Abstract:Polymer cover windows are important components of flexible OLED displays but they easily generate wrinkles because of their weak folding resistance. Increasing the polymer thickness can improve the folding resistance but it decreases the touch sensitivity. Thus, fabricating highly foldable and supersensitive polymer cover windows is still challenging. Here, by incorporating cellulose nanocrystals (CNCs) and zirconia (ZrO2) into colorless polyimide (CPI), we developed a highly foldable and supersensitive hybrid cover window. Inspired by the theory of elasticity, we added rigid CNCs into CPI to improve the elastic modulus and hence the foldability. ZrO2 was introduced to improve dielectric properties, which leads to improved touch sensitivity. After these modifications, the elastic modulus of the cover windows was increased from 1432 to 2221 MPa, whereas its dielectric constant was increased from 2.95 to 3.46 (@1 × 106 Hz), resulting in significantly enhanced foldability and sensitivity. Meanwhile, because of the nano size of CNCs and ZrO2, the hybrid cover windows exhibit excellent optical properties with the transmittance of ∼88.1%@550 nm and haze of 2.39%. With improved and balanced mechanical, dielectric, and optical properties, these hybrid cover windows overcome current cover windows' defects and could be widely used in next-generation flexible displays.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c01353.Scheme S1, schematic illustration of the synthesis procedure of the CPI; Figure S1, stress–strain curves of CNC; Figure S2, stress–strain curve of ZrO2/CPI and CNC/ZrO2/CPI with different ZrO2 and 1 wt % CNC loadings; Figure S3, pencil hardness of CPI, 3% ZrO2/CPI, and 3% CNC/ZrO2/CPI; Figure S4, nanoindentation characterization of the CPI, 3% ZrO2/CPI, and 3% CNC/ZrO2/CPI; Figure S5, schematic image of the folding test with an inward folding radius of 3 mm; Figure S6, magnified micrographs of cross sections of pure CPI, 3% ZrO2/CPI, and 3% CNC/ZrO2/CPI (PDF)This article has not yet been cited by other publications.

P‐65: The Thickness of Pressure Sensitive Adhesive and Modulus Influence on Foldable Display's Cover Mechanical Performance

A Soft Shape Memory Reversible Dry Adhesive

Flexible Electronics: Ultrathin Silicon Circuits with Strain‐Isolation Layers and Mesh Layouts for High‐Performance Electronics on Fabric, Vinyl, Leather, and Paper (adv. Mater. 36/2009)

Effect of temperature and humidity on mechanical properties and constitutive modeling of pressure-sensitive adhesives

Mechanical simulation of foldable AMOLED panel with a module structure

Experimental approach for measuring the peeling strength of a sheet bonded on a curved adherend with pressure sensitive adhesive and predicting the peeling resistance by finite element analysis

Design of Strain-Limiting Substrate Materials for Stretchable and Flexible Electronics

P‐5.7: Examining Pressure‐sensitive Damping Silicone Adhesive with Excellent Cushioning Capabilities for AMOLED Display

Experimental and Theoretical Study on Mechanical Properties of Porous PDMS

Shear Deformation Dominates in the Soft Adhesive Layers of the Laminated Structure of Flexible Electronics

Multilayer Substrate to Use Brittle Materials in Flexible Electronics

Silicone-polyurea based clear viscoelastic films for flexible displays, impact of diisocyanate, chain extender, soft segment molecular weight, and hard segment contents

Mechanical simulation and debonding risk analysis of OLED panels with optically clear adhesives

Selection of High Strength Encapsulant for MEMS Devices Undergoing High Pressure Packaging

Interfacial fatigue fracture of pressure sensitive adhesives

Highly Foldable, Super-Sensitive, and Transparent Nanocellulose/Ceramic/Polymer Cover Windows for Flexible OLED Displays

P‐7.4: Research on the Application of Liquid Optically Clear Adhesive for Foldable OLED

Flexibility properties of pressure-sensitive adhesive with different pattern of crosslinking density for electronic displays

Promising Soft Coating Material for Protection of Foldable Substrates Exposed to Corrosive Environment

Large strain mechanical behaviors of optically clear adhesives for flexible electronic devices under different temperature, humidity, and strain rates

Using an Interlayer to Toughen Flexible Colorless Polyimide-Based Cover Windows