Abstract:Organic thin-film transistors (OTFTs) in device physics is currently considered as a standout amongst the most progressive concepts of device applications. Currently, due to humongous technological progress, OTFT with high mobilities can be produced that are comparable to silicon technology. This remarkable mobility is considered as a benchmark for more demanding applications which is accomplished by novel, tenable organic semiconductor materials such as pentacene and the tailoring of their geometries and characteristics. In addition, pentacene demonstrates charge carrier mobilities up to 5.5 cm 2 /Vs. However very low mobility was achieved in OTFTs due to fabrication defects, material processing etc. The most important defect that arise during the fabrication process is contact interfaces in OTFTs, which highly effect the device performance. Thus, in this article, we will review the current progress of contact engineering of OTFTs with special emphasis on electrode/pentacene interfaces of pentacene-based organic thin film transistors. Further, this review aims to provide an in-depth understanding of bottlenecks to improve the OTFTs performance. After a short introduction, the historical background of pentacene-based OTFTs is discussed that focuses on different methods and materials employed so far to improve the contact between pentacene layer. Also, the review presents the key challenges in the geometry of pentacene based OTFT that is the direct deposition of metal electrodes onto the pentacene channel layer in top contact interface due to which poor carrier injection, high barrier height, chemical diffusion between both layers, high contact resistance and surface roughness has been observed which highly affects the device performance especially the field effect mobility. Also, the state-of-the-art devices and related models that widely employ pentacene are presented. This detailed review will assist the future researchers in understanding and improving field-effect properties of OTFTs.

Fabrication of a high-aspect-ratio stainless steel shadow mask and its application to pentacene thin-film transistors

Maskless metal patterning by meniscus-confined electrochemical etching and its application in organic field-effect transistors

Facile Four-Mask Processes for Organic Thin-Film Transistor Integration Structure With Metal Interconnect

Pentacene Field-Effect Transistors with Sub-10-nm Channel Lengths

Planar Nanoscale Architecture for Organic Thin-Film Field-Effect Transistors

Current progress in electrode/pentacene interfaces of pentacene-based organic thin films transistors: A review

Fabrication of Flexible Organic Field Effect Transistor Using Patterned Electrospray Deposition

Forming Tapered Pattern by Cu Electrodeposition Through Mask on Ni Seed Layer for Thin-Film Transistors

3D-printed shadow masks for micro-patterned electrodes

One-Shadow-Mask Self-Assembled Ultralow-Voltage Coplanar Homojunction Thin-Film Transistors

Tapered Cu Pattern Metallization by Electrodeposition Through Mask

High Aspect Ratio Etching of Nanopores in PECVD SiC Through AAO Mask

Studies of tetracene- and pentacene-based organic thin-film transistors fabricated by the neutral cluster beam deposition method

Low-Voltage Junctionless Oxide-Based Thin-Film Transistors Self-Assembled by A Gradient Shadow Mask

Three-Mask Elevated-Metal Metal-Oxide Thin-Film Transistor with Self-Aligned Definition of the Active Island

Wafer level bulk titanium ICP etching using SU8 as an etching mask

Multilayer Si Shadow Mask Processing Of Wafer-Scale Mos2 Devices

Large-scale Fabrication of Field-Effect Transistors Based on Solution-Grown Organic Single Crystals

A hybrid mask–mould lithography scheme and its application in nanoscale organic thin film transistors

Microscale Hybrid Additive Manufacturing of Ultra‐Fine, Embedded Cu/Ag(shell)–P4VP(core) Grid for Flexible Transparent Electrodes

Dry Lithography Patterning of Monolayer Flexible Field Effect Transistors by 2D Mica Stamping