Abstract:In general, only in tangential direction, friction motion between blade dampers is concerned for vibration analysis of mistuned bladed disk. However, in practical, excitation acting on blades inevitably causes normal movement at friction interface due to the existence of angle between excitation force and contact surface. This fact leads to a variation of normal force or even a result of contact separation, which determine the maximum static friction for tangential frictional vibration. In order to assess the realistic nonlinear forced vibration of mistuned disk assemblies subjected to actual excitation with nonlinear friction and contact, an efficient method is developed by using large-scale finite element model and two-dimensional friction model. In the proposed paper, attentions are paid on the realistic coupled vibration and the impact of variable normal vibration on forced response to a traveling wave excitation. Three types of mistuned parameters, including tangential stiffness of friction surface, initial shroud gap (corresponding to preload normal force), and structural stiffness of blades are taken into account for analyzing the effect of mistuning on the coupling vibration, especially for cases of contact separation. Furthermore, by means of curve fitting of amplitude variation of normal forces, the dependence of friction motion of bladed disk studied at circumferential resonance on variation of axial displacement, even with contact separation involved, is addressed. The results show a complex nonlinear vibration with friction and contact, especially a complex multiple unstable vibration observed with repeated nonlinear snap at circumferential resonance for the cases of contact separation. With regard to a small initial normal force, a large amplitude value of force variation can greatly reduce the maximum response amplitude for mistuned blades, which is worth to pay attentions for the vibration analysis of bladed disk with nonlinear friction and contact.

Vibration response prediction of coated blisks under multi-point non-contact excitations using mistuning identification data

Control of mistuning level using hard coating for blisks based on mistuning identification technique

Nonlinear vibration analysis of coated blisks in the presence of stiffness mistuning identification

Modelling method and mistuning amplification analysis of the forced response for coated blisks in the presence of coatings-material nonlinearity

Effects of nonlinear coatings on vibration characteristics of rotating blisks with mistuning features

Finite element modeling and analysis of dynamic characteristics of rotating coated blisks

Study on the Forced Torsional Vibration Response of Multiple Rotating Blades with Underplatform Dampers

Vibration Characteristics Investigation of Hard-Coated Mistuned Blisk With Multi-Packets By Lumped Parameter Model

Vibration Analysis of Mistuned Damped Blades with Nonlinear Friction and Contact

Application of the hard-coating damper on the mistuned blisk for passive vibration reduction

Advancing Mistuning Identification and Dynamic Modeling of Blisks Through Blade Detuning Tests

Nonlinear Dynamics Analysis Of Mistuned Turbine Bladed Disks With Damped Shrouds

Vibrational Response Analysis of Rotating Mistuned Bladed-Disk Using a Deconvolution Method Based on Blade Tip Timing

Modelling and vibration evaluations of rotational mistuning-connecting disk-drum coupling structures with partial hard-coating damping treatment

The Mechanism on Prediction of Transient Maximum Amplitude for Tuned and Mistuned Blisks

Investigation on the Vibration Localization of Mistuned Bladed Disk with Frictional Contact

Detection of blade substrate crack parameters of hard-coated blisk based on mistuning identification technology

A Reduced Order Approach for the Vibration of Mistuned Bladed Disk Assemblies

Investigation on the parameter sensitivity of bladed assemblies undergoing mistuning features

Traveling-wave vibrations of disc-drum rotors with PSC under mistuning-coupled conditions

Multi-mode vibration attenuation of mistuned bladed disks by frictional tuned mass dampers array