Abstract:<p>The mistuning and excitations of the real engineering coated blisk are very complex and it is difficult to predict the vibration response. In this study, a numerical method of response prediction for coated blisks under multi-point non-contact excitations is proposed. The purpose of applying multi-point non-contact excitations to the blades is to get closer to the actual excitations condition of coated blisks. A non-rotating coated academic blisk is used as the research object, the component mode mistuning (CMM) reduced-order technique focusing on blade mistuning is improved to establish the response prediction model of the coated blisk, which includes quantized parameters of the blade substrate mistuning and the mistuning caused by coating. Meanwhile, the effects of the mass, stiffness and damping mistuning of the blisk substrate and the coating on the response are comprehensively considered in the model. In order to preserve the simulation accuracy of the response prediction model, the blade substrate mistuning and the mistuning caused by coating are identified, and the reduced-order model (ROM) is updated by the identification results of mass and stiffness mistuning. The response predictions of the numerical case and actual case of the non-rotating simplified coated academic blisk are carried out respectively. For the numerical case, the results of response prediction are in good agreement with the response calculation results of the high fidelity finite element model (FEM). Compared with the numerical case, the error between the predicted response and the tested response is larger, but this error level is sufficient to meet the requirements of engineering applications. All the results show that the proposed method is effective for predicting the response of the non-rotating coated academic blisks under multi-point excitations.</p>

Application of the hard-coating damper on the mistuned blisk for passive vibration reduction

Control of mistuning level using hard coating for blisks based on mistuning identification technique

Vibration Characteristics Investigation of Hard-Coated Mistuned Blisk With Multi-Packets By Lumped Parameter Model

Finite element modeling and analysis of dynamic characteristics of rotating coated blisks

Multi-mode vibration attenuation of mistuned bladed disks by frictional tuned mass dampers array

Study on the Forced Torsional Vibration Response of Multiple Rotating Blades with Underplatform Dampers

Nonlinear vibration analysis of coated blisks in the presence of stiffness mistuning identification

Modelling method and mistuning amplification analysis of the forced response for coated blisks in the presence of coatings-material nonlinearity

Dynamic Characteristics and Modeling of A New Magnetorheological Damper for Broadband Vibration Control

Research on Improved Magnetorheological Damper for Wide-Band Vibration Control

Vibration response prediction of coated blisks under multi-point non-contact excitations using mistuning identification data

Modelling and vibration evaluations of rotational mistuning-connecting disk-drum coupling structures with partial hard-coating damping treatment

Effects of nonlinear coatings on vibration characteristics of rotating blisks with mistuning features

A Reduced Order Approach for the Vibration of Mistuned Bladed Disk Assemblies

Intentional blade mistuning to emulate the dynamic influence of split ring damper

Active Vibration Control of Rotor System by A Magneto-Rheological Fluid Damper

Finite Element Modeling of Nonlinear Active and Passive Dampers Applied to Vibration Controls

Advancing Mistuning Identification and Dynamic Modeling of Blisks Through Blade Detuning Tests

A Disk-Type Magneto-Rheological Fluid Damper for Rotor System Vibration Control

A modeling method for a rotor system with an active floating ring squeeze film damper

Dynamic characteristics of mistuned bladed disk system under rub-impact force