Abstract:Due to the pristine interface of the 2D/3D face-tunneling heterostructure with an ultra-sharp doping profile, the 2D/3D tunneling field-effect transistor (TFET) is considered as one of the most promising low-power devices that can simultane-ously obtain low off-state current (IOFF), high on-state current (ION) and steep subthreshold swing (SS). As a key element for the 2D/3D TFET, the intensive exploration of the tunnel diode based on the 2D/3D heterostructure is in urgent need. The transfer technique composed of the exfoliation and the release process is currently the most common approach to fabri-cating the 2D/3D heterostructures. However, the well-established transfer technique of the 2D materials is still unavailable. Only a small part of the irregular films can usually be obtained by mechanical exfoliation, while the choice of the chemical exfoliation may lead to the contamination of the 2D material films by the ions in the chemical etchants. Moreover, the defor-mation of the 2D material in the transfer process due to its soft nature also leads to the nonuniformity of the transferred film, which is one of the main reasons for the presence of the wrinkles and the stacks in the transferred film. Thus, the large-scale fabrication of the high-quality 2D/3D tunnel diodes is limited. In this article, a comprehensive transfer technique that can mend up the shortages mentioned above with the aid of the water and the thermal release tape (TRT) is proposed. Based on the method we proposed, the MoS2/Si tunnel diode is experimentally demonstrated and the transferred monolayer MoS2 film with the relatively high crystal quality is confirmed by atomic force microscopy (AFM), scanning electron microscopy (SEM), and Raman characterizations. Besides, the prominent negative differential resistance (NDR) effect is observed at room temperature, which verifies the relatively high quality of the MoS2/Si heterojunction. The bilayer MoS2/Si tunnel diode is also experimentally fabricated by repeating the transfer process we proposed, followed by the specific analysis of the electrical characteristics. This study shows the advantages of the transfer technique we proposed and indicates the great application foreground of the fabricated 2D/3D heterostructure for ultralow-power tunneling devices.

Multilayer Si Shadow Mask Processing Of Wafer-Scale Mos2 Devices

Multiple-Patterning Nanosphere Lithography for Fabricating Periodic Three-Dimensional Hierarchical Nanostructures.

Layer-by-layer epitaxy of multilayer MoS2 wafers

Layer-by-layer Epitaxy of Multi-Layer MoS2 Wafers

MoS2/Si Tunnel Diodes Based on Comprehensive Transfer Technique

Wafer-scale Transferred Multilayer MoS2 for High Performance Field Effect Transistors

Scratching lithography for wafer-scale MoS 2 monolayers

Sub-10 Nm Monolayer MoS2 Transistors Using Single-Walled Carbon Nanotubes As an Evaporating Mask

A novel micromachining technology for multilevel structures of silicon

High Performance Few-Layer MoS2 Transistor Arrays with Wafer Level Homogeneity Integrated by Atomic Layer Deposition

Highly reproducible van der Waals integration of two-dimensional electronics on the wafer scale

Scaling behavior of nanoimprint and nanoprinting lithography for producing nanostructures of molybdenum disulfide

Epitaxy of Wafer-Scale Single-Crystal MoS2 Monolayer Via Buffer Layer Control

A novel hardmask-to-substrate pattern transfer method for creating 3D, multi-level, hierarchical, high aspect-ratio structures for applications in microfluidics and cooling technologies

A Novel Synthesis Method for Large-Area MoS 2 Film with Improved Electrical Contact

Stacking monolayers at will: A scalable device optimization strategy for two-dimensional semiconductors

12-inch growth of uniform MoS2 monolayer for integrated circuit manufacture

Laser Thinning and Patterning of MoS2 with Layer-by-Layer Precision

High-Resolution Van der Waals Stencil Lithography for 2D Transistors

Reliable wafer-scale integration of two-dimensional materials and metal electrodes with van der Waals contacts

Facile fabrication of 2D material multilayers and vdW heterostructures with multimodal microscopy and AFM characterization