Abstract:Highlights•Novel silane acrylates, USA and USLA were designed and synthesized by isocyanate-alcohol reaction.•The synthesized silane acrylate affected the chain arrangement of the acrylic PSA and determined the surface properties along with the silane group.•USA and USLA demonstrated the high cohesive force caused by the combined presence of the silane and urethane groups, which, in turn, improved the modulus of acrylic PSA.•The acrylic PSAs with USA and USLA showed a high strain recovery because of their highest cohesion and elasticity.In this study, novel silane acrylates, urethane silane acrylate (USA) and urethane silane linear acrylate (USLA), comprised of urethane and silane groups were designed and synthesized, and their effect on the surface properties, adhesion, and rheological behavior of acrylic PSA was evaluated. The introduction of the synthesized USA and USLA affected the chain arrangement, and at least 3 wt% of the silane acrylates was required to alter the surface properties (roughness and wettability). Compared to a commercial silane acrylate (SA), USA and USLA showed improved cohesion of the acrylic PSA aided by the urethane bond; however, the length of the terminal silane groups produced some variations. USA improved the cohesive properties of acrylic PSA due to its short chain, which further increased the peel strength of the acrylic PSA as compared to USLA (USA: 1363±173 gf/25 mm, USLA: 1258±132 gf/25 mm, based on 1 wt% content). However, at 3 wt% or more, excessive cohesion led to a decrease in the interaction with the substrate, thereby decreasing the peel strength. On the other hand, SA gradually increased the peel strength of the acrylic PSA, but cohesive failure occurred due to the insufficient increase in the cohesion. With respect to the flexibility of the acrylic PSAs, SA slightly improved the modulus of the high-temperature region aided by the silane group, and the recovery properties were increased from 10.8% to a maximum of 31% at 100% strain. In addition, the low cohesive properties resulted in very high stress relaxation properties (>99%). The effects of USA and USLA on flexibility were similar, but the high cohesive force further improved the elastic properties, resulting in better recovery than those imparted by SA (USA: 87∼89.4%, USLA: 56.6∼91.7%). Comparing the two urethane-based silane acrylates, the stress relaxation property of USA was lower than that of USLA, which is related to the cohesive property of the acrylic PSA. In addition, all of the synthesized acrylic PSAs showed excellent optical properties with transmittance > 98.1% and haze < 2.23%, indicating their potential for application in flexible displays.Graphical abstractDownload : Download high-res image (64KB)Download : Download full-size image

Silicone-polyurea based clear viscoelastic films for flexible displays, impact of diisocyanate, chain extender, soft segment molecular weight, and hard segment contents

Clear Viscoelastic Film Based on Low-Hard-Segment Silicone Polyurea Elastomers for Flexible Display Applications

Biomedical Segmented Polyurethanes Based on Polyethylene Glycol, Poly(ε-Caprolactone-co-d,l-lactide), and Diurethane Diisocyanates with Uniform Hard Segment: Synthesis and Properties

Stretchable PDMS Encapsulation Via SiO2 Doping and Atomic Layer Infiltration for Flexible Displays

UV-Cured Transparent Silicone Materials with High Tensile Strength Prepared from Hyperbranched Silicon-Containing Polymers and Polyurethane-Acrylates

(Digital Presentation) Design of High Barrier Property and Flexible Inorganic/Polymer Hybrid Film for Encapsulation of Flexible Electronics

Fabrication and performance of UV cured transparent silicone modified polyurethane–acrylate coatings with high hardness, good thermal stability and adhesion

Polymer-Dispersed Liquid Crystal Films on Flexible Substrates with Excellent Bending Resistance and Spacing Stability

Facile fabricated transparent anti-smudge coating with high hardness and excellent flexibility from MTQ and branched silicone resins

UV-Curable Polyurethane Acrylate Pressure-Sensitive Adhesives with High Optical Clarity for Full Lamination of TFT-LCD

The Effect of Silane Acrylate Containing Ethylene Glycol Chains on the Adhesive Performance and Viscoelastic Behavior of Acrylic Pressure-Sensitive Adhesives for Flexible Displays

Adhesion Performance and Recovery of Acrylic PSA with Acrylic Elastomer (AE) Blends via Thermal Crosslinking for Application in Flexible Displays

Flexibility properties of pressure-sensitive adhesive with different pattern of crosslinking density for electronic displays

Bendable Optical Diffuser Constructed by Interfacial Hydrogen-Bonding Polymer Complexation

Towards the optimal design of optically clear adhesives for flexible display

Synthesis and performance of hydroxyl‐terminated polysiloxane‐modified polyurethane acrylate films as potential flexible hydrophobic materials

High comprehensive properties of colorless transparent polyimide films derived from fluorine-containing and ether-containing dianhydride

Effect of silane acrylate on the surface properties, adhesive performance, and rheological behavior of acrylic pressure sensitive adhesives for flexible displays

Large strain mechanical behaviors of optically clear adhesives for flexible electronic devices under different temperature, humidity, and strain rates

Highly Conductive Polysiloxane Elastomers with Excellent Transparency, Resilience, and Stretchability

Short-Side-Chain Regulation of Colorless and Transparent Polyamide-Imides for Flexible Transparent Displays