Abstract:The two main polymorphs of boron nitride are hexagonal (h-BN) and cubic (c-BN) phases and both show attractive material properties to be employed under extreme environments. h-BN is also known as "white graphene" due to the matching hexagonal crystal symmetry and shows a layered structure which provides advantages as a lubricant material and as gate dielectrics for two-dimensional (2D) transistor channels. On the other hand, c-BN is analogous to another important elemental carbon material, diamond. While the mechanical strength of c-BN is lower than diamond, the thermal and chemical stability is even superior. Both h-BN and c-BN films are therefore strong candidates for applications under harsh ambient, including high-temperature, high-pressure, and corroding factors. BN films and coatings are conventionally grown using high-temperature CVD methods with typical substrate temperatures over 1000 o C. To reduce the deposition temperatures of this material while preserving the attractive crystal properties, alternative lower temperature physical and chemical vapor deposition strategies have been offered in the literature. Plasma-enhanced atomic layer deposition (PEALD) provides significant advantages over other methods such as precision thickness control, ultimate conformality, while reducing the growth temperature substantially. In our previous work, we had demonstrated the crystalline synthesis of h-BN films at substrate temperatures as low as 350 o C, while no growth was observed at lower substrate temperatures. In this work, we aim to demonstrate the feasibility of growing c-BN at substrate temperatures reaching 200 o C via a customized PEALD reactor featuring a large-diameter capacitively-coupled hollow-cathode plasma source with a relatively short source-to-substrate distance. We used Si(100), sapphire, and glass as the substrates to deposit the films. The growth temperature is kept between 150 and 250 °C, 10 sccm of N 2 flow is used as a carrier gas and Ar-purging gas flow was kept at 50 sccm. The triethylboron (TEB) precursor and various nitrogen plasma chemistries including different compositions of N 2 , H 2 , and Ar gases are utilized. The optimized growth condition is determined from in-situ monitored saturation studies, where the growth-per-cycle (GPC) parameter is noted for different precursor pulse time (15 and 30 ms), rf-plasma power (100 W to 250 W) and plasma-gas chemistries (N 2 -only, N 2 /H 2 , Ar/N 2 , Ar/N 2 /H 2 at varying ratios). While the 200 °C as-grown BN films exhibited nanocrystalline c-BN with relatively weak crystal peaks as verified by XRD measurements, vacuum annealing at 5 mTorr N 2 flow and 700 °C transformed the film structure into single-phase polycrystalline c-BN. The spectroscopic ellipsometer, x-ray reflectivity (XRR), and x-ray photoelectron spectroscopy (XPS) studies will be presented as well as the influence of post-deposition vacuum annealing to further improve the crystalline structure of c-BN films. Basic electrical properties of the grown BN films will be characterized using metal-insulator-semiconductor (MIS) diode temperature-dependent current-voltage (I-V) measurements. A specific effort will be devoted to enhance the as-grown film crystal properties via implementing novel atomic layer plasma annealing processes, which showed its potential for the ultrawide bandgap Ga 2 O 3 alloy. Another research question to be investigated is whether there is a possibility of tuning the material phase from cubic to hexagonal by carefully adjusting growth and in-situ Ar-plasma annealing conditions.

Substrate roughness and crystal orientation-controlled growth of ultra-thin BN films deposited on Cu foils

Investigating the role of Cu foil orientation in the growth of large BN films synthesized by reactive RF magnetron sputtering

Chemical Vapor Deposition Growth of Large-Scale Hexagonal Boron Nitride with Controllable Orientation

Large scale growth and characterization of atomic hexagonal boron nitride layers.

Growth of Polar Hexagonal Boron Nitride Monolayer on Nonpolar Copper with Unique Orientation.

Controlling the Orientations of H-Bn During Growth on Transition Metals by Chemical Vapor Deposition

Synthesis of atomically thin hexagonal boron nitride films on nickel foils by molecular beam epitaxy

Unidirectional domain growth of hexagonal boron nitride thin films

The Transition Metal Surface Passivated Edges of Hexagonal Boron Nitride (H-Bn) and the Mechanism of H-Bn's Chemical Vapor Deposition (CVD) Growth

Growth and characterization of uniformly distributed triangular single-crystalline hexagonal boron nitride grains on liquid copper surface

Study on the Growth Mechanism of Monolayer and Few-Layer Hexagonal Boron Nitride Films on Copper Foil

Low-Temperature Self-Limiting Growth of Cubic Boron Nitride Via Hollow-Cathode Plasma-Enhanced Atomic Layer Deposition

Boron nitride monolayer growth on vicinal Ni(111) surfaces systematically studied with a curved crystal

Growth mechanisms of monolayer hexagonal boron nitride (h-BN) on metal surfaces: theoretical perspectives

Growth of High-Quality Hexagonal Boron Nitride Single-Layer Films on Carburized Ni Substrates for Metal–Insulator–Metal Tunneling Devices

Application-Driven Synthesis and Characterization of Hexagonal Boron Nitride on Metal and Carbon Nanotube Substrates

Epitaxial chemical vapour deposition growth of monolayer hexagonal boron nitride on a Cu(111)/sapphire substrate

Wafer-scale CVD Growth of Monolayer Hexagonal Boron Nitride with Large Domain Size by Cu Foil Enclosure Approach

Understanding vapor phase growth of hexagonal boron nitride

Synthesis of sub-millimeter single-crystal grains of aligned hexagonal boron nitride on an epitaxial Ni film

Preparation of cubic boron nitride films by radio frequency magnetron sputtering and radio frequency ion plating