Abstract:Structures having the shape of blades are often found in several practical engineering examples such as turbines and aircraft rotary wings. For reliable and economic designs of the structures, it is necessary to estimate the modal characteristics of those structures accurately. To design these components, the dynamic characteristic, especially near resonant condition, need to be well examined to assure a safe operation. Among the dynamic characteristics of these structures, determining the natural frequencies and associated mode shapes are of fundamental importance in the study of resonant responses. An accurate prediction of the forced response is usually very difficult because of the uncertainty of the excitation. A single free standing blade can be considered as a pretwisted cantilever beam with a rectangular cross-section. The torsional vibration of pre twist cantilever beam of rectangular cross section is done so that this resembles to a blade. The differential equation for the torsional vibration of pre-twisted cantilever beam of rectangular cross section has been obtained. The beam is considered as Timoshenko beam instead of Euler-Bernoulli Beam or Rayleigh Beam because it will consider shear correction factor, rotary inertia, warping constant. The Galerkin’s method is used to obtain the frequencies of various modes of vibration. This is again solved by fem software ANSYS and their results are compared. Introduction The torsional vibration of a rotating structure can occur in many engineering applications such as turbomachinery blades, slewing robot arms, aircraft propellers, helicopter rotors, and spinning spacecraft. To design these components, the dynamic characteristic, especially near resonant condition, need to be well examined to assure a safe operation. Among the dynamic characteristics of these structures, determining the natural frequencies and associated mode shapes are of fundamental importance in the study of resonant responses. It is very important for manufacturers of turbo machinery components to know the natural frequencies of the rotor blades, because they have to make sure that the turbine on which the blade is to be mounted does not have some of the same natural frequencies as the rotor blade. Otherwise, a resonance may occur in the whole structure of the turbine, leading to undammed vibrations, which may eventually wreck the whole turbine. An accurate prediction of the forced response is usually very difficult because of the uncertainty of the excitation. Moreover, under the resonance conditions, what limits the vibration amplitude is the amount of damping available. In most cases, the damping is almost entirely aerodynamic and its assessment is just as uncertain as the excitation. Thus, classic design practice for such structures has been mainly to rely on the knowledge of the natural frequencies to avoid anticipated resonances.

Vibration Analysis of Tapered Pre-Twisted Functionally Graded Rotating Blade

Free vibration analysis of pre-twisted rotating FGM beams

Design and Hover Test of Low Vibration Mach Scale Rotor with Twisted Composite Tailored Blade

Torsional Vibration Analysis of Pre-Twist Cantilever Beam Using FEM

Analysis of vibration in rotating pretwisted functionally graded graphene platelets reinforced nanocomposite laminated blades with an attached point mass

Free vibration analysis of a rotating varying-thickness-twisted blade with arbitrary boundary conditions

Modal analysis of a rotating twisted and tapered Rayleigh beam

Free vibration of rotating bifunctional gradient CNTs-reinforced ceramic matrix composites pre-twisted blade in thermal environment

Dynamic analysis of functionally graded rotor-blade system using the classical version of the finite element method

Analytical Solution for Forced Vibration Characteristics of Rotating Functionally Graded Blades under Rub-Impact and Base Excitation

Vibration characteristics of Pre-twisted Rotating Ti-SiC Composite Airfoil Blade

Vibration and Dynamic Stability of Pre-Twisted Thick Cantilever Beam Made of Functionally Graded Material

A Study of the Vibration and Lay-Up Optimization of Rotating Cross-Ply Laminated Nanocomposite Blades

Free Vibration Analysis of Pre-Twisted Rotating Dovetailed Blade under the Flexible Connection with Macro-Micro Rough Contact Topography

THE STRUCTURAL ANALYSIS METHOD OF WIND TURBINE BLADE BASED ON MECHANICS OF COMPOSITE MATERIALS

Optimization of vibration analysis for functionally graded graphene platelets (FGGP) reinforced twisted cantilever thin shallow shell blades subjected to axial loading

Influence of flexural-torsional couplings and rotational effects on vibration behaviour of tapered thin-walled anisotropic biconvex beam

Modal Analysis of a Turbine Blade Based on Fluid-Thermal-Structural Coupling

Applying isogeometric approach for free vibration, mechanical, and thermal buckling analyses of functionally graded variable-thickness blades

Nonlinear Vibration of Rotating Pre-Deformed Blade with Thermal Gradient

Bending and vibration of functionally graded material sandwich plates using an accurate theory