 10.61 at. %. In a three-electrode configuration using 6 M KOH, owing to the synergistic effect of pyridinic N, pyrrolic N and graphitic N atoms, N-4PC shows an outstanding specific capacity of 210 F g −1 far more than that of PC (93 F g −1 ) at 1 A g −1 , and a significant capacity retention rate of 79 % much higher than PC (47 %) at 20 A g −1 . Furthermore, the symmetric supercapacitor fabricated by N-4PC delivers an attractive specific capacitance of 140 F g −1 at 1 A g −1 , and 4.9 Wh kg −1 energy density when the power density is 265 W kg −1 in 6 M KOH. The equipment achieves superior cycle stability with capacity retention of 97 % after 7000 cycles at 1 A g −1 . Additionally, N-4PC also achieves great energy densities of 6.7 Wh kg −1 at the power density of 372.3 W kg −1 in 1 M H 2 SO 4 and 12.5 Wh kg −1 at the power density of 521.5 W kg −1 in 1 M Li 2 SO 4 . The fabricated nitrogen-doped porous carbon material has a great potential application prospect in energy storage equipment.

Fabrication of N‐doped Porous Carbon Materials by Biomass Carbonization for Energy Storage, Electroanalysis and Metal Ion Removal

Porous Carbon Globules with Moss-Like Surfaces from Semi-Biomass Interpenetrating Polymer Network for Efficient Charge Storage

N, S Co-doped hierarchical porous carbon rods derived from protic salt: Facile synthesis for high energy density supercapacitors

One-step synthesis of polymer based N-doped porous carbon with enriched nitrogen content and its enhanced electrochemical properties in supercapacitors

Bifunctional Nitrogen-Doped Microporous Carbon Microspheres Derived from Poly(o-methylaniline) for Oxygen Reduction and Supercapacitors.

Phosphorus and Nitrogen Codoped Porous Carbon Nanosheets for Energy Storage and Gas Adsorption

Nitrogen‐doped Hierarchical Few‐layered Porous Carbon for Efficient Electrochemical Energy Storage

Preparation of biomass-based N, P, and S co-doped porous carbon with high mesoporosity based on the synergistic effect of NaOH/thiourea and melamine phosphate and its application in high performance supercapacitors

Nitrogen-enriched hierarchical porous carbon with enhanced performance in supercapacitors and lithium-sulfur batteries

Mesopore-dominant defective nitrogen-doped tubular porous carbon for electrochemical energy storage

Porous N-doped carbon material derived from prolific chitosan biomass as a high-performance electrode for energy storage

Fabrication of dually N/S-doped carbon from biomass lignin: Porous architecture and high-rate performance as supercapacitor

Nitrogen and Sulfur Codoped Porous Carbon Directly Derived from Potassium Citrate and Thiourea for High-Performance Supercapacitors.

Facile synthesis of nitrogen-doped carbon nanosheets with hierarchical porosity for high performance supercapacitors and lithium–sulfur batteries

Increasing S Dopant and Specific Surface Area of N/S-codoped Porous Carbon by In-Situ Polymerization of PEDOT into Biomass Precursor for High Performance Supercapacitor

An environmentally friendly process to derive N/O/S-codoped porous carbon from biomass waste with high yield for high performance supercapacitor

One-step Carbonization of Poly(styrene/divinylbenzene) to Fabricate N-doped Porous Carbon for High-Performance Supercapacitor Electrode

Aminal/Schiff‐Base Polymer to Fabricate Nitrogen‐Doped Porous Carbon Nanospheres for High‐Performance Supercapacitors

Efficient Preparation of Biomass‐Based Ultra‐Thin 2D Porous Carbon Materials by in Situ Template‐Activation and Its Application in Sodium Ion Capacitors

One pot synthesis of nitrogen-doped hierarchical porous carbon derived from phenolic formaldehyde resin with sodium citrate as activation agent for supercapacitors

Fabrication of high density and nitrogen-doped porous carbon for high volumetric performance supercapacitors