Abstract:BackgroundThe disc-blade-shaft integration rotor is a new type of structural component used to improve the performance of aeroengine. It usually suffer from severe vibration problems due to the low stiffness and low damping capacity. Therefore, the dynamic behavior is an important issue to be researched in the design process.PurposeThe main purpose of this work is to investigate the coupling vibration characteristics of multi-component and the influence of blade mistuning on the vibration localization of the integrated rotor.MethodsTo solve the large-scale calculation problem in dynamic analysis, the improved prestress hybrid interface component mode synthesis method is adopted to obtain reduced-order model of the complex rotor. By combining with nodal diameter spectrum (NDS) method, the natural characteristics and the forced vibration response of the integration rotor system are analyzed. Then, deterministic mistuning mode is introduced into the reduction model and vibration localization characteristics is investigated.ResultsCompared with the full finite element model, the error of frequency calculation with the reduced-order model of the integration rotor is relatively small. After considering prestress effects, the frequency of the integration rotor increases. The vibration response of the integrated rotor changes obviously when the parameters such as excitation order, coupling stiffness changed. ConclusionThe results of frequency and mode shapes verified the validity of the improved prestress hybrid interface component mode synthesis method. For the integration rotor, the multi-stage and multi-component coupled mode appears mainly with low nodal diameters, with the increase of ND number, the mode coupling degree among the dominated vibration stage blisk and other stage blisk decreases. Besides, the mistuning pattern, the excitation order and the inter-stage coupling stiffness have great influence on the vibration localization of the rotor system.

A Reduced Order Approach for the Vibration of Mistuned Bladed Disk Assemblies

Reduced Order Modeling and Vibration Analysis of Mistuned Bladed Disk Assemblies With Shrouds

Reduced Order Models and Coupling Characteristics of the Mistuned Blade-Disk-Shaft Integration Rotor

Application of the hard-coating damper on the mistuned blisk for passive vibration reduction

Advancing Mistuning Identification and Dynamic Modeling of Blisks Through Blade Detuning Tests

Multi-mode vibration attenuation of mistuned bladed disks by frictional tuned mass dampers array

The Amplification of Vibration Response Levels of Mistuned Bladed Disks: Its Consequences and Its Distribution in Specific Situations

Vibration response prediction of coated blisks under multi-point non-contact excitations using mistuning identification data

Dynamic characteristics of mistuned bladed disk system under rub-impact force

Vibration Suppression of a High-Speed Macro-Micro Integrated System Using Computational Optimal Control

Intentional blade mistuning to emulate the dynamic influence of split ring damper

Investigation on the parameter sensitivity of bladed assemblies undergoing mistuning features

A COUPLED VIBRATION ANALYSIS METHOD OF BLADED DISK MODELBASED ON EQUIVALENT BLADE GROUP OF ANNULAR PLATE WITH VARIABLE PARAMETERS

Modelling and vibration evaluations of rotational mistuning-connecting disk-drum coupling structures with partial hard-coating damping treatment

Multistage Coupling of Eight Mistuned Bladed Disk on a Solid Shaft: Part 1—Free Vibration Analysis

A reduced-order modeling framework for simulating signatures of faults in a bladed disk

Rapid Investigation of Blisk Mistuning Via Piezoelectric-Induced Stiffness Perturbations

Finite Element Model Updating in the Vibration of Bladed Disk: Shaft Assemblies

Control of mistuning level using hard coating for blisks based on mistuning identification technique

Vibration Characteristics Investigation of Hard-Coated Mistuned Blisk With Multi-Packets By Lumped Parameter Model

Reduced-Order Modeling in Rotordynamics and Its Robustness to Random Matrix Perturbation