Abstract:Structures having the shape of blades are often found in several practical engineering examples such as turbines and aircraft rotary wings. For reliable and economic designs of the structures, it is necessary to estimate the modal characteristics of those structures accurately. To design these components, the dynamic characteristic, especially near resonant condition, need to be well examined to assure a safe operation. Among the dynamic characteristics of these structures, determining the natural frequencies and associated mode shapes are of fundamental importance in the study of resonant responses. An accurate prediction of the forced response is usually very difficult because of the uncertainty of the excitation. A single free standing blade can be considered as a pretwisted cantilever beam with a rectangular cross-section. The torsional vibration of pre twist cantilever beam of rectangular cross section is done so that this resembles to a blade. The differential equation for the torsional vibration of pre-twisted cantilever beam of rectangular cross section has been obtained. The beam is considered as Timoshenko beam instead of Euler-Bernoulli Beam or Rayleigh Beam because it will consider shear correction factor, rotary inertia, warping constant. The Galerkin’s method is used to obtain the frequencies of various modes of vibration. This is again solved by fem software ANSYS and their results are compared. Introduction The torsional vibration of a rotating structure can occur in many engineering applications such as turbomachinery blades, slewing robot arms, aircraft propellers, helicopter rotors, and spinning spacecraft. To design these components, the dynamic characteristic, especially near resonant condition, need to be well examined to assure a safe operation. Among the dynamic characteristics of these structures, determining the natural frequencies and associated mode shapes are of fundamental importance in the study of resonant responses. It is very important for manufacturers of turbo machinery components to know the natural frequencies of the rotor blades, because they have to make sure that the turbine on which the blade is to be mounted does not have some of the same natural frequencies as the rotor blade. Otherwise, a resonance may occur in the whole structure of the turbine, leading to undammed vibrations, which may eventually wreck the whole turbine. An accurate prediction of the forced response is usually very difficult because of the uncertainty of the excitation. Moreover, under the resonance conditions, what limits the vibration amplitude is the amount of damping available. In most cases, the damping is almost entirely aerodynamic and its assessment is just as uncertain as the excitation. Thus, classic design practice for such structures has been mainly to rely on the knowledge of the natural frequencies to avoid anticipated resonances.

Free vibration analysis of pre-twisted rotating FGM beams

Vibration and Dynamic Stability of Pre-Twisted Thick Cantilever Beam Made of Functionally Graded Material

Vibration Analysis of Tapered Pre-Twisted Functionally Graded Rotating Blade

Analysis of vibration in rotating pretwisted functionally graded graphene platelets reinforced nanocomposite laminated blades with an attached point mass

Effect of Axially Functionally Graded Material on Whirling Frequencies and Critical Speeds of a Spinning Timoshenko Beam

Modified couple stress-based free vibration behavior of pre-twisted tapered BFGM rotating micro beam considering spin-softening and Coriolis effects

Nonlinear free vibration of size-dependent functionally graded microbeams

Bending and vibration of functionally graded material sandwich plates using an accurate theory

Application of the generalized differential quadrature method to study vibration and dynamic stability of tri-directional functionally graded beam under magneto-electro-elastic fields

Torsional Vibration Analysis of Pre-Twist Cantilever Beam Using FEM

Nonlinear free vibration analysis of functionally graded beams by using different shear deformation theories

Analysis of free vibration characteristics of non-uniform graphene-reinforced axially functionally graded nanocomposite beam

Free vibration analysis of an O-pattern graphene reinforced axial functionally graded polymer matrix nano-composite non-uniform beam

Free Vibration Analysis of Centrifugally Stiffened Tapered Functionally Graded Beams

Investigation of the effects of frequency veering phenomenon in a pre-twisted and double-tapered rotating Timoshenko beam

Free Vibration of Orthotropic Functionally Graded Beams with Various End Conditions

Free vibrations of functionally graded porous hanging and standing cantilever beams

The free and forced vibration behavior analysis of multi-stepped FGP-GPLRC curved beam with general boundary conditions

Flapwise bending vibration analysis of rotary tapered functionally graded nanobeam in thermal environment

Free vibration analysis of functionally graded beams using complementary functions method

Flap-wise Vibrations of Non-Uniform Rotating Cantilever Beams: an Investigation with Operational Experiments