Abstract:A series of nitrogen-doped carbons were prepared by using biomass waste sawdust as carbon source for supercapacitors. A new nitrogen-doping strategy was proposed to introduce nitrogen element into carbons by using ethylenediamine and carbon as nitrogen source through the polymerization reaction on sawdust under moderate conditions. The raw carbons were further activated with KOH to improve the surface area to increase the electric double layer capacitance while the heteroatoms can improve the pseudocapacitance. The prepared carbons were characterized with different techniques and the electrochemical performances were tested. It was found that the nitrogen-doped carbons activated with a KOH to carbon mass ratio of 5 (NC600-800-5) has the largest specific surface area (1674 m(2)g(-1)) and moderate nitrogen content (2.88 wt%). Compared with the carbon without introduction of nitrogen element (C600-800-5), the capacitive performances of nitrogen-doped carbons were greatly improved, which may be due to the increase of pseudocapacitance and the improvement of wettability introduced by nitrogen element. The largest specific capacitance, 367 F g(-1), was reached at 0.5 A g(-1 )in 6 M KOH solution while the specific capacitance of C600-800-5 is only 279 F g(-1). After 10,000 cycles at 3 A g(-1), the specific capacitance can keep 96.7% of the initial value, suggesting the excellent cycling performance. The energy density can reach 8.7 Wh Kg(-1) at a power density of 251.6 W kg(-1). Thus, it is proved that the nitrogendoping strategy is effective and the introduction of nitrogen element to carbons is particularly important to the improvement of the electrochemical performances.

Nitrogen-doped porous carbon derived from biomass waste for high-performance supercapacitor

Porous carbon derived from cashew nut husk biomass waste for high-performance supercapacitors

Hierarchically Porous Nitrogen-Doped Carbon Derived from the Activation of Agriculture Waste by Potassium Hydroxide and Urea for High-Performance Supercapacitors

N-doped Carbons with Hierarchically Micro- and Mesoporous Structure Derived from Sawdust for High Performance Supercapacitors

Template-free Preparation of Nitrogen-Doped Activated Carbon with Porous Architecture for High-Performance Supercapacitors

Synthesis of ultrahigh-surface-area nitrogen-doped porous carbon materials from carboxymethyl cellulose based protic polyanion ionic liquids for high performance supercapacitors

Nitrogen enriched high specific surface area biomass porous carbon: A promising electrode material for supercapacitors

High-Performance Supercapacitors Based on Nitrogen-Doped Porous Carbon from Surplus Sludge

One-Step Synergistic Effect to Produce Two-Dimensional N-Doped Porous Carbon Nanosheets with Ultrahigh Porosity from Biomass for High-Performance Supercapacitors

Ultrahigh yield of nitrogen doped porous carbon from biomass waste for supercapacitor

Nitrogen-doped cornstalk-based biomass porous carbon with uniform hierarchical pores for high-performance symmetric supercapacitors

Peanut shell waste derived porous carbon for high-performance supercapacitors

Nitrogen-doped Hierarchically Ellipsoidal Porous Carbon Derived from Al-based Metal-Organic Framework with Enhanced Specific Capacitance and Rate Capability for High Performance Supercapacitors

Nitrogen and Phosphorus Co-doped Porous Carbon for High-Performance Supercapacitors

Nitrogen-Doped Hierarchical Porous Activated Carbon Derived from Paddy for High-Performance Supercapacitors

Synthesis of Nitrogen-Doped Porous Carbon Nanofibers As an Efficient Electrode Material for Supercapacitors.

N-O-P co-doped porous carbon aerogel derived from low-cost biomass as electrode material for high-performance supercapacitors

Nitrogen-doped carbons derived from cotton pulp for improved supercapacitors

Nitrogen-doped macro-meso-micro hierarchical ordered porous carbon derived from ZIF-8 for boosting supercapacitor performance

Three-dimensional Nitrogen-Doped Hierarchical Porous Carbon Derived from Cross-Linked Lignin Derivatives for High Performance Supercapacitors

Nitrogen-Doped High Surface Area Carbon As Efficient Electrode Material for Supercapacitors