Abstract:High-strength titanium (Ti) alloys are progressively demanded for structural applications in weight-critical aerospace industry. Improving mechanical properties of the alloys are thus exploited in response to the requirement. In this study, a strategy of through-transus thermomechanical forging was applied to the Ti-10V-2Fe-3Al metastable β-Ti alloy, and the resulting microstructures and mechanical properties were systematically investigated in comparison to the conventional (α+β) dual-phase field forging. It is found that the through-transus thermomechanical forging significantly enhances strength, ductility and strain hardening capacity, while it is the inferior combinations of mechanical properties in the alloys subjected to the (α+β) dual-phase field forging. Microstructural characterization reveals that the former renders the hierarchical microstructure composed of intergranular αp-necklaces, and intragranular αp-rods as well as αs-lamellae in the β-matrix. The superior combinations of mechanical properties are conferred by good strain compatibility of these microstructural constituents. By contrast, the latter renders the network microstructure comprised of intergranular globular αp-phase and continuous grain boundary (GB) αGB-films as well as the intragranular αs-lamellae. Local deformation-damage is more preferred to initiate in the intergranular network structure. These findings provide fundamental understanding on the correlation between mechanical properties and microstructures, facilitating manufacturing high-performance β-Ti alloys at an industry scale using commercially available thermomechanical processing.

Microstructure and fatigue properties of TC4 titanium alloy treated by α+β forging process

Fatigue property and failure mechanism of TC4 titanium alloy in the HCF and VHCF region considering different forging processes

Experimental Study on Forged TC4 Titanium Alloy Fatigue Properties under Three-Point Bending and Life Prediction

Microstructure evolution of S-TC4 titanium alloy blade preformed by cross wedge rolling

Effect of Heat Treatment on Very High Cycle Fatigue Properties of TC4

Relationship among Forging Technology, Structure and Properties of Tc21 Alloy Bars

Formability and microstructure of TC4 titanium alloy hollow shafts formed by cross-wedge rolling with a mandrel

Comparative study on micro-milling machinability of titanium alloys prepared by different processes: Forging process, additive manufacturing process and heat-treatment process

Microstructure and mechanical properties of TC4 titanium alloy hollow shaft formed by cross wedge rolling

Aging Precipitate of Beta Forged TC17 Titanium Alloy for Aero-Engine

The Effect of Microstructure and Axial Tension on Three-Point Bending Fatigue Behavior of TC4 in High Cycle and Very High Cycle Regimes

Investigation on fatigue performance and microstructure of split sleeve cold expansion of TC4 holes

Influence of Heat Treatment on Microstructure and Mechanical Properties of TC4 Titanium Alloy

Study on Surface Integrity and Fatigue Properties of TC4 Titanium Alloy by Surface Ultrasonic Rolling

Achieving high strength-ductility synergy in a hierarchical structured metastable β-titanium alloy using through-transus forging

Forging–microstructure–tensile properties correlation in a new near β high-strength titanium alloy

A new process chain combining cross-wedge rolling and isothermal forging for the forming of titanium alloy turbine blades

Microstructural effects on the high-cycle fatigue and fracture behaviors of Ti-6Al-4V alloy

Research on the Effect of Quasi-β Forging Deformation on the Structure and Properties of TC21 Titanium Alloy

Effect of Microstructure on Fatigue Properties of Several Ti-Alloys for Aerospace Application

Influence of the volume content of α + β colonies on the very high cycle fatigue behavior of a titanium alloy