Abstract:Structures having the shape of blades are often found in several practical engineering examples such as turbines and aircraft rotary wings. For reliable and economic designs of the structures, it is necessary to estimate the modal characteristics of those structures accurately. To design these components, the dynamic characteristic, especially near resonant condition, need to be well examined to assure a safe operation. Among the dynamic characteristics of these structures, determining the natural frequencies and associated mode shapes are of fundamental importance in the study of resonant responses. An accurate prediction of the forced response is usually very difficult because of the uncertainty of the excitation. A single free standing blade can be considered as a pretwisted cantilever beam with a rectangular cross-section. The torsional vibration of pre twist cantilever beam of rectangular cross section is done so that this resembles to a blade. The differential equation for the torsional vibration of pre-twisted cantilever beam of rectangular cross section has been obtained. The beam is considered as Timoshenko beam instead of Euler-Bernoulli Beam or Rayleigh Beam because it will consider shear correction factor, rotary inertia, warping constant. The Galerkin’s method is used to obtain the frequencies of various modes of vibration. This is again solved by fem software ANSYS and their results are compared. Introduction The torsional vibration of a rotating structure can occur in many engineering applications such as turbomachinery blades, slewing robot arms, aircraft propellers, helicopter rotors, and spinning spacecraft. To design these components, the dynamic characteristic, especially near resonant condition, need to be well examined to assure a safe operation. Among the dynamic characteristics of these structures, determining the natural frequencies and associated mode shapes are of fundamental importance in the study of resonant responses. It is very important for manufacturers of turbo machinery components to know the natural frequencies of the rotor blades, because they have to make sure that the turbine on which the blade is to be mounted does not have some of the same natural frequencies as the rotor blade. Otherwise, a resonance may occur in the whole structure of the turbine, leading to undammed vibrations, which may eventually wreck the whole turbine. An accurate prediction of the forced response is usually very difficult because of the uncertainty of the excitation. Moreover, under the resonance conditions, what limits the vibration amplitude is the amount of damping available. In most cases, the damping is almost entirely aerodynamic and its assessment is just as uncertain as the excitation. Thus, classic design practice for such structures has been mainly to rely on the knowledge of the natural frequencies to avoid anticipated resonances.

Nonlinear vibrations of a rotating pretwisted blade

Non-linear dynamic analysis of a wind turbine blade

Modal analysis of a rotating twisted and tapered Rayleigh beam

Nonlinear dynamic analysis of a rotating pre-twisted blade with elastic boundary

Nonlinear vibration analysis of horizontal axis wind turbine blades using a modified pseudo arc-length continuation method

Torsional Vibration Analysis of Pre-Twist Cantilever Beam Using FEM

Nonlinear vibration, stability, and bifurcation analysis of unbalanced spinning pre-twisted beam

Analytical modeling of the coupled nonlinear free vibration response of a rotating blade in a gas turbine engine

Vibrations of Pre-Twisted Cantilever Blading Allowing for Rotary Inertia and Shear Deflection

Nonlinear vibration analysis of wind turbine blades

Vibration Analysis of Tapered Pre-Twisted Functionally Graded Rotating Blade

Analysis of the Nonlinear Complex Response of Cracked Blades at Variable Rotational Speeds

Nonlinear Flap-Wise Vibration Characteristics of Wind Turbine Blades Based on Multi-Scale Analysis Method

Free vibration analysis of a rotating graphene nanoplatelet reinforced pre-twist blade-disk assembly with a setting angle

Dynamic Modeling of Helicopter Rotor Blades

Coupled bending-torsional vibrations of rotating cantilever blades—method of polynomial frequency equation

Frequency Lock-In Phenomenon of Vortex Induced Vibration of a Rotating Blade Considering Bending-Torsion Coupling Effect

Vibrational Characteristics of Rotating Soft Cylinders

Influence of flexural-torsional couplings and rotational effects on vibration behaviour of tapered thin-walled anisotropic biconvex beam

Large deflection model for nonlinear flexural vibration analysis of a highly flexible rotor-bearing system

Multiple scales analysis of out-of-plane and in-plane vibrations of a wind turbine blade