Abstract:N-doped porous carbon (N-PC) is considered as a promising candidate for electrochemical energy storage. However, the complicated multistep process is the biggest bottleneck. Here, a facile one-step strategy was employed to fabricate the N-doped porous carbon via the co-pyrolysis of urea and poly(acrylic acid- co -maleic acid) sodium salt (PAMS) without the protection of inert gas at 550 °C. When the mass ratio of urea to PAMS is 4:1, the microstructure and electrochemical properties of the as-prepared sample (N-4PC) are obviously improved compared with that of the direct carbonization of PAMS (PC). N-4PC presents salient peculiarities with much more mesopores, higher specific surface area of 181.5 m 2 g −1 far more than PC (23.6 m 2 g −1 ), and its nitrogen content is up to 10.61 at. %. In a three-electrode configuration using 6 M KOH, owing to the synergistic effect of pyridinic N, pyrrolic N and graphitic N atoms, N-4PC shows an outstanding specific capacity of 210 F g −1 far more than that of PC (93 F g −1 ) at 1 A g −1 , and a significant capacity retention rate of 79 % much higher than PC (47 %) at 20 A g −1 . Furthermore, the symmetric supercapacitor fabricated by N-4PC delivers an attractive specific capacitance of 140 F g −1 at 1 A g −1 , and 4.9 Wh kg −1 energy density when the power density is 265 W kg −1 in 6 M KOH. The equipment achieves superior cycle stability with capacity retention of 97 % after 7000 cycles at 1 A g −1 . Additionally, N-4PC also achieves great energy densities of 6.7 Wh kg −1 at the power density of 372.3 W kg −1 in 1 M H 2 SO 4 and 12.5 Wh kg −1 at the power density of 521.5 W kg −1 in 1 M Li 2 SO 4 . The fabricated nitrogen-doped porous carbon material has a great potential application prospect in energy storage equipment.

Fabrication of high density and nitrogen-doped porous carbon for high volumetric performance supercapacitors

Nitrogen-Enriched Hollow Porous Carbon Nanospheres with Tailored Morphology and Microstructure for All-Solid-State Symmetric Supercapacitors

A Novel Synthesis of Hierarchical Porous Carbons from Interpenetrating Polymer Networks for High Performance Supercapacitor Electrodes

Fabrication of nitrogen and phosphorus-codoped porous carbon for high volumetric performance supercapacitors

Nitrogen-doped Hierarchically Porous Carbon Nanosheets Derived from Polymer/graphene Oxide Hydrogels for High-Performance Supercapacitors.

Porous and High Electronic Conductivity Nitrogen-Doped Nano-Sheet Carbon Derived from Polypyrrole for High-Power Supercapacitors

Full-faradaic-active nitrogen species doping enables high-energy-density carbon-based supercapacitor

One-step synthesis of polymer based N-doped porous carbon with enriched nitrogen content and its enhanced electrochemical properties in supercapacitors

Synthesis of ultrahigh-surface-area nitrogen-doped porous carbon materials from carboxymethyl cellulose based protic polyanion ionic liquids for high performance supercapacitors

Facile 3D Nitrogen‐Doped Hierarchical Porous Carbon for High‐Performance Supercapacitors

High Performance Supercapacitors Electrode Based on N-Doped Carbon Nanofibers

Fabrication of high performance structural N-doped hierarchical porous carbon for supercapacitors

Polymerization-Pyrolysis-Derived Hierarchical Nitrogen-Doped Porous Carbon for Energetic Capacitive Energy Storage

Nitrogen-doped interpenetrating porous carbon/graphene networks for supercapacitor applications

Porous Carbon with Facial Tuning of the Heteroatom N by Polyvinylidene Chloride Dehalogenation Toward Enhanced Supercapacitor Performance

Synthesis of Nitrogen-Doped Porous Carbon Nanofibers As an Efficient Electrode Material for Supercapacitors.

Self-template Synthesis of Nitrogen-Doped Porous Carbon Derived from Rice Husks for the Fabrication of High Volumetric Performance Supercapacitors

High-performance supercapacitors prepared on the base of nitrogen-doped tubular porous carbon from polypyrrole coated Juncus effusus

Fabrication of Porous Carbon Nanosheets with the Engineered Graphitic Structure for Electrochemical Supercapacitors

Designing Nanographitic Domains in N-doped Porous Carbon Foam for High Performance Supercapacitors

Nitrogen‐Doped Porous Graphene Coated with Fe3O4 Nanoparticles for Advanced Supercapacitor Electrode Material with Improved Electrochemical Performance